ISO 15031-3:2016 Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use
2 Normative references
SAE J1962:2015, Diagnostic connector
3.1 Terms and definitions
For the purposes of this document, the terms and definitions of SAE J1962 apply.
3.2 Abbreviated terms
ACL additional communication line
CAN Controller Area Network
RHD right-hand-driven
Bibliography
[1] ISO 6722-3:19931, Road vehicles — Unscreened low-tension cables — Part 3: Conductor sizes and dimensions for thick-wall insulated cables
[2] ISO 6722-4:19932, Road vehicles — Unscreened low-tension cables — Part 4: Conductor sizes and dimensions for thin-wall insulated cables
[3] ISO 9141-2, Road vehicles — Diagnostic systems — Part 2: CARB requirements for interchange of digital information
[4] ISO 13400-3, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: IEEE 802.3 based wired vehicle interface
[5] ISO 13400-43, Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 4: Ethernet-based high-speed data link connector
[6] ISO 14230-4, Road vehicles — Diagnostic systems — Keyword Protocol 2000 — Part 4: Requirements for emission-related systems
[7] ISO 15031-1, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information and use case definition
[8] ISO 15031-4, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment
[9] ISO 15765-4, Road vehicles — Diagnostics on Controller Area Network (CAN) — Part 4: Requirements for emissions-related systems
[10] ISO 26021-4, Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 4: Additional communication line with bidirectional communication
[11] ISO 26021-5, Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 5: Additional communication line with pulse width modulated signal
[12] SAE J1850, Class B Data Communications Network Interface
[13] IEEE 802.3, IEEE Standard for Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
参考資料
@kazuo_reve 自動車の故障診断に関連するプログラマーになりたての方が参照するとよさそうな情報
@kazuo_reve AUTOSARのClassic PlatformとAdaptive PlatformにおけるDiagnosticsの違いを整理
自己参照
ISO Road vehicles Diagnostics 規格調査中 100規格、100記事をめざして。
ISO Diagnostics 文献（Normative Reference and Bibliography）集め
ISO Diagnostics 用語定義(Terms and Definition)と短縮名(short name)集め
ISO/IEC OSIに学ぶ
ISO 14229-1:2020 Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer
@kazuo_reveさんの「自動車の故障診断に関連するプログラマーになりたての方が参照するとよさそうな情報」の読み方
@kazuo_reve「AUTOSARのClassic PlatformとAdaptive PlatformにおけるDiagnosticsの違いを整理」で慌てて
＜この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。＞
文書履歴
ver. 0.01 初稿 20220206