ISO Road vehicles Diagnostics 規格調査中 100規格、100記事をめざして。
もうすぐ20文献になりそう。そこで、補助資料を作り始める。
一つは、
ISO Diagnostics 用語定義(Terms and Definition)と短縮名(short name)集め
ここでは、文献（Normative Reference and Bibliography）を集める
1. Normative Reference
1.1
ISO/IEC 7498-1:1994, Information processing systems — Open systems interconnection — Basic reference model
ISO 13400-3, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3
ISO/IEC/IEEE 8802-3, Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet
IETF RFC 768, User Datagram Protocol
IETF RFC 791:1981, Internet Protocol — DARPA Internet Program — Protocol Specification
IETF RFC 792, Internet Control Message Protocol — DARPA Internet Program — Protocol Specification
IETF RFC 793, Transmission Control Protocol — DARPA Internet Program — Protocol Specification
IETF RFC 826, An Ethernet Address Resolution Protocol
IETF RFC 1122, Requirements for Internet Hosts — Communication Layers
IETF RFC 2131, Dynamic Host Configuration Protocol
IETF RFC 2132, DHCP Options and BOOTP Vendor Extensions
IETF RFC 2460, Internet Protocol, Version 6 (IPv6) — Specification
IETF RFC 2375, IPv6 Multicast Address Assignments
IETF RFC 3315, Dynamic Host Configuration Protocol for IPv6 (DHCPv6)
IETF RFC 3484, Default Address Selection for Internet Protocol version 6 (IPv6)
IETF RFC 3927, Dynamic Configuration of IPv4 Link-Local Addresses
IETF RFC 4291, IP Version 6 Addressing Architecture
IETF RFC 4443, Internet Control Message Protocol (ICMP v6) for the Internet Protocol Version 6 (IPv6) Specification
IETF RFC 4492, Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS)
IETF RFC 4702, The Dynamic Host Configuration Protocol (DHCP) Client Fully Qualified Domain Name (FQDN) Option
IETF RFC 4861, Neighbor Discovery for IP version 6 (IPv6)
IETF RFC 4862, IPv6 Stateless Address Autoconfiguration
IETF RFC 5246, The Transport Layer Security (TLS) Protocol Version 1.2
IETF RFC 8446:2018, The Transport Layer Security (TLS) Protocol Version 1.3
1.2
IEC 60950-1, Information technology equipment — Safety — Part 1: General requirements
IEEE 802.3-2015, IEEE Standard for Ethernet
1.3
ISO 13400-1, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — General information and use case definition
ISO 13400-3, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3
ISO 15031-3, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: specification and use
SAE J1962-09/2015, Diagnostic Connector
1.4
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
ISO 7816-8, Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for
ISO/IEC 9594-8:2020 Information technology — Open systems interconnection — Part 8: The Directory: Public-key and attribute certificate frameworks
https://www.iso.org/standard/80325.html
https://www.iso.org
ISO/IEC 9594-8:2020/COR 1:2021
Information technology — Open systems interconnection — Part 8: The Directory: Public-key and attribute certificate frameworks — Technical Corrigendum 1
https://www.iso.org/standard/82711.html
https://www.iso.org
IEEE 754-2008, IEEE Standard for Floating-Point Arithmetic
suspended by
IEEE 754-2019 - IEEE Standard for Floating-Point Arithmetic
IEEE 1609.2, Standard for Wireless Access in Vehicular Environments — Security Services for Applications and Management Messages
IEEE 1609.2.1-2020 - IEEE Standard for Wireless Access in Vehicular En...
https://standards.ieee.org
X.509, Information technology — Open Systems Interconnection — The Directory: Public-key and attribute certificate frameworks
ITU-T X.509 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU
Corrigendum 1 (10/2021)
https://www.itu.int/rec/dologin.asp?lang=e&id=T-REC-X.509-202110-I!Cor1!PDF-E&type=items
https://www.itu.int
RFC 5280, Internet Engineering Task Force — Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile
RFC 5280 - Internet X.509 Public Key Infrastructure Certificat...
https://datatracker.ietf.org
RFC 5755, Internet Engineering Task Force — An Internet Attribute Certificate Profile for Authorization © ISO 2020 – All rights reserved
RFC 5755 - An Internet Attribute Certificate Profile for Autho...
https://datatracker.ietf.org
1.5
ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer
1.6
ISO 13400 (all parts), Road vehicles — Diagnostic communication over Internet Protocol (DoIP)
ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
1.7
ISO 9141-2:1994, Road vehicles — Diagnostic systems — Part 2: CARB requirements for interchange of digital information
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
ISO 14230-2, Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer
ISO 14230-4:2000, Road vehicles — Diagnostic systems — Keyword Protocol 2000 — Part 4: Requirements for emission-related systems
ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
ISO 15031-2, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Guidance on terms, definitions, abbreviations and acronyms
SAE J1930-DA, Digital Annex of Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
SAE J2012-DA, Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
1.8
ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
ISO 11898-1, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
ISO 15031-3, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use
ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
1.9
ISO 11898 (all parts), Road vehicles — Controller area network (CAN)
ISO 15031-3, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use
ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Networks (DoCAN) — Part 4: Requirements for emissions-related systems
1.10
ISO 14229-1:—1), Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer interfaces
ISO 27145-1, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 1: General information and use case definition
ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary
ISO 27145-4, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment
SAE J1939, Companion Spreadsheet
SAE J1939-73:2010, Application layer — Diagnostics
SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
SAE J2012-DA, Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
1.11
ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer interfaces
ISO 27145-1, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 1: General information and use case definition
ISO 27145-2, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary (CDD)
ISO 27145-4, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment
1.12
ISO 13400-2:2012, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services
ISO 13400-3,1 Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3
ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
ISO 15765-2,1) Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
ISO 27145-1, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 1: General information and use case definition
ISO 27145-2, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary
ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary
1.13
ISO 15031-5, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
ISO 15031-6, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
SAE J1930-DA, J1930 Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spreadsheet
1.14
SAE J1962:2015, Diagnostic connector
1.15
SO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
ISO 27145-2, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary
ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary
ISO 27145-4, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment
1.16
ISO/IEC 10731:1994, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
ISO 15031-2, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Guidance on terms, definitions, abbreviations and acronyms
ISO 15031-5, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
1.17
ISO 7637-1:1990, Road vehicles — Electrical disturbance by conduction and coupling — Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage — Electrical transient conduction along supply lines only.
ISO 9141:1989, Road vehicles — Diagnostic systems — Requirements for interchange of digital information.
SAE J1962, Diagnostic Connector.
SAE J1978, OBD II Scan Tool.
SAE J1979, E/E Diagnostic Test Modes.
SAE J2012, Format and Messages for Diagnostic Trouble Codes.
California Code of Regulation, Title 13, 1968.1, Malfunction and Diagnostic Systems Requirements.
1.18
ISO 1219, Fluid power systems and components — Graphic symbols.
ISO 2575, Road vehicles — Symbols for controls, indicators and tell-tales.
ISO 2972, Numerical control of machines — Symbols.
ISO 7000, Graphical symbols for use on equipment — Index and synopsis.
IEC Publication 417, Graphical symbols for use on equipment — Index, survey and compilation of the single sheets.
IEC Publication 617-4, Graphical symbols for diagrams — Part 4: Passive components.
1.19
ISO 4092 : 1988, Road vehicles — Diagnostic systems for motor vehicles — Vocabulary.
ISO/TR 7637-0 : 1984, Road vehicles — Electrical interference by conduction and coupling — Part 0: General and definitions.
1.20
ISO 9141-2:1994, Road vehicles — Diagnostic systems — Part 2: CARB requirements for interchange of digital information, and its Amendment 1:1996.
ISO 15031-5:-1), Road vehicles — Emission-related diagnostics — Communication between vehicle and external equipment — Part 5: Emission-related diagnostic services.
SAE J1962:1995, Diagnostic Connector.
SAE J1978:1994, OBD II Scan Tool.
1.21
ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model — Part 1
ISO 11898-1:20152, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
1.22
ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
ISO 15765-1, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 1: General information and use case definition
ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
1.25
2.1 Identical Recommendations and International Standards
ITU-T Recommendation X.207 (1993) | ISO/IEC 9545; 1993, Information Technology — Open Systems Interconnection — Application Layer structure.
2.2 Paired Recommendations | International Standards equivalent in technical content
CCITT Recommendation X.200 (1988), Reference model of open systems for CCITT applications.
ISO/IEC 7498:1984, Information technology — Open Systems Interconnection — Basic Reference Model.
1.26
ISO 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
ISO 14229-3, Road vehicles — Unified diagnostic services (UDS) — Part 3: Unified diagnostic services on CAN implementation (UDSonCAN)
ISO 20794 (all parts), Road vehicles — Clock extension peripheral interface (CXPI)
2. Bibliography
2.1
[1] ISO/IEC 10731:1994, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[2] ISO 13400-4, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 4: Ethernet-based high-speed data link connector
[3] ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer
[4] ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
[5] ISO 14229-5, Road vehicles — Unified diagnostic services (UDS) — Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP)
[6] ISO 20730-1, Road vehicles — Vehicles roadworthiness interface for electronic Periodical Technical Inspection (ePTI) — Part 1: Communication requirements
[7] ISO 22901-1, Road vehicles — Open diagnostic data exchange (ODX) — Part 1: Data model specification
[8] ISO 27145-1, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 1: General information and use case definition
[9] ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary
[10] IANA Ports, Port Numbers, IANA. Available at: http://www.iana.org/assignments/port-numbers (last updated 29 November 2011)
[11] IANA Protocols, Protocol Numbers, IANA. Available at: http://www.iana.org/assignments/protocol-numbers (last updated 1 November 2011)
[12] IEEE EUI-48, Guidelines, Guidelines for use of a 48-bit Extended Unique Identifier (EUI-48TM). Available at: http://standards.ieee.org/develop/regauth/tut/eui48.pdf
[13] IETF RFC 147, The Definition of a Socket
[14] IETF RFC 3942, Reclassifying Dynamic Host Configuration Protocol version 4 (DHCPv4) Options
[15] IETF RFC 4213, Basic Transition Mechanisms for IPv6 Hosts and Routers
[16] IETF RFC 5220, Problem Statement for Default Address Selection in Multi-Prefix Environments: Operational Issues of RFC 3484 Default Rules
[17] IETF RFC 5735, Special Use IPv4 Addresses
[18] IETF RFC 6298, Computing TCP’s Retransmission Timer
[19] ISO 3779, Road vehicles — Vehicle identification number (VIN) — Content and structure
2.2
[1] ISO 13400-1, Road vehicles - Diagnostic communication over Internet Protocol (DoIP) — Part 1: General information and use case definition
[2] ISO 13400-2, Road vehicles - Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services
[3] ISO 13400-4, Road vehicles - Diagnostic communication over Internet Protocol (DoIP) — Part 4: Ethernet diagnostic connector
[4] ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and Requirements
[5] ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
[6] ISO 14229-5, Road vehicles — Unified diagnostic services (UDS) — Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP)
[7] ISO 27145-2, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary
[8] ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary
[9] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model — Part 1
[10] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[11] SAE J1930-DA, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spreadsheet
[12] SAE J1939DA, Digital Annex (SPNs)
[13] SAE J1939-73:2010, Application Layer — Diagnostics
[14] SAE J1962, Diagnostic Connector
[15] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[16] SAE J2012-DA, Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
[17] TIA/EIA-568-B, Commercial Building Telecommunications Cabling Standard
2.3
[1] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
2.4
[1] ISO 4092:1988/Cor.1:1991, Road vehicles — Diagnostic systems for motor vehicles — Vocabulary — Technical Corrigendum 1
[2] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
[3] ISO/IEC 7618-8:2006, Identification cards — Integrated circuit cards
[4] ISO/TR 8509:1987, Information processing systems — Open Systems Interconnection — Service conventions
[5] ISO/IEC 9798-2, IT Security techniques — Entity authentication — Part 2: Mechanisms using authenticated encryption
[6] ISO/IEC 9798-3, IT Security techniques — Entity authentication — Part 3: Mechanisms using digital signature techniques
[7] ISO/IEC 9798-4, Information technology — Security techniques — Entity authentication — Part 4: Mechanisms using a cryptographic check function
[8] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[9] ISO 11992-4, Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostics
[10] ISO 14229-3, Road vehicles — Unified diagnostic services (UDS) — Part 3: Unified diagnostic services on CAN implementation (UDSonCAN)
[11] ISO 14229-4, Road vehicles — Unified diagnostic services (UDS) — Part 4: Unified diagnostic services on FlexRay implementation (UDSonFR)
[12] ISO 14229-5, Road vehicles — Unified diagnostic services (UDS) — Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP)
[13] ISO 14229-6, Road vehicles — Unified diagnostic services (UDS) — Part 6: Unified diagnostic services on K-Line implementation (UDSonK-Line)
[14] ISO 14229-7, Road vehicles — Unified diagnostic services (UDS) — Part 7: UDS on local interconnect network (UDSonLIN)
[15] ISO 14229-8, Road vehicles — Unified diagnostic services (UDS) — Part 8: Unified diagnostic services on clock extension peripheral interface implementation (UDSonCXPI)
[16] ISO 15031-2, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Guidance on terms, definitions, abbreviations and acronyms
[17] ISO 15031-6, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
[18] ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
[19] ISO 22901-1, Road vehicles — Open diagnostic data exchange (ODX) — Part 1: Data model specification
[20] ISO 26021-2, Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 2: Communication requirements
[21] ISO 27145-2, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (VOBD) communication requirements — Part 2: Common data dictionary
[22] ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (VOBD) communication requirements — Part 3: Common message dictionary
[23] SAE J1939:2011, Serial Control and Communications Heavy Duty Vehicle Network — Top Level Document
[24] SAE J1939-73:2010, Application Layer — Diagnostics
[25] ISO 10681-2, Road vehicles — Communication on FlexRay — Part 2: Communication layer services
[26] ISO 11898-1, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
[27] ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[28] ISO 13400-2, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services
[29] ISO 13400-3, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3
[30] ISO 14230-1, Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 1: Physical layer
[31] ISO 14230-2, Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer
[32] ISO 15031-4, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment
[33] ISO 15031-5, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
[34] ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
[35] ISO 16844-7, Road vehicles — Tachograph systems — Part 7: Parameters
[36] ISO 17458-2, Road vehicles — FlexRay communications system — Part 2: Data link layer specification
[37] ISO 17458-4, Road vehicles — FlexRay communications system — Part 4: Electrical physical layer specification
[38] ISO 17987-2, Road vehicles — Local Interconnect Network (LIN) — Part 2: Transport protocol and network layer services
[39] ISO 17987-3, Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification
[40] ISO 17987-4, Road vehicles — Local Interconnect Network (LIN) — Part 4: Electrical physical layer (EPL) specification 12 V/24 V
[41] ISO 20794-3, Road vehicles — Clock extension peripheral interface (CXPI) — Part 3: Transport and network layer
[42] ISO 20794-4, Road vehicles — Clock extension peripheral interface (CXPI) — Part 4: Data link layer and physical layer
[43] ISO 26021-2, Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 2: Communication requirements
[44] ISO 27145-4, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment
[45] IEEE 802.3, IEEE Standard for Ethernet
[46] SAE J1978, OBD II Scan Tool — Equivalent to ISO/DIS 15031-4:December 14, 2001
[47] SAE J1979, E/E Diagnostic Test Modes
[48] SAE J1979-2, Compliant OBDII Scan Tool
[49] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[50] SAE J2012, Diagnostic Trouble Code Definitions
[51] SAE J2534, Recommended Practice for Pass-Thru Vehicle Programming (STABILIZED Jul 2019)
[52] ISO 15765-5, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 5: Specification for an in-vehicle network connected to the diagnostic link connector
2.5
[1] ISO/IEC 10731:1994, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[2] ISO 10681-2, Road vehicles — Communication on FlexRay — Part 2: Communication layer services
[3] ISO 13400-2, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services
[4] ISO 14230-2, Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer
[5] ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
[6] ISO 20794-3, Road vehicles — Clock extension peripheral interface (CXPI) — Part 3: Transport and network layer
2.6
[1] ISO 7498-1:1984, Information processing systems — Open systems interconnection — The basic model
[2] ISO 11898-1, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
[3] ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[4] ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
[5] ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
[6] ISO/IEC 10731:1994, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[7] SAE J1930-DA, Digital Annex of Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spreadsheet
[8] SAE J1939, Companion Spreadsheet (CS1939)
[9] SAE J1939-73:2010, Application layer — Diagnostics
[10] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[11] SAE J2012-DA, Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
2.7
Bibliography
[1] ISO 11898-1, Road vehicles Controller area network (CAN) — Part 1: Data link layer and physical signalling
[2] ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[3] ISO 14230-1, Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 1: Physical layer
[4] ISO 15031-3, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits, specification and use
[5] ISO 15031-1, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information and use case definition
[6] ISO 15031-4, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment
[7] ISO 15031-6, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
[8] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model — Part 1
[9] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[10] SAE J1850, Class B Data Communications Network Interface
[11] SAE J1978, OBD II Scan Tool
2.8
[1] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[2] ISO 15031-5, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
[3] ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary
[4] SAE J1979, E/E Diagnostic Test Modes — OBDonEDS
[5] SAE J1979-2, E/E Diagnostic Test Modes — OBDonUDS
[6] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[7] SAE J2178-1, Class B data communication network messages detailed header formats and physical address assignments
2.9
[1] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
[2] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
2.10
[1] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
[2] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[3] ISO 11898-1, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
[4] ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[5] ISO 13400 (all parts), Road vehicles — Diagnostic communication over Internet Protocol (DoIP)
[6] ISO 15031 (all parts), Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics
[7] ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Networks (DoCAN) — Part 2: Transport protocol and network layer services
[8] ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
[9] SAE J1930-DA, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spreadsheet
[10] SAE J1939-03, On-Board Diagnostics Implementation Guide
[11] IEEE 802.3, IEEE Standard for Information technology — Specific requirements — Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
[12] CCR 1968.2 Title 13, California Code Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD II), available at: http://www.arb.ca.gov/msprog/obdprog/obdregs.htm
[13] CCR 1971.1 Title 13, California Code Regulations, Section 1971.1, On-Board Diagnostic System Requirements for 2010 and Subsequent Model-Year Heavy-Duty Engines (HD OBD), available at: http://www.arb.ca.gov/msprog/obdprog/hdobdreg.htm
[14] Global Technical Regulation No. 5, Technical Requirements for On-Board Diagnostic Systems (OBD) for Road Vehicles. (established in the Global Registry on 15 November 2006); document: ECE/TRANS/180/Add.5 dated 23 January 2007, available at: http://live.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29registry/gtr5.html
2.11
[1] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
[2] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[3] ISO 11898-1, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
[4] ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[5] ISO 13400 (all parts), Road vehicles — Diagnostic communication over Internet Protocol (DoIP)
[6] ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
[7] ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
[8] ISO 27145-61), Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment
[9] IEEE 802.3, IEEE Standard for information technology — Specific requirements — Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
[10] SAE J1930-DA, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spreadsheet
[11] SAE J1939, Companion Spreadsheet
[12] SAE J1939-73:2010, Application layer — Diagnostics
[13] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[14] SAE J2012-DA, Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
[15] 13 CCR § 1968.2, California Code of Regulations, Title 13: Motor Vehicles, Division 3: Air Resources Board, Chapter 1: Motor Vehicle Pollution Control Devices, Article 1: General Provisions, Section 1968.2: Malfunction and Diagnostic System Requirements — 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines. Available at: http://www.arb.ca.gov/msprog/obdprog/obdregs.htm
[16] 13 CCR § 1971.1, California Code of Regulations, Title 13: Motor Vehicles, Division 3: Air Resources Board, Chapter 1: Motor Vehicle Pollution Control Devices, Article 1: General Provisions, Section 1971.1: On-Board Diagnostic System Requirements — 2010 and Subsequent Model-Year Heavy-Duty Engines. Available at: http://www.arb.ca.gov/msprog/obdprog/hdobdreg.htm
[17] Global technical regulation No. 5 (GTR No. 5), Technical requirements for on-board diagnostic systems (OBD) for road vehicles. Established in the Global Registry on 15 November 2006. Document ECE/TRANS/180/Add.5, 23 January 2007. Available at: http://www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29registry/gtr5.html
2.12
[1] ISO 11898-1, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
[2] ISO 11898-2,2 Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[3] ISO 13400-1:2011, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 1: General information and use case definition
[4] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
[5] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[6] IEEE 802.3, IEEE Standard for Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
[7] SAE J1930-DA, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spreadsheet
[8] SAE J1939:2011, Serial Control and Communications Heavy Duty Vehicle Network — Top Level Document
[9] SAE J1939-DA, Digital Annex of SPNs
[10] SAE J1939-03, On Board Diagnostics Implementation Guide
[11] SAE J1939-73:2010, Application Layer — Diagnostics
[12] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[13] SAE J2012-DA, Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
[14] 13 CCR § 1968.2, California Code of Regulations, Title 13: Motor Vehicles, Division 3: Air Resources Board, Chapter 1: Motor Vehicle Pollution Control Devices, Article 1: General Provisions, Section 1968.2: Malfunction and Diagnostic System Requirements — 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines. Available at: http://www.arb.ca.gov/msprog/obdprog/obdregs.htm
[15] 13 CCR § 1971.1, California Code of Regulations, Title 13: Motor Vehicles, Division 3: Air Resources Board, Chapter 1: Motor Vehicle Pollution Control Devices, Article 1: General Provisions, Section 1971.1: On-Board Diagnostic System Requirements — 2010 and Subsequent Model-Year Heavy-Duty Engines. Available at: http://www.arb.ca.gov/msprog/obdprog/hdobdreg.htm
[16] Global technical regulation No. 5 (GTR No. 5), Technical requirements for on-board diagnostic systems (OBD) for road vehicles. Established in the Global Registry on 15 November 2006. Document ECE/TRANS/180/Add.5, 23 January 2007. Available at: http://www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29glob_registry.html
2.13
[1] ISO 9141-2:1994, Road vehicles — Diagnostic systems — Part 2: CARB requirements for interchange of digital information
[2] ISO 9141-2:1994/Amd.1:1996, Road vehicles — Diagnostic systems — Part 2: CARB requirements for interchange of digital information — Amendment 1
[3] ISO 14230-4:2000, Road vehicles — Keyword protocol 2000 for diagnostic systems — Part 4: Requirements for emission-related systems
[4] ISO 15031-1, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information and use case definition
[5] ISO 15031-3, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits, specification and use
[6] ISO 15031-4, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment
[7] ISO 15031-7, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7: Data link security
[8] ISO 15765-4, Road vehicles — Diagnostics over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
[9] SAE J1850:2001, Class B Data Communications Network Interface
[10] SAE J1930, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
[11] SAE J1962, Diagnostic Connector
[12] SAE J1978, OBD II Scan Tool
[13] SAE J1979, E/E Diagnostic Test Modes
[14] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[15] SAE J2012, Diagnostic Trouble Code Definitions
[16] SAE J2012-DA, Digital Annex of Diagnostic Trouble Code Definitions
[17] SAE J2186, E/E Data Link Security
2.14
[1] ISO 6722-3:19931, Road vehicles — Unscreened low-tension cables — Part 3: Conductor sizes and dimensions for thick-wall insulated cables
[2] ISO 6722-4:19932, Road vehicles — Unscreened low-tension cables — Part 4: Conductor sizes and dimensions for thin-wall insulated cables
[3] ISO 9141-2, Road vehicles — Diagnostic systems — Part 2: CARB requirements for interchange of digital information
[4] ISO 13400-3, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: IEEE 802.3 based wired vehicle interface
[5] ISO 13400-43, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 4: Ethernet-based high-speed data link connector
[6] ISO 14230-4, Road vehicles — Diagnostic systems — Keyword Protocol 2000 — Part 4: Requirements for emission-related systems
[7] ISO 15031-1, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information and use case definition
[8] ISO 15031-4, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment
[9] ISO 15765-4, Road vehicles — Diagnostics on Controller Area Network (CAN) — Part 4: Requirements for emissions-related systems
[10] ISO 26021-4, Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 4: Additional communication line with bidirectional communication
[11] ISO 26021-5, Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 5: Additional communication line with pulse width modulated signal
[12] SAE J1850, Class B Data Communications Network Interface
[13] IEEE 802.3, IEEE Standard for Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
2.15
[1] ISO 11898-1, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
[2] ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[3] ISO 13400 (all parts), Road vehicles — Diagnostic communication over Internet Protocol (DoIP)
[4] ISO 15031 (all parts), Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics
[5] ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
[6] ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
[7] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
[8] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[9] IEEE 802.3, IEEE Standard for Information technology — Specific requirements — Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
[10] SAE J1930-DA, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spreadsheet
[11] SAE J1939-73, Recommended Practice for a Serial Control and Communications Vehicle Network — Application Layer Diagnostics
[12] SAE J1939, Companion Spreadsheet
[13] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[14] SAE J2012-DA, Diagnostic Trouble Code Definitions
[15] CCR 1968.2 Title 13, California Code Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD II), available at: http://www.arb.ca.gov/msprog/obdprog/obdregs.htm
[16] CCR 1971.1 Title 13, California Code Regulations, Section 1971.1, On-Board Diagnostic System Requirements for 2010 and Subsequent Model-Year Heavy-Duty Engines (HD OBD), available at: http://www.arb.ca.gov/msprog/obdprog/hdobdreg.htm
[17] Global Technical Regulation No. 5, Technical Requirements for On-Board Diagnostic Systems (OBD) for Road Vehicles. United Nations Economic and Social Council, 15 November 2006, document: ECE/TRANS/180/Add.5 dated 23 January 2007, available at: http://www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29registry/gtr5.html
2.16
[1] ISO 27145-2, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary
[2] ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
[3] ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
[4] ISO 7498-1:1994, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
[5] ISO 15031-1, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information and use case definition
[6] SAE J1930, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
[7] SAE J1930-DA, Digital Annex of Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
[8] SAE J1979, E/E Diagnostic Test Modes
[9] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[10] SAE J2012, Diagnostic Trouble Code Definitions
[11] SAE J2012-DA, Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
2.18
no bibliography
2.19
T.B.D.
2.20
[1] ISO 15031-3:— 2), Road vehicles — Emission-related diagnostics — Communication between vehicle and external equipment — Part 3: Diagnostic connector.
[2] ISO 15031-4:— 2), Road vehicles — Emission-related diagnostics — Communication between vehicle and external equipment — Part 4: Scanning tool.
[3] SAE J1930:1995, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations and Acronyms.
[4] SAE J2178/1:1995, Class B Data Communication Network Messages — Detailed Header formats and Physical Address Assignments
2.21
[1] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[2] ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[3] ISO 11898-3, Road vehicles — Controller area network (CAN) — Part 3: Low-speed, fault-tolerant, medium-dependent interface
[4] ISO 11898-4, Road vehicles — Controller area network (CAN) — Part 4: Time-triggered communication
[5] ISO 11898-5, Road vehicles — Controller area network (CAN) — Part 5: High-speed medium access unit with low-power mode
[6] ISO 11898-6, Road vehicles — Controller area network (CAN) — Part 6: High-speed medium access unit with selective wake-up functionality
[7] ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
[8] ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
[9] ISO 14229-3, Road vehicles — Unified diagnostic services (UDS) — Part 3: Unified diagnostic services on CAN implementation (UDSonCAN)
[10] ISO 15031-2, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Guidance on terms, definitions, abbreviations and acronyms
[11] ISO 15031-5, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
[12] ISO 15031-6, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
[13] ISO 15765-1, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 1: General information and use case definition
[14] ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
[15] ISO 27145-2, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary
[16] ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary
[17] ISO 27145-4, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment
[18] SAE J1930, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations and Acronyms
[19] SAE J1939:2011, Serial Control and Communications Heavy Duty Vehicle Network — Top Level Document
[20] SAE J1939-73:2010, Application layer — Diagnostics
[21] SAE J1979, E/E Diagnostic Test Modes
[22] SAE J2012, Diagnostic Trouble Code Definitions
2.22
[1] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model — The Basic Mode
[2] ISO/IEC 10731:1994, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[3] ISO 11898-1, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
[4] ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[5] ISO 11898-3, Road vehicles — Controller area network (CAN) — Part 3: Low-speed, fault-tolerant, medium dependent interface
[6] ISO 11898-5, Road vehicles — Controller area network (CAN) — Part 5: High-speed medium access unit with low-power mode
[7] ISO 13400 (all parts), Road vehicles — Communication between test equipment and vehicles over Internet Protocol
[8] SAE J1930-DA, Digital Annex of Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spreadsheet
[9] SAE J1939, Companion Spreadsheet (CS1939)
[10] SAE J1939-73:2010, Recommended Practice for a Serial Control and Communication Vehicle Network — Application layer — Diagnostics
[11] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[12] SAE J2012-DA, Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
2.26
[1] ISO/IEC 10731:1994, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[2] ISO 11898 (all parts), Road vehicles — Controller area network (CAN)
[3] ISO 15765 (all parts), Road vehicles — Diagnostic communication over Controller Area Network (DoCAN)
対象規格一覧
1
ISO 13400-2:2019 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services
2
ISO 13400-3, Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
3
ISO 13400-4:2016 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector
4
ISO 14229-1:2020 Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer
5
ISO 14229-2:2021 Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
6
ISO 14229-5:2013 Road vehicles - Unified diagnostic services (UDS) - Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP)
7
ISO 15031-5:2015 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
8
ISO 15765-4:2021 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 4: Requirements for emissions-related systems
9
ISO 15765-5:2021 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 5: Specification for an in-vehicle network connected to the diagnostic link connector
10
ISO 27145-2:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 2: Common data dictionary
11
ISO 27145-3 ISO 27145-3:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 3: Common message dictionary
12
ISO 27145-4 ISO 27145-4:2016 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 4: Connection between vehicle and test equipment
13
ISO 15031-2:2010, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Guidance on terms, definitions, abbreviations and acronyms
14
ISO 15031-3:2016 Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use
15
ISO 27145-1:2012 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 1: General information and use case definition
##16
ISO 15031-6:2015 Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
17
ISO 9141-2:1994, Road vehicles - Diagnostic systems - Part 2: CARB requirements for interchange of digital information
18
ISO 7639:1985 Road vehicles - Diagnostic systems - Graphical symbols
19
ISO 9141:1989 Road vehicles - Diagnostic systems - Requirements for interchange of digital information
20
ISO 9141-3:1998 Road vehicles - Diagnostic systems - Part 3: Verification of the communication between vehicle and OBD II scan tool
21
ISO 15765-2, Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 2: Transport protocol and network layer services
22
ISO 14229-3:2012 Road vehicles - Unified diagnostic services (UDS) - Part 3: Unified diagnostic services on CAN implementation (UDSonCAN)
23
California Code of Regulation, Title 13, 1968.1, Malfunction and Diagnostic Systems Requirements.
24
SEA J1850 Class B Data Communications Network Interface
25
ISO/IEC 10731:1994, Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition of OSI services
26
ISO 14229-8:2020 Road vehicles - Unified diagnostic services (UDS) - Part 8: UDS on Clock eXtension Peripheral Interface (UDSonCXPI)
参考資料
@kazuo_reve 自動車の故障診断に関連するプログラマーになりたての方が参照するとよさそうな情報
@kazuo_reve AUTOSARのClassic PlatformとAdaptive PlatformにおけるDiagnosticsの違いを整理
自己参照
ISO Road vehicles Diagnostics 規格調査中 100規格、100記事をめざして。
ISO Diagnostics 文献（Normative Reference and Bibliography）集め
ISO Diagnostics 用語定義(Terms and Definition)と短縮名(short name)集め
ISO/IEC OSIに学ぶ
ISO 14229-1:2020 Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer
@kazuo_reveさんの「自動車の故障診断に関連するプログラマーになりたての方が参照するとよさそうな情報」の読み方
@kazuo_reve「AUTOSARのClassic PlatformとAdaptive PlatformにおけるDiagnosticsの違いを整理」で慌てて
＜この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。＞
#文書履歴
ver. 0.01 初稿 20220206
最後までおよみいただきありがとうございました。
いいね 💚、フォローをお願いします。
###Thank you very much for reading to the last sentence.
Please press the like icon 💚 and follow me for your happy life.