はじめに

Databricks Certified Data Engineer Associateの45問の模擬試験 (Practice Exam) がPDF形式で無料で公開されています。実践的な内容で非常に有用なのですが、末尾に正しい回答の一覧があるのみで、各回答の解説はありません。そこで本記事では自身の勉強も兼ねて、回答の解説を試みたいと思います。

Notes

2024年1月15日時点の模擬試験が本記事での対象です
本記事の内容はDatabricks社公式のものではない = 非公式である点に留意ください
誤りなど発見された場合は編集リクエストで教えて頂けると幸いです

Question 1

Which of the following describes a benefit of a data lakehouse that is unavailable in a traditional data warehouse?

A. A data lakehouse provides a relational system of data management.
B. A data lakehouse captures snapshots of data for version control purposes.
C. A data lakehouse couples storage and compute for complete control.
D. A data lakehouse utilizes proprietary storage formats for data.
E. A data lakehouse enables both batch and streaming analytics.

正解
E

データレイクハウスの利点を問う問題。トラディショナルなデータウェアハウス (DWH) では実現できないものを選ぶ必要がある。
A、BはレイクハウスとDWH両方の特徴。
CはDWHの特徴、レイクハウスはストレージとコンピュートが分離 (Decouple) しているのが特徴。
DもDWHの特徴のため誤り。レイクハウスはオープンソースのDelta Lakeがストレージフォーマットの既定。
Eはレイクハウスならではの特徴。トラディショナルなDWHはストリーミング分析のファーストチョイスには通常ならない。よってこれが正解。

Question 2

Which of the following locations hosts the driver and worker nodes of a Databricks-managed cluster?

A. Data plane
B. Control plane
C. Databricks Filesystem
D. JDBC data source
E. Databricks web application

正解
A

Databricksマネージドクラスターのドライバーノードとワーカーノードのホストの所在を問う問題。Aのデータプレーンが正解。

Question 3

A data architect is designing a data model that works for both video-based machine learning workloads and highly audited batch ETL/ELT workloads. Which of the following describes how using a data lakehouse can help the data architect meet the needs of both workloads?

A. A data lakehouse requires very little data modeling.
B. A data lakehouse combines compute and storage for simple governance.
C. A data lakehouse provides autoscaling for compute clusters.
D. A data lakehouse stores unstructured data and is ACID-compliant.
E. A data lakehouse fully exists in the cloud.

正解
D

動画ベースの機械学習のワークロード、監査の厳しいバッチETL/ELTワークロードの両方のニーズに対応するにあたって、データレイクハウスが最も寄与する点は何かを選択肢から選ぶ問題。
Aは問題文の2つのニーズへの対応とは関係ないし、データモデリングがほとんど必要ないかどうかはユースケースによる。
Bの「シンプルなガバナンスのためにコンピュートとストレージを結合」というのはレイクハウスの特徴ではない。
Cは情報としては正しいし、問題文の2つのニーズとも全く関係ないという訳ではないが、Dの方がより適当。
Dの「データレイクハウスは非構造化データの保存に対応」は、問題文の1つ目のニーズ：動画ベースの機械学習のワークロードに適合する。さらに「データレイクハウスはACIDに対応」は、2つ目のニーズ：監査の厳しいバッチETL/ELTワークロードに適合する。よってこれが正解。
Eは情報としては正しいが、回答としてはDの方がより適当。

Question 4

Which of the following describes a scenario in which a data engineer will want to use a Job cluster instead of an all-purpose cluster?

A. An ad-hoc analytics report needs to be developed while minimizing compute costs.
B. A data team needs to collaborate on the development of a machine learning model.
C. An automated workflow needs to be run every 30 minutes.
D. A Databricks SQL query needs to be scheduled for upward reporting.
E. A data engineer needs to manually investigate a production error.

正解
C

汎用クラスターではなくジョブクラスターがマッチするシナリオを選ぶ問題。
A、B、Eは汎用クラスターがマッチするシナリオのため不正解。
Cの30分間隔で実行する必要のある自動化されたワークフローは、ジョブクラスターがマッチする。よってこれが正解。
Dの上層部へのレポーティングのためのDatabricks SQLのクエリのスケジュールは、ジョブクラスターではなくDatabricks SQLで実現した方が良いシナリオのため不正解。

Question 5

A data engineer has created a Delta table as part of a data pipeline. Downstream data analysts now need SELECT permission on the Delta table.

Assuming the data engineer is the Delta table owner, which part of the Databricks Lakehouse Platform can the data engineer use to grant the data analysts the appropriate access?

A. Repos
B. Jobs
C. Data Explorer
D. Databricks Filesystem
E. Dashboards

正解
C

あるDeltaテーブルに権限を付与するために使える機能はどれかを選ぶ問題。Cのデータエクスプローラーが正解。

Question 6

Two junior data engineers are authoring separate parts of a single data pipeline notebook. They are working on separate Git branches so they can pair program on the same notebook simultaneously. A senior data engineer experienced in Databricks suggests there is a better alternative for this type of collaboration.

Which of the following supports the senior data engineer’s claim?

A. Databricks Notebooks support automatic change-tracking and versioning
B. Databricks Notebooks support real-time coauthoring on a single notebook
C. Databricks Notebooks support commenting and notification comments
D. Databricks Notebooks support the use of multiple languages in the same notebook
E. Databricks Notebooks support the creation of interactive data visualizations

正解
B

複数の若手エンジニアが一つのノートブックの異なるセルを、Gitブランチを分ける形で同時編集しているが、Databricksノートブックを使ったもっと良いやり方を選択肢から選ぶ問題。
Aの「自動的な変更管理とバージョニング」は正しい特徴だし、問題文のケースにもある程度有用だが、Bの方がよりベターな選択肢。
Bの「単一のノートブックのリアルタイム共同編集」はそのものズバリの機能、よってこれが正解。
Cの「コメントとコメントの通知」はAと同様。
Dの「同一のノートブックでの複数言語の使用のサポート」は正しい特徴だが、問題文のケースとは直接関係ない。
Eの「インタラクティブなデータ可視化の作成」は正しい特徴だが、問題文のケースとは直接関係ない。

Question 7

Which of the following describes how Databricks Repos can help facilitate CI/CD workflows on the Databricks Lakehouse Platform?

A. Databricks Repos can facilitate the pull request, review, and approval process before
merging branches
B. Databricks Repos can merge changes from a secondary Git branch into a main Git
branch
C. Databricks Repos can be used to design, develop, and trigger Git automation
pipelines
D. Databricks Repos can store the single-source-of-truth Git repository
E. Databricks Repos can commit or push code changes to trigger a CI/CD process

正解
E

Databricks ReposがDatabricksレイクハウスプラットフォームでのCI/CDワークフローの促進にどのように役立つかを問う問題。
Aは合っているとも間違っているとも言えないが、CI/CDワークフローの促進という点では微妙な回答。
B、C、DもAと同様に微妙な回答。
Eの「Databricks Reposはコード変更をコミットまたはプッシュしてCI/CDプロセスをトリガーできる」というのがそのものズバリの回答、よって正解はE。

Question 8

Which of the following statements describes Delta Lake?

A. Delta Lake is an open source analytics engine used for big data workloads.
B. Delta Lake is an open format storage layer that delivers reliability, security, and
performance.
C. Delta Lake is an open source platform to help manage the complete machine
learning lifecycle.
D. Delta Lake is an open source data storage format for distributed data.
E. Delta Lake is an open format storage layer that processes data.

正解
B

Delta Lakeの正しい記述を問う問題。
AはApache Sparkに適した説明であり、Delta Lakeの説明としては不適当。
Bの「Delta Lakeは信頼性、セキュリティ、パフォーマンスを提供するオープンフォーマットのストレージレイヤー」というのは正しい説明、よってこれが正解。
CはMLOpsに適した説明のため不正解。
Dの「分散データのためのオープンソースのデータストレージフォーマット」というのはある種正しいが、Apache Parquetなども該当するため、Bの方がよりベターな回答。
Eの「データを処理するオープンフォーマットのストレージレイヤー」というのは一見正しいが、よく分からない説明。

Question 9

A data architect has determined that a table of the following format is necessary:

id	birthDate	avgRating
a1	1990-01-06	5.5
a2	1974-11-21	7.1
…	…	…

Which of the following code blocks uses SQL DDL commands to create an empty Delta table in the above format regardless of whether a table already exists with this name?

A. 
CREATE OR REPLACE TABLE table_name AS
SELECT
id STRING,
birthDate DATE,
avgRating FLOAT
USING DELTA

B.
CREATE OR REPLACE TABLE table_name (
id STRING,
birthDate DATE,
avgRating FLOAT
)

C.
CREATE TABLE IF NOT EXISTS table_name (
id STRING,
birthDate DATE,
avgRating FLOAT
)

D.
CREATE TABLE table_name AS
SELECT
id STRING,
birthDate DATE,
avgRating FLOAT

E.
CREATE OR REPLACE TABLE table_name WITH COLUMNS (
id STRING,
birthDate DATE,
avgRating FLOAT
) USING DELTA

正解
B

テーブルが既に存在しているかどうかに関係なく、上記の項目を持つ空のDeltaテーブルを作成するSQL DDL文を選ぶ問題。
まずは CREATE OR REPLACE TABLE を使っているA、B、Eが正解の候補になる。
Aは AS SELECT... の結果を元にテーブル作成するいわゆるCTAS文のため、空のテーブルを作成するという条件にマッチしないため不正解。
Eは WITH COLUMNS という構文が不要。

Question 10

Which of the following SQL keywords can be used to append new rows to an existing Delta table?

A. UPDATE
B. COPY
C. INSERT INTO
D. DELETE
E. UNION

正解
C

存在するDeltaテーブルに新しい行を追加するときに使用するSQLキーワードを問う問題。CのINSERT INTOが正解。

Question 11

A data engineering team needs to query a Delta table to extract rows that all meet the same　condition. However, the team has noticed that the query is running slowly. The team has already tuned the size of the data files. Upon investigating, the team has concluded that the rows meeting the condition are sparsely located throughout each of the data files. Based on the scenario, which of the following optimization techniques could speed up the query?

A. Data skipping
B. Z-Ordering
C. Bin-packing
D. Write as a Parquet file
E. Tuning the file size

正解
B

Delta Lakeテーブルから条件に合致する行を抽出するクエリが遅い、データファイルのサイズについては既に最適化済み、条件を満たす行が各データファイル全体にまばらに (Sparsely) 配置されている、といったシチュエーションで使える最適化のテクニックはどれ？という問題。
Aのデータスキッピングは最適化した結果としてもたらされるものであり、最適化のテクニックではないため不正解。
BのZ-Orderingが正解。
CのBin-packingはデータファイルのサイズについては既に最適化済みという記述があることと、Bの方がよりベターな選択肢のため不正解。
DのParquetファイルとして書き出しは不正解。
EのファイルサイズのチューニングについてはCと同様。

Question 12

A data engineer needs to create a database called customer360 at the location　/customer/customer360. The data engineer is unsure if one of their colleagues has already created the database.

Which of the following commands should the data engineer run to complete this task?

A. CREATE DATABASE customer360 LOCATION '/customer/customer360';
B. CREATE DATABASE IF NOT EXISTS customer360;
C. CREATE DATABASE IF NOT EXISTS customer360 LOCATION '/customer/customer360';
D. CREATE DATABASE IF NOT EXISTS customer360 DELTA LOCATION '/customer/customer360';
E. CREATE DATABASE customer360 DELTA LOCATION '/customer/customer360';

正解
C

customer360というテーブルが既にあるかもしれない、場所は/customer/customer360を指定するという要件に対応するクエリを選ぶ問題。CREATE DATABASE IF NOT EXISTSとLOCATIONを含むCが正解。

Question 13

A junior data engineer needs to create a Spark SQL table my_table for which Spark manages both the data and the metadata. The metadata and data should also be stored in
the Databricks Filesystem (DBFS).

Which of the following commands should a senior data engineer share with the junior data engineer to complete this task?

A. CREATE TABLE my_table (id STRING, value STRING) USING org.apache.spark.sql.parquet OPTIONS (PATH "storage-path");
B. CREATE MANAGED TABLE my_table (id STRING, value STRING) USING org.apache.spark.sql.parquet OPTIONS (PATH "storage-path");
C. CREATE MANAGED TABLE my_table (id STRING, value STRING);
D. CREATE TABLE my_table (id STRING, value STRING) USING DBFS;
E. CREATE TABLE my_table (id STRING, value STRING);

正解
E

実データとメタデータ両方を管理するマネージドテーブルを作成するクエリを選ぶ問題。正解はE。USINGやPATHなどのキーワードが付いている他の選択肢は不正解。

Question 14

A data engineer wants to create a relational object by pulling data from two tables. The relational object must be used by other data engineers in other sessions. In order to save on storage costs, the data engineer wants to avoid copying and storing physical data.
Which of the following relational objects should the data engineer create?

A. View
B. Temporary view
C. Delta Table
D. Database
E. Spark SQL Table

正解
A

物理的なデータのコピーを避けて2つのテーブルを入力とするリレーショナルオブジェクトを作りたいというニーズに応える選択肢を選ぶ問題。正解はAのView。

Question 15

A data engineering team has created a series of tables using Parquet data stored in an external system. The team is noticing that after appending new rows to the data in the external system, their queries within Databricks are not returning the new rows. They identify the caching of the previous data as the cause of this issue. Which of the following approaches will ensure that the data returned by queries is always up-to-date?

A. The tables should be converted to the Delta format
B. The tables should be stored in a cloud-based external system
C. The tables should be refreshed in the writing cluster before the next query is run
D. The tables should be altered to include metadata to not cache
E. The tables should be updated before the next query is run

正解
A

Question 16

A table customerLocations exists with the following schema:

id STRING,
date STRING,
city STRING,
country STRING

A senior data engineer wants to create a new table from this table using the following command:

CREATE TABLE customersPerCountry AS
SELECT country,
COUNT(*) AS customers
FROM customerLocations
GROUP BY country;

A junior data engineer asks why the schema is not being declared for the new table. Which of the following responses explains why declaring the schema is not necessary?

A. CREATE TABLE AS SELECT statements adopt schema details from the source table and query.
B. CREATE TABLE AS SELECT statements infer the schema by scanning the data.
C. CREATE TABLE AS SELECT statements result in tables where schemas are optional.
D. CREATE TABLE AS SELECT statements assign all columns the type STRING.
E. CREATE TABLE AS SELECT statements result in tables that do not support schemas

正解
A

CREATE TABLE AS SELECT文でスキーマ宣言が不要な理由について応える問題。正解はA。

Question 17

A data engineer is overwriting data in a table by deleting the table and recreating the table. Another data engineer suggests that this is inefficient and the table should simply be overwritten instead.

Which of the following reasons to overwrite the table instead of deleting and recreating the table is incorrect?

A. Overwriting a table is efficient because no files need to be deleted.
B. Overwriting a table results in a clean table history for logging and audit purposes.
C. Overwriting a table maintains the old version of the table for Time Travel.
D. Overwriting a table is an atomic operation and will not leave the table in an unfinished state.
E. Overwriting a table allows for concurrent queries to be completed while in progress.

正解
B

テーブルのOverwriteの方が望ましいという点で正しくない選択肢を答える問題。
Aの「削除すべきファイルがないためテーブルのOverwriteは効率的である」は正しいため除外。
Bの「テーブルのOverwriteはロギングと監査のためのテーブル履歴を消去してしまう」はテーブルの削除と再作成を行う場合の挙動であり、テーブルのOverwriteではテーブル履歴は保持されるため誤り。よってBが正解。

Question 18

Which of the following commands will return records from an existing Delta table my_table where duplicates have been removed?

A. DROP DUPLICATES FROM my_table;
B. SELECT * FROM my_table WHERE duplicate = False;
C. SELECT DISTINCT * FROM my_table;
D. MERGE INTO my_table a USING new_records b ON a.id = b.id WHEN NOT MATCHED THEN INSERT *;
E. MERGE INTO my_table a USING new_records b;

正解
C

重複排除したレコードを取得するクエリを選ぶ問題。SELECT DISTINCTを含むCが正解。

Question 19

A data engineer wants to horizontally combine two tables as a part of a query. They want to use a shared column as a key column, and they only want the query result to contain rows whose value in the key column is present in both tables.

Which of the following SQL commands can they use to accomplish this task?

A. INNER JOIN
B. OUTER JOIN
C. LEFT JOIN
D. MERGE
E. UNION

正解
A

2つのテーブルに結合キーの値が存在する場合のみ結果セットに残したいというニーズに答えるにはAのINNER JOINを利用する。

Question 20

A junior data engineer has ingested a JSON file into a table raw_table with the following schema:

cart_id STRING,
items ARRAY<item_id:STRING>

The junior data engineer would like to unnest the items column in raw_table to result in a new table with the following schema:

cart_id STRING,
item_id STRING

Which of the following commands should the junior data engineer run to complete this
task?

A. SELECT cart_id, filter(items) AS item_id FROM raw_table;
B. SELECT cart_id, flatten(items) AS item_id FROM raw_table;
C. SELECT cart_id, reduce(items) AS item_id FROM raw_table;
D. SELECT cart_id, explode(items) AS item_id FROM raw_table;
E. SELECT cart_id, slice(items) AS item_id FROM raw_table;

正解
D

配列のフラット化に使えるのはexplode関数、よってDが正解。

Question 21

A data engineer has ingested a JSON file into a table raw_table with the following schema:

transaction_id STRING,
payload ARRAY<customer_id:STRING, date:TIMESTAMP, store_id:STRING>

The data engineer wants to efficiently extract the date of each transaction into a table with the following schema:

transaction_id STRING,
date TIMESTAMP

Which of the following commands should the data engineer run to complete this task?

A. SELECT transaction_id, explode(payload) FROM raw_table;
B. SELECT transaction_id, payload.date FROM raw_table;
C. SELECT transaction_id, date FROM raw_table;
D. SELECT transaction_id, payload[date] FROM raw_table;
E. SELECT transaction_id, date from payload FROM raw_table;

正解
なし

回答リストではBが正解になっているが、エラーになると思われるため、選択肢に正しい正解はないと考える。もしやるなら以下のようなクエリが正解だろうか。

SELECT transaction_id, exploded_payload.date 
FROM raw_table 
LATERAL VIEW explode(payload) AS exploded_payload;

Question 22

A data analyst has provided a data engineering team with the following Spark SQL query:

SELECT district,
       avg(sales)
FROM store_sales_20220101
GROUP BY district;

The data analyst would like the data engineering team to run this query every day. The date at the end of the table name (20220101) should automatically be replaced with the current date each time the query is run.

Which of the following approaches could be used by the data engineering team to efficiently automate this process?

A. They could wrap the query using PySpark and use Python’s string variable system to automatically update the table name.
B. They could manually replace the date within the table name with the current day’s date.
C. They could request that the data analyst rewrites the query to be run less frequently.
D. They could replace the string-formatted date in the table with a timestamp-formatted date.
E. They could pass the table into PySpark and develop a robustly tested module on the existing query

正解
A

テーブル名の年月日を毎日変更したいというニーズに答えるには、PythonのString変数の関数を使うことで対応できる、よってAが正解。ただ、Eのテーブル名をパラメーターとしてパスするというのも正解だと考える。

Question 23

A data engineer has ingested data from an external source into a PySpark DataFrame raw_df. They need to briefly make this data available in SQL for a data analyst to perform a quality assurance check on the data.

Which of the following commands should the data engineer run to make this data available in SQL for only the remainder of the Spark session?

A. raw_df.createOrReplaceTempView("raw_df")
B. raw_df.createTable("raw_df")
C. raw_df.write.save("raw_df")
D. raw_df.saveAsTable("raw_df")
E. There is no way to share data between PySpark and SQL.

正解
A

Sparkセッションの生存期間中のみSQLでクエリできればよいので、createOrReplaceTempViewを使うAが正解。

Question 24

A data engineer needs to dynamically create a table name string using three Python variables: region, store, and year. An example of a table name is below when region = "nyc", store = "100", and year = "2021":

nyc100_sales_2021

Which of the following commands should the data engineer use to construct the table name in Python?

A. "{region}+{store}+sales+{year}"
B. f"{region}+{store}+sales+{year}"
C. "{region}{store}sales{year}"
D. f"{region}{store}sales{year}"
E. {region}+{store}+"sales"+{year}

正解
D

Pythonのf文字列の知識問題。正解はD。

Question 25

A data engineer has developed a code block to perform a streaming read on a data source. The code block is below:

(spark
    .read
    .schema(schema)
    .format("cloudFiles")
    .option("cloudFiles.format", "json")
    .load(dataSource)
)

The code block is returning an error.

Which of the following changes should be made to the code block to configure the block to successfully perform a streaming read?

A. The .read line should be replaced with .readStream.
B. A new .stream line should be added after the .read line.
C. The .format("cloudFiles") line should be replaced with .format("stream").
D. A new .stream line should be added after the spark line.
E. A new .stream line should be added after the .load(dataSource) line.

正解
A

Question 26

A data engineer has configured a Structured Streaming job to read from a table, manipulate the data, and then perform a streaming write into a new table.

The code block used by the data engineer is below:

(spark.table("sales")
    .withColumn("avg_price", col("sales") / col("units"))
    .writeStream
    .option("checkpointLocation", checkpointPath)
    .outputMode("complete")
    ._____
    .table("new_sales")
)

If the data engineer only wants the query to execute a single micro-batch to process all of the available data, which of the following lines of code should the data engineer use to fill in the blank?

A. trigger(once=True)
B. trigger(continuous="once")
C. processingTime("once")
D. trigger(processingTime="once")
E. processingTime(1)

正解
A

Question 27

A data engineer is designing a data pipeline. The source system generates files in a shared directory that is also used by other processes. As a result, the files should be kept as is and will accumulate in the directory. The data engineer needs to identify which files are new since the previous run in the pipeline, and set up the pipeline to only ingest those new files with each run.

Which of the following tools can the data engineer use to solve this problem?

A. Databricks SQL
B. Delta Lake
C. Unity Catalog
D. Data Explorer
E. Auto Loader

正解
E

Question 28

A data engineering team is in the process of converting their existing data pipeline to utilize Auto Loader for incremental processing in the ingestion of JSON files. One data engineer comes across the following code block in the Auto Loader documentation:

(streaming_df = spark.readStream.format("cloudFiles")
    .option("cloudFiles.format", "json")
    .option("cloudFiles.schemaLocation", schemaLocation)
    .load(sourcePath))

Assuming that schemaLocation and sourcePath have been set correctly, which of the following changes does the data engineer need to make to convert this code block to use Auto Loader to ingest the data?

A. The data engineer needs to change the format("cloudFiles") line to format("autoLoader").
B. There is no change required. Databricks automatically uses Auto Loader for streaming reads.
C. There is no change required. The inclusion of format("cloudFiles") enables the use of Auto Loader.
D. The data engineer needs to add the .autoLoader line before the .load(sourcePath) line.
E. There is no change required. The data engineer needs to ask their administrator to turn on Auto Loader.

正解
C

Question 29

Which of the following data workloads will utilize a Bronze table as its source?

A. A job that aggregates cleaned data to create standard summary statistics
B. A job that queries aggregated data to publish key insights into a dashboard
C. A job that ingests raw data from a streaming source into the Lakehouse
D. A job that develops a feature set for a machine learning application
E. A job that enriches data by parsing its timestamps into a human-readable format

正解
E

Bronzeテーブルをソースとして扱うデータワークロードを選ぶ問題。つまりBronzeテーブルをクレンジングあるいはエンリッチしてSilverテーブルを作成するジョブを選べばOK。Eのタイムスタンプを人間が読みやすいフォーマットにパースすることでデータをエンリッチするジョブが正解。

Question 30

Which of the following data workloads will utilize a Silver table as its source?

A. A job that enriches data by parsing its timestamps into a human-readable format
B. A job that queries aggregated data that already feeds into a dashboard
C. A job that ingests raw data from a streaming source into the Lakehouse
D. A job that aggregates cleaned data to create standard summary statistics
E. A job that cleans data by removing malformatted records

正解
D

SilverテーブルをソースとしてGoldテーブルを作成するようなジョブを選べばOK。Dのクレンジング済みのデータから標準的な要約統計を作成するジョブが正解。

Question 31

Which of the following Structured Streaming queries is performing a hop from a Bronze table to a Silver table?

A.
(spark.table("sales")
    .groupBy("store")
    .agg(sum("sales"))
    .writeStream
    .option("checkpointLocation", checkpointPath)
    .outputMode("complete")
    .table("aggregatedSales")
)

B.
(spark.table("sales")
    .agg(sum("sales"),
         sum("units"))
    .writeStream
    .option("checkpointLocation", checkpointPath)
    .outputMode("complete")
    .table("aggregatedSales")
)

C.
(spark.table("sales")
    .withColumn("avgPrice", col("sales") / col("units"))
    .writeStream
    .option("checkpointLocation", checkpointPath)
    .outputMode("append")
    .table("cleanedSales")
)

D.
(spark.readStream.load(rawSalesLocation)
    .writeStream
    .option("checkpointLocation", checkpointPath)
    .outputMode("append")
    .table("uncleanedSales")
)

E.
(spark.read.load(rawSalesLocation)
    .writeStream
    .option("checkpointLocation", checkpointPath)
    .outputMode("append")
    .table("uncleanedSales")
)

正解
C

BronzeテーブルからSilverテーブルへデータを出力する構造化ストリーミングのコードブロックを選ぶ問題。Silverテーブルと思しきcleanedSalesテーブルにwriteStreamでストリーミングでAppendしているCが正解。

Question 32

Which of the following benefits does Delta Live Tables provide for ELT pipelines over
standard data pipelines that utilize Spark and Delta Lake on Databricks?

A. The ability to declare and maintain data table dependencies
B. The ability to write pipelines in Python and/or SQL
C. The ability to access previous versions of data tables
D. The ability to automatically scale compute resources
E. The ability to perform batch and streaming queries

正解
A

Databricks上でSparkとDelta Lakeを使う通常のデータパイプラインと比較してDelta Live Tables (DLT) が優れている点を選ぶ問題。Aのデータテーブルの依存性の宣言と管理というのはDLTならではの特徴。他はDLTと通常のデータパイプラインの両方に共通する特徴。よって正解はA。

Question 33

A data engineer has three notebooks in an ELT pipeline. The notebooks need to be executed in a specific order for the pipeline to complete successfully. The data engineer would like to use Delta Live Tables to manage this process.

Which of the following steps must the data engineer take as part of implementing this pipeline using Delta Live Tables?

A. They need to create a Delta Live Tables pipeline from the Data page.
B. They need to create a Delta Live Tables pipeline from the Jobs page.
C. They need to create a Delta Live tables pipeline from the Compute page.
D. They need to refactor their notebook to use Python and the dlt library.
E. They need to refactor their notebook to use SQL and CREATE LIVE TABLE keyword.

正解
B

DLTを用いたデータパイプラインを実装する上で必須のステップを選ぶ問題。

Question 34

A data engineer has written the following query:

SELECT *
FROM json.`/path/to/json/file.json`;

The data engineer asks a colleague for help to convert this query for use in a Delta Live Tables (DLT) pipeline. The query should create the first table in the DLT pipeline.
Which of the following describes the change the colleague needs to make to the query?

A. They need to add a COMMENT line at the beginning of the query.
B. They need to add a CREATE LIVE TABLE table_name AS line at the beginning of the query.
C. They need to add a live. prefix prior to json. in the FROM line.
D. They need to add a CREATE DELTA LIVE TABLE table_name AS line at the beginning of the query.
E. They need to add the cloud_files(...) wrapper to the JSON file path.

正解
B

DLT用にSQLクエリを書き換える問題。CREATE LIVE TABLEキーワードを使うBが正解。

Question 35

A dataset has been defined using Delta Live Tables and includes an expectations clause:

CONSTRAINT valid_timestamp EXPECT (timestamp > '2020-01-01')

What is the expected behavior when a batch of data containing data that violates these constraints is processed?

A. Records that violate the expectation are added to the target dataset and recorded as invalid in the event log.
B. Records that violate the expectation are dropped from the target dataset and recorded as invalid in the event log.
C. Records that violate the expectation cause the job to fail.
D. Records that violate the expectation are added to the target dataset and flagged as invalid in a field added to the target dataset.
E. Records that violate the expectation are dropped from the target dataset and loaded into a quarantine table.

正解
模擬試験ではAが回答になっているがBが正解と思われる。

CONTRAINTキーワードで指定したルールに準拠しないレコードの扱いを問う問題。ターゲットデータセットには出力されず、イベントログにInvalidとして記録されるBが正解。

Question 36

A Delta Live Table pipeline includes two datasets defined using STREAMING LIVE TABLE. Three datasets are defined against Delta Lake table sources using LIVE TABLE.

The table is configured to run in Development mode using the Triggered Pipeline Mode.

Assuming previously unprocessed data exists and all definitions are valid, what is the expected outcome after clicking Start to update the pipeline?

A. All datasets will be updated once and the pipeline will shut down. The compute resources will be terminated.
B. All datasets will be updated at set intervals until the pipeline is shut down. The compute resources will be deployed for the update and terminated when the pipeline is stopped.
C. All datasets will be updated at set intervals until the pipeline is shut down. The compute resources will persist after the pipeline is stopped to allow for additional testing.
D. All datasets will be updated once and the pipeline will shut down. The compute resources will persist to allow for additional testing.
E. All datasets will be updated continuously and the pipeline will not shut down. The compute resources will persist with the pipeline.

正解
D

DevelopmentモードかつTriggered PipelineモードでDLTパイプラインを実行した場合の挙動を選ぶ問題。すべてのデータセットが更新され、コンピュートリソースが追加のテストを受け入れるために残存するDが正解。

Question 37

A data engineer has a Job with multiple tasks that runs nightly. One of the tasks unexpectedly fails during 10 percent of the runs.

Which of the following actions can the data engineer perform to ensure the Job completes each night while minimizing compute costs?

A. They can institute a retry policy for the entire Job
B. They can observe the task as it runs to try and determine why it is failing
C. They can set up the Job to run multiple times ensuring that at least one will complete
D. They can institute a retry policy for the task that periodically fails
E. They can utilize a Jobs cluster for each of the tasks in the Job

正解
D

夜間ジョブのタスクの一つが全実行の10%、予期せずに失敗するという状況。コンピュートコストを最小化しつつ夜間ジョブを完了させるのに最も適切な選択肢を選ぶ問題。Periodically failesというのが気になるが、ジョブ全体ではなく対象のタスクにリトライポリシーを設定する方がコンピュートコストの最小化には繋がるため、AよりもDが正解になっていると思われる。

Question 38

A data engineer has set up two Jobs that each run nightly. The first Job starts at 12:00 AM, and it usually completes in about 20 minutes. The second Job depends on the first Job, and it starts at 12:30 AM. Sometimes, the second Job fails when the first Job does not complete by 12:30 AM.

Which of the following approaches can the data engineer use to avoid this problem?

A. They can utilize multiple tasks in a single job with a linear dependency
B. They can use cluster pools to help the Jobs run more efficiently
C. They can set up a retry policy on the first Job to help it run more quickly
D. They can limit the size of the output in the second Job so that it will not fail as easily
E. They can set up the data to stream from the first Job to the second Job

正解
A

セカンドジョブがファーストジョブに依存しているにもかかわらず、両方をスケジュール実行しており、ファーストジョブが12:30AMまでに終わらないためセカンドジョブが失敗するケースがある。これに対処するにはAの一つのジョブに二つのタスクを直列で設定するというのがベストな選択肢。

Question 39

A data engineer has set up a notebook to automatically process using a Job. The data engineer’s manager wants to version control the schedule due to its complexity.

Which of the following approaches can the data engineer use to obtain a version-controllable configuration of the Job’s schedule?

A. They can link the Job to notebooks that are a part of a Databricks Repo.
B. They can submit the Job once on a Job cluster.
C. They can download the JSON description of the Job from the Job’s page.
D. They can submit the Job once on an all-purpose cluster.
E. They can download the XML description of the Job from the Job’s page.

正解
C

ジョブのスケジュールのバージョン管理を行いたいというニーズに応える選択肢を選ぶ問題。Cが正解になっているが、ジョブの定義をJobs APIやTerraformでIaC的に管理する方が現時点ではベター。

Question 40

A data analyst has noticed that their Databricks SQL queries are running too slowly. They claim that this issue is affecting all of their sequentially run queries. They ask the data engineering team for help. The data engineering team notices that each of the queries uses the same SQL endpoint, but the SQL endpoint is not used by any other user.

Which of the following approaches can the data engineering team use to improve the latency of the data analyst’s queries?

A. They can turn on the Serverless feature for the SQL endpoint.
B. They can increase the maximum bound of the SQL endpoint’s scaling range.
C. They can increase the cluster size of the SQL endpoint.
D. They can turn on the Auto Stop feature for the SQL endpoint.
E. They can turn on the Serverless feature for the SQL endpoint and change the Spot Instance Policy to “Reliability Optimized.”

正解
C

Databricks SQLのクエリのレイテンシーの改善を行うのに最も適した選択肢を選ぶ問題。アナリストチームは一つのSQLエンドポイント（現在ではSQLウェアハウスに改称）を使っており、他のユーザーはそのエンドポイントを利用していないという前提。クラスターの同時実行性能というよりも処理能力が足りていないと考えられるため、Cのクラスターサイズの増強が回答になる。サーバーレスによって初回クエリのレイテンシーは短くなるが、問題文にそのような記述がないためひっかけの選択肢。

Question 41

An engineering manager uses a Databricks SQL query to monitor their team’s progress on fixes related to customer-reported bugs. The manager checks the results of the query every day, but they are manually rerunning the query each day and waiting for the results.

Which of the following approaches can the manager use to ensure the results of the query are updated each day?

A. They can schedule the query to run every 1 day from the Jobs UI.
B. They can schedule the query to refresh every 1 day from the query’s page in Databricks SQL.
C. They can schedule the query to run every 12 hours from the Jobs UI.
D. They can schedule the query to refresh every 1 day from the SQL endpoint’s page in Databricks SQL.
E. They can schedule the query to refresh every 12 hours from the SQL endpoint’s page in Databricks SQL.

正解
B

日次で実行するDatabricks SQLクエリの自動化の最適な方法を問う問題。正解はB。

Question 42

A data engineering team has been using a Databricks SQL query to monitor the performance of an ELT job. The ELT job is triggered by a specific number of input records being ready to process. The Databricks SQL query returns the number of minutes since the job’s most recent runtime.

Which of the following approaches can enable the data engineering team to be notified if the ELT job has not been run in an hour?

A. They can set up an Alert for the accompanying dashboard to notify them if the returned value is greater than 60.
B. They can set up an Alert for the query to notify when the ELT job fails.
C. They can set up an Alert for the accompanying dashboard to notify when it has not refreshed in 60 minutes.
D. They can set up an Alert for the query to notify them if the returned value is greater than 60.
E. This type of alerting is not possible in Databricks.

正解
D

最新のジョブの実行時間（分）を返却するDatabrick SQLクエリがあるとして、ジョブが一時間以内に終わっていない場合に通知する方法を問う問題。クエリの結果が60を超える場合にアラートを通知するDが正解。

Question 43

A data engineering manager has noticed that each of the queries in a Databricks SQL dashboard takes a few minutes to update when they manually click the “Refresh” button. They are curious why this might be occurring, so a team member provides a variety of reasons on why the delay might be occurring.

Which of the following reasons fails to explain why the dashboard might be taking a few minutes to update?

A. The SQL endpoint being used by each of the queries might need a few minutes to start up.
B. The queries attached to the dashboard might take a few minutes to run under normal circumstances.
C. The queries attached to the dashboard might first be checking to determine if new data is available.
D. The Job associated with updating the dashboard might be using a non-pooled endpoint.
E. The queries attached to the dashboard might all be connected to their own, unstarted Databricks clusters.

正解
D

ダッシュボードのリフレッシュに時間がかかる理由の説明として誤っているものを選ぶ問題。DだけがジョブやNon-pooledエンドポイントなどのDatabricks SQLと関係ない記述をしており、Dが正解。

Question 44

A new data engineer has started at a company. The data engineer has recently been added to the company’s Databricks workspace as new.engineer@company.com. The data engineer needs to be able to query the table sales in the database retail. The new data engineer already has been granted USAGE on the database retail.

Which of the following commands can be used to grant the appropriate permissions to the new data engineer?

A. GRANT USAGE ON TABLE sales TO new.engineer@company.com;
B. GRANT CREATE ON TABLE sales TO new.engineer@company.com;
C. GRANT SELECT ON TABLE sales TO new.engineer@company.com;
D. GRANT USAGE ON TABLE new.engineer@company.com TO sales;
E. GRANT SELECT ON TABLE new.engineer@company.com TO sales;

正解
C

salesテーブルをクエリするのに必要な権限を付与するコマンドを選ぶ問題。GRANT USAGEはカタログやスキーマに対して使用するものでありテーブルに使用するものではないため誤り。正解はSELECT権限を付与しているC。

Question 45

A new data engineer new.engineer@company.com has been assigned to an ELT project. The new data engineer will need full privileges on the table sales to fully manage the project.

Which of the following commands can be used to grant full permissions on the table to the new data engineer?

A. GRANT ALL PRIVILEGES ON TABLE sales TO new.engineer@company.com;
B. GRANT USAGE ON TABLE sales TO new.engineer@company.com;
C. GRANT ALL PRIVILEGES ON TABLE new.engineer@company.com TO sales;
D. GRANT SELECT ON TABLE sales TO new.engineer@company.com;
E. GRANT SELECT CREATE MODIFY ON TABLE sales TO new.engineer@company.com;

正解
A

対象テーブルのフル権限を付与するSQLを選ぶ問題。正解はA。