LoginSignup
1
2

More than 3 years have passed since last update.

@kaz19610303(上野 和昭)

SIM7000JCでもTinyGSMのHttpClientを動かしてみた

Posted at

前回SIMCOM社のSIM7500JCでTinyGSMのHttpClientを動かしましたが
今回は同じくSIMCOM社のLTE cat.M1 のモジュールSIM7000JCでTinyGSMのHttpClientを動かしました。
SIM7500JCで動かしたページはこちら

機器構成

名称 型名 メーカー
マイコンボード Arduino UNO Arduino
SIM7000JC拡張ボード NS-SIM7000-0101 Next Step
SIMカード Plan-D SORACOM

通信用拡張ボードが SIM7500JC から SIM7000JC に変わっています。

プログラムは SIM7500JC のときのプログラムをベースに 通信モジュールの設定箇所だけを変更します。
その他の設定・変更は SIM7500JC のときと同じになりますのでそちらを参照して下さい。

// Select your modem:
// #define TINY_GSM_MODEM_SIM800
// #define TINY_GSM_MODEM_SIM808
// #define TINY_GSM_MODEM_SIM868
// #define TINY_GSM_MODEM_SIM900
#define TINY_GSM_MODEM_SIM7000
// #define TINY_GSM_MODEM_SIM5360
// #define TINY_GSM_MODEM_SIM7600
// #define TINY_GSM_MODEM_UBLOX
// #define TINY_GSM_MODEM_SARAR4
// #define TINY_GSM_MODEM_M95
// #define TINY_GSM_MODEM_BG96
// #define TINY_GSM_MODEM_A6
// #define TINY_GSM_MODEM_A7
// #define TINY_GSM_MODEM_M590
// #define TINY_GSM_MODEM_MC60
// #define TINY_GSM_MODEM_MC60E
// #define TINY_GSM_MODEM_ESP8266
// #define TINY_GSM_MODEM_XBEE
// #define TINY_GSM_MODEM_SEQUANS_MONARCH

プログラムを実行すると Arduino IDE の シリアルモニタに次のように表示されます。

Wait...
Waiting for network...[7579] ### Unhandled: +CEREG: 0,1

OK
 success
[8644] ### Unhandled: +CEREG: 0,1

OK
Network connected
Connecting to soracom.io success
GPRS connected
Performing HTTP GET request... Response status code: 200
Response Headers:
    Server : nginx/1.10.3 (Ubuntu)
    Date : Fri, 01 Jan 2021 07:26:29 GMT
    Content-Type : text/plain; charset=UTF-8
    Content-Length : 121
    Connection : close
    X-DNS-Prefetch-Control : off
    X-Frame-Options : SAMEORIGIN
    Strict-Transport-Security : max-age=15552000; includeSubDomains
    X-Download-Options : noopen
    X-Content-Type-Options : nosniff
    X-XSS-Protection : 1; mode=block
    Accept-Ranges : bytes
    Cache-Control : public, max-age=0
    Last-Modified : Wed, 27 Sep 2017 09:03:12 GMT
    ETag : W/"79-15ec2936080"
Content length is: 121
Response:

  _____            _____  _____  _____
    |  | |\ | \_/ |  ___ |_____ |  |  |
    |  | | \|  |  |_____| _____||  |  |


Body length is: 121
Server disconnected
GPRS disconnected

プログラム全体はこのようになります。

HttpClient.ino
/**************************************************************
 *
 * This sketch connects to a website and downloads a page.
 * It can be used to perform HTTP/RESTful API calls.
 *
 * For this example, you need to install ArduinoHttpClient library:
 *   https://github.com/arduino-libraries/ArduinoHttpClient
 *   or from http://librarymanager/all#ArduinoHttpClient
 *
 * TinyGSM Getting Started guide:
 *   https://tiny.cc/tinygsm-readme
 *
 * For more HTTP API examples, see ArduinoHttpClient library
 *
 * NOTE: This example may NOT work with the XBee because the
 * HttpClient library does not empty to serial buffer fast enough
 * and the buffer overflow causes the HttpClient library to stall.
 * Boards with faster processors may work, 8MHz boards will not.
 **************************************************************/

// Select your modem:
// #define TINY_GSM_MODEM_SIM800
// #define TINY_GSM_MODEM_SIM808
// #define TINY_GSM_MODEM_SIM868
// #define TINY_GSM_MODEM_SIM900
#define TINY_GSM_MODEM_SIM7000
// #define TINY_GSM_MODEM_SIM5360
// #define TINY_GSM_MODEM_SIM7600
// #define TINY_GSM_MODEM_UBLOX
// #define TINY_GSM_MODEM_SARAR4
// #define TINY_GSM_MODEM_M95
// #define TINY_GSM_MODEM_BG96
// #define TINY_GSM_MODEM_A6
// #define TINY_GSM_MODEM_A7
// #define TINY_GSM_MODEM_M590
// #define TINY_GSM_MODEM_MC60
// #define TINY_GSM_MODEM_MC60E
// #define TINY_GSM_MODEM_ESP8266
// #define TINY_GSM_MODEM_XBEE
// #define TINY_GSM_MODEM_SEQUANS_MONARCH

// Set serial for debug console (to the Serial Monitor, default speed 115200)
#define SerialMon Serial

// Set serial for AT commands (to the module)
// Use Hardware Serial on Mega, Leonardo, Micro
// #define SerialAT Serial1

// or Software Serial on Uno, Nano
#include <SoftwareSerial.h>
SoftwareSerial SerialAT(8, 7); // RX, TX

// Increase RX buffer to capture the entire response
// Chips without internal buffering (A6/A7, ESP8266, M590)
// need enough space in the buffer for the entire response
// else data will be lost (and the http library will fail).
#if !defined(TINY_GSM_RX_BUFFER)
#define TINY_GSM_RX_BUFFER 650
#endif

// See all AT commands, if wanted
// #define DUMP_AT_COMMANDS

// Define the serial console for debug prints, if needed
#define TINY_GSM_DEBUG SerialMon
// #define LOGGING  // <- Logging is for the HTTP library

// Range to attempt to autobaud
#define GSM_AUTOBAUD_MIN 9600
#define GSM_AUTOBAUD_MAX 115200

// Add a reception delay - may be needed for a fast processor at a slow baud rate
// #define TINY_GSM_YIELD() { delay(2); }

// Define how you're planning to connect to the internet
#define TINY_GSM_USE_GPRS true
#define TINY_GSM_USE_WIFI false

// set GSM PIN, if any
#define GSM_PIN ""

// Your GPRS credentials, if any
const char apn[]  = "soracom.io";
const char gprsUser[] = "sora";
const char gprsPass[] = "sora";

// Your WiFi connection credentials, if applicable
const char wifiSSID[]  = "YourSSID";
const char wifiPass[]  = "YourWiFiPass";

// Server details
const char server[] = "vsh.pp.ua";
const char resource[] = "/TinyGSM/logo.txt";
const int  port = 80;

#include <TinyGsmClient.h>
#include <ArduinoHttpClient.h>

// Just in case someone defined the wrong thing..
#if TINY_GSM_USE_GPRS && not defined TINY_GSM_MODEM_HAS_GPRS
#undef TINY_GSM_USE_GPRS
#undef TINY_GSM_USE_WIFI
#define TINY_GSM_USE_GPRS false
#define TINY_GSM_USE_WIFI true
#endif
#if TINY_GSM_USE_WIFI && not defined TINY_GSM_MODEM_HAS_WIFI
#undef TINY_GSM_USE_GPRS
#undef TINY_GSM_USE_WIFI
#define TINY_GSM_USE_GPRS true
#define TINY_GSM_USE_WIFI false
#endif

#ifdef DUMP_AT_COMMANDS
  #include <StreamDebugger.h>
  StreamDebugger debugger(SerialAT, SerialMon);
  TinyGsm modem(debugger);
#else
  TinyGsm modem(SerialAT);
#endif

TinyGsmClient client(modem);
HttpClient http(client, server, port);

void setup() {
  // Set console baud rate
  SerialMon.begin(115200);
  delay(10);

  // !!!!!!!!!!!
  // Set your reset, enable, power pins here
  pinMode(12, OUTPUT);
  digitalWrite(12, HIGH);
  delay(500);
  digitalWrite(12, LOW);
  // !!!!!!!!!!!

  SerialMon.println("Wait...");

  // Set GSM module baud rate
  // TinyGsmAutoBaud(SerialAT, GSM_AUTOBAUD_MIN, GSM_AUTOBAUD_MAX);
  SerialAT.begin(4800);
  delay(6000);

  // Restart takes quite some time
  // To skip it, call init() instead of restart()
  // SerialMon.println("Initializing modem...");
  // modem.restart();
  // modem.init();

  //  String modemInfo = modem.getModemInfo();
  //  SerialMon.print("Modem Info: ");
  //  SerialMon.println(modemInfo);

#if TINY_GSM_USE_GPRS
  // Unlock your SIM card with a PIN if needed
  if ( GSM_PIN && modem.getSimStatus() != 3 ) {
    modem.simUnlock(GSM_PIN);
  }
#endif
}

void loop() {

#if TINY_GSM_USE_WIFI
  // Wifi connection parameters must be set before waiting for the network
  SerialMon.print(F("Setting SSID/password..."));
  if (!modem.networkConnect(wifiSSID, wifiPass)) {
    SerialMon.println(" fail");
    delay(10000);
    return;
  }
  SerialMon.println(" success");
#endif

#if TINY_GSM_USE_GPRS && defined TINY_GSM_MODEM_XBEE
  // The XBee must run the gprsConnect function BEFORE waiting for network!
  modem.gprsConnect(apn, gprsUser, gprsPass);
#endif

  SerialMon.print("Waiting for network...");
  if (!modem.waitForNetwork()) {
    SerialMon.println(" fail");
    delay(10000);
    return;
  }
  SerialMon.println(" success");

  if (modem.isNetworkConnected()) {
    SerialMon.println("Network connected");
  }

#if TINY_GSM_USE_GPRS
  // GPRS connection parameters are usually set after network registration
    SerialMon.print(F("Connecting to "));
    SerialMon.print(apn);
    if (!modem.gprsConnect(apn, gprsUser, gprsPass)) {
      SerialMon.println(" fail");
      delay(10000);
      return;
    }
    SerialMon.println(" success");

    if (modem.isGprsConnected()) {
      SerialMon.println("GPRS connected");
    }
#endif

  SerialMon.print(F("Performing HTTP GET request... "));
  int err = http.get(resource);
  if (err != 0) {
    SerialMon.println(F("failed to connect"));
    delay(10000);
    return;
  }

  int status = http.responseStatusCode();
  SerialMon.print(F("Response status code: "));
  SerialMon.println(status);
  if (!status) {
    delay(10000);
    return;
  }

  SerialMon.println(F("Response Headers:"));
  while (http.headerAvailable()) {
    String headerName = http.readHeaderName();
    String headerValue = http.readHeaderValue();
    SerialMon.println("    " + headerName + " : " + headerValue);
  }

  int length = http.contentLength();
  if (length >= 0) {
    SerialMon.print(F("Content length is: "));
    SerialMon.println(length);
  }
  if (http.isResponseChunked()) {
    SerialMon.println(F("The response is chunked"));
  }

  String body = http.responseBody();
  SerialMon.println(F("Response:"));
  SerialMon.println(body);

  SerialMon.print(F("Body length is: "));
  SerialMon.println(body.length());

  // Shutdown

  http.stop();
  SerialMon.println(F("Server disconnected"));

#if TINY_GSM_USE_WIFI
    modem.networkDisconnect();
    SerialMon.println(F("WiFi disconnected"));
#endif
#if TINY_GSM_USE_GPRS
    modem.gprsDisconnect();
    SerialMon.println(F("GPRS disconnected"));
#endif

  // Do nothing forevermore
  while (true) {
    delay(1000);
  }
}

確認はしていませんが SIM7000JC でもサンプルプログラムの「AllFunctions」、「WebClient」も動くと思います。

1
2
0

Register as a new user and use Qiita more conveniently

  1. You get articles that match your needs
  2. You can efficiently read back useful information
  3. You can use dark theme
What you can do with signing up
Sign upLogin
1
2