More than 1 year has passed since last update.

Specification of Communication, AUTOSAR R22-11, CP, No.15(2)

Last updated at 2023-05-03Posted at 2023-01-05

Specification of Communication, AUTOSAR R22-11, CP, No.15

AUTOSARが、2022年の版、R22-11公開しました。公開行事の模様は

AUTOSAR R22-11 Release Event 20221208

下記は想定URLです。順次確認中です。

間違っていたら、いいね　を押していただいて、コメント欄にご報告くださると幸いです。
編集リクエストが、構造的な変更をしている最中に、構造的な編集リクエストをしていただくと、
何をどう直したらいいかわからなくなってしまいます。自動修復ツールがつくれていません。ごめんなさい。

文書は検索してダウンロードすることができます。
クラウドサービスにありがちな、あるのにないかのような検索結果が出ることがあります。

AUTOSAR R22-11 Classic Platform 一覧はこちら。

Classic Platform Release Overview, AUTOSAR R22-11, CP, No.0(2)

AUTOSAR R22-11 マラソン

Qiitaの記事の一覧は作成中です。

AUTOSAR R22-11 一覧（２）

OSEK COM およびAUTOSAR COM

OSEK/VDX Communication Version 3.0.3

INTERACTION LAYERという名前は OSEK/VDX COMから来ている。

OSEK Table 2-1: Message filter algorithms

Algorithm Reference	Algorithm	Description
F_Always	True	No filtering is performed so that the message always passes
F_Never	False	The filter removes all messages
F_MaskedNewEqualsX	(new_value&mask) == x	Pass messages whose masked value is equal to a specific value
F_MaskedNewDiffersX	(new_value&mask) != x	Pass messages whose masked value is not equal to a specific value
F_NewIsEqual	new_value == old_value	Pass messages which have not changed
F_NewIsDifferent	new_value != old_value	Pass messages which have changed
F_MaskedNewEqualsMaskedOld	(new_value&mask) == (old_value&mask)	Pass messages where the masked value has not changed
F_ MaskedNewDiffersMaskedOld	(new_value&mask) != (old_value&mask)	Pass messages where the masked value has changed
F_NewIsWithin	min <= new_value <= max	Pass a message if its value is within a predefined boundary
F_NewIsOutside	(min > new_value) OR (new_value > max)	Pass a message if its value is outside a predefined boundary
F_NewIsGreater	new_value > old_value	Pass a message if its value has increased
F_NewIsLessOrEqual	new_value <= old_value	Pass a message if its value has not increased
F_NewIsLess	new_value < old_value	Pass a message if its value has decreased
F_NewIsGreaterOrEqual	new_value >= old_value	Pass a message if its value has not decreased
F_OneEveryN	occurrence % period == offset	Pass a message once every N message occurrences.Start: occurrence = 0.Each time the message is received or transmitted, occurrence is incremented by 1 after filtering.Length of occurrence is 8 bit (minimum).

ISO OSEK/VDX と AUTOSARの大きな違いを４つあげれば、

AUTOSAR はOSを拡張している。
COMとNMが違う。　
RTEを定義している。
OIL(OSEK Implementation Language)ではなくARXMLで幅広い設定ができる。

Function	ISO OSEK/VDX	AUTOSAR
Filter	定義	参照
VFB	COM	RTE

COMの違いは、RTEを定義していることにもよる。

それ以外にも、AUTOSARにはISO OSEK/VDXにない機能がいろいろあるが、　
OS、COM、NMが関係しているのは

Abstract Platform との関係　

ISO 各種規格に基づいた診断、通信の抽象的な定義をする。

必要があれば国際規格を改定する。

<この項は書きかけです。順次追記します。>

文書変更(Document Change)

Removed I-PDU counter and I-PDU replication
Added support for independent de- velopment of CP Software Clusters
minor corrections / clarifications / editorial changes

用語(terms)

Term	Description
AUTOSAR COM	The AUTOSAR COM module is derived from [17]. For details, see Chapter 7.2.1.
DM	Deadline Monitoring, for details see Chapter 7.3.6
I-PDU	Interaction Layer Protocol Data Unit. An I-PDU carries signals. It is defined in [17].
L-PDU	Data Link Layer Protocol Data Unit. In AUTOSAR, the Data Link Layer is equivalent to the Communication Hardware Abstraction and Microcontroller Abstraction Layer.
MDT	A detailed description of the Minimum Delay Timer (MDT) can be found in [17]. See also Chapter 7.3.5.5.
PDU Router	The PDU Router is a module transferring I-PDUs from one module to another module. The PDU Router can be utilized for gateway operations and for internal routing purposes.
SDU	Service Data Unit For a description see [1] Chapter 4.
TM	Transmission Mode
TMC	Transmission Mode Condition, see Chapter 7.3.3.2
TMS	Transmission Mode Selector, see Chapter 7.3.3.2
Confirmation	With a Confirmation, the PDU Router reports that a request by the AUTOSAR COM module has been completed successfully. It is a reaction to a request of COM. E.g. when a PDU has been successfully transmitted.
Data Invalid Value	Value sent by the AUTOSAR COM module to indicate that the sender side AUTOSAR Software Component is not able to provide a valid value.
Dynamic Length Signal	A dynamic length signal is a signal which length can vary at run-time.
Dynamic Length I-PDU	A dynamic length I-PDU is an I-PDU containing a dynamic length signal. It length varies depending on the length of the included dynamic length signal.
Group signal	A group signal is a signal that is contained in a signal group.
Indication	An Indication is asynchronous information from PDU Router to COM, e.g. to acknowledge that something has been received.
Init Value	I-PDUs and signals are set to the Init Value by the AUTOSAR COM module after start-up. This value is used until it is overwritten.
I-PDU group	An I-PDU Group is an arbitrary collection of I-PDUs of the same direction (i.e. send or receive) in the COM module.
Inter-ECU – communication	Communication between two or more ECUs for example via a CAN network Intra-ECU – communication
Large Signal	A large signal is a signal that is too large to fit into a single L-PDU of the underlying communication protocol.
Large I-PDU	Large I-PDUs are I-Signal-I-PDUs which do not fit into a single L-PDU of the underlying communication protocol. Large I-PDUs will be handled like other I-PDUs by COM, but are transmitted/received via the TP API. Please note that large I-PDUs can also be handled in a more efficient way by LargeDataCOM if they contain just one signal, or if the signals can be (de- )serialized by the RTE. But if the signals have to be treated separately or have to be routed, the large I-PDUs have to be handled by COM.
Message	[17] uses always the synonym message. In AUTOSAR, message is replaced by signal but with the same meaning.
Metadata	For some I-PDUs, e.g. J1939 I-PDUs, the payload is extended with additional metadata containing for example the CAN-ID. Notification Information by the AUTOSAR COM module to its users (e.g. RTE, SwCluC), e.g. when new data is available, an error occurred.
Signal	A signal in the AUTOSAR COM module’s context is equal to a message in [17]; see also [7].
Signal group	In AUTOSAR, so called complex data types are used. Inside a complex data type, there are one or more data elements (primitive data types), like in a C struct. The data consistency of such complex data types must be ensured. The user (e.g. RTE or SwCluC) decomposes the complex data type in single signals and sends them to the AUTOSAR COM module. As these signals altogether need to be treated consistently, they are called signal group. See also [7].
Update-bit	A mechanism supported by the AUTOSAR COM module with that the receiver of a signal/ signal group could identify whether the sender has updated the data in this signal/ signal group before sending. See Chapter 7.9.

英日単語帳

日本語は仮訳

T.B.D.

参考(reference)

[1] AUTOSAR Layered Architecture
AUTOSAR_EXP_LayeredSoftwareArchitecture.pdf
[2] Specification of Communication Stack Types
AUTOSAR_SWS_CommunicationStackTypes.pdf
[3] General Requirements on Basic Software Modules
AUTOSAR_SRS_BSWGeneral.pdf
[4] Basic Software UML Model
AUTOSAR_MOD_BSWUMLModel.eap
[5] Specification of Standard Types
AUTOSAR_SWS_StandardTypes.pdf
[6] Specification of the Virtual Functional Bus
AUTOSAR_EXP_VFB.pdf
[7] Requirements on Communication
AUTOSAR_SRS_COM.pdf
[8] Software Component Template
AUTOSAR_TPS_SoftwareComponentTemplate.pdf
[9] Requirements on Gateway
AUTOSAR_SRS_Gateway.pdf
[10] Specification of PDU Router
AUTOSAR_SWS_PDURouter.pdf
[11] Specification of Operating System
AUTOSAR_SWS_OS.pdf
[12] System Template
AUTOSAR_TPS_SystemTemplate.pdf
[13] Specification of RTE Software
AUTOSAR_SWS_RTE.pdf
[14] Specification of ECU Configuration
AUTOSAR_TPS_ECUConfiguration.pdf
[15] Specification of Communication Manager
AUTOSAR_SWS_COMManager.pdf
[16] AUTOSAR Basic Software Module Description Template
AUTOSAR_TPS_BSWModuleDescriptionTemplate.pdf
[19] Specification of CAN Transport Layer
AUTOSAR_SWS_CANTransportLayer.pdf
[20] Specification of FlexRay Transport Layer
AUTOSAR_SWS_FlexRayTransportLayer.pdf
[21] List of Basic Software Modules,
AUTOSAR_TR_BSWModuleList.pdf
[22] Generic Structure Template
AUTOSAR_TPS_GenericStructureTemplate.pdf
[23] General Specification of Basic Software Modules
AUTOSAR_SWS_BSWGeneral.pdf
[24] Specification of Software Cluster Connection
AUTOSAR_SWS_SoftwareClusterConnection.pdf
[17] ISO 17356-4:2005 Road vehicles -- Open interface for embedded automotive
applications -- Part 4: OSEK/VDX Communication (COM)
[18] ISO 17356-6:2006 Road vehicles -- Open interface for embedded automotive
applications -- Part 6: OSEK/VDX Implementation Language (OIL)

Glossary も　参考に入れましょう。
https://www.autosar.org/fileadmin/standards/foundation/22-11/AUTOSAR_TR_Glossary.pdf

文書履歴(document history)

ver. 0.01 初稿 20230105
ver. 0.02 ありがとう追記 20230503

最後までおよみいただきありがとうございました。

いいね　💚、フォローをお願いします。

Thank you very much for reading to the last sentence.

Please press the like icon 💚　and follow me for your happy life.

You get articles that match your needs
You can efficiently read back useful information
You can use dark theme

What you can do with signing up