Specification of Diagnostic Communication Manager, AUTOSAR R22-11, CP, No.18

AUTOSARが、2022年の版、R22-11公開しました。公開行事の模様は

AUTOSAR R22-11 Release Event 20221208

下記は想定URLです。順次確認中です。

間違っていたら、いいね　を押していただいて、コメント欄にご報告くださると幸いです。
編集リクエストが、構造的な変更をしている最中に、構造的な編集リクエストをしていただくと、
何をどう直したらいいかわからなくなってしまいます。自動修復ツールがつくれていません。ごめんなさい。

文書は検索してダウンロードすることができます。
クラウドサービスにありがちな、あるのにないかのような検索結果が出ることがあります。

AUTOSAR R22-11 Classic Platform 一覧はこちら。

Classic Platform Release Overview, AUTOSAR R22-11, CP, No.0(2)

AUTOSAR R22-11 マラソン

Qiitaの記事の一覧は作成中です。

AUTOSAR R22-11 一覧（２）

Abstract Platformとの関係

ISO 各種規格に基づいた診断、通信の抽象的な定義をする。
必要があれば国際規格を改定する。

<この項は書きかけです。順次追記します。>

文書変更(Document Change)

•Diagnostic Extract shall be completed to describe multi-dimensional arrays and arrays with complex data types
• Update RoE to match latest ISO 14229-1
• Handling of Dem_GetNumberOfFreezeFrameRecords
• minor corrections / clarifications / editorial changes; For details please refer to the ChangeDocumentation

用語(terms)

Term	Description
AddressAndLengthFormat Identifier	Defines the number of bytes used for the memoryAddress and memorySize parameter in the request messages.
Application Layer	The Application Layer is placed above the RTE. Within the Application Layer the AUTOSAR Software-Components are placed.
Atomic Sender/Receiver interface	An atomic sender-receiver interface can be used to group DID data elements into one record data element prototype. All data elements can be read or write having a single read or write operation.
Channel	A link at which a data transfer can take place. If there is more than one Channel, there is normally some kind of ID assigned to the Channel.
Concurrent TesterPresent	A UDS service TesterPresent with set suppressPosRspMsgIndicationBit (3E 80) which is received with functional addressing. It is also known as keep-alive logic..
Diagnostic Channel	A link at which a data transfer between a diagnostic tool and an ECU can take place. Example: An ECU is connected via CAN and the diagnostic channel has an assigned CAN-ID. Diagnostic channels connected to other bus-systems such as MOST, FlexRay, LIN, etc. are also possible.
External Diagnostic Tool	A device which is NOT permanently connected to the vehicle communication network. This External Diagnostic Tool can be connected to the vehicle for various purposes, as e.g. for: • development • manufacturing • service (in a garage) Example External Diagnostic Tools are: • a diagnostic tester • an OBD scan tool The External Diagnostic Tool is to be connected by a mechanic to gather information from ”inside” the car.
Freeze Frame	A set of the vehicle/system operation conditions at a specific time.
Functional Addressing	The diagnostic communication model where a group or all nodes of a specific communication network receive a message from one sending node (1-n communication). This model is also referred to as ’broadcast’ or ’multicast’. OBD communication will always be done in the Functional Addressing mode.
Internal Diagnostic Tool	A device/ECU which is connected to the vehicle communication network. The Internal Diagnostic Tool can be used for: • advanced event tracking • advanced analysis • for service The behavior of the Internal Diagnostic Tool can be the same as of an External Diagnostic Tool. The notion of ”Internal Diagnostic Tool” does not imply that it is included in each ECU as an AUTOSAR Software-Component.
Physical Addressing	The diagnostic communication model where a node of a specific communication network receives a message from one sending node (1-1 communication). This model is also referred to as ’unicast’.
UDS Service	this refers to a UDS Service as defined in ISO14229-1 [1].
OBD Scan tool	See definition External Diagnostic Tool.
OBD Service	This refers to an OBD Service as defined in ISO15031-5 [2].
OBD UDS DTC separation	The feature will report a different 3 byte DTC number for SAE J1979-2 based UDS communication than for none J1979-2 UDS communication.
periodic transmission rate	Time interval value that defines the time between two calls of a periodic data identifier transmission. The value is configuration specific and there are separate values for fast, medium and slow periodic data transmission. The configured value is always an integer multiple of the Dcm main task time.
API	Application Programming Interface
CAN	Controller Area Network
CEMR	ControlEnableMaskRecord
Dcm	Diagnostic Communication Manager
Dem	Diagnostic Event Manager
Det	Default Error Tracer
DID	Data Identifier
DSD	Diagnostic Service Dispatcher (submodule of the Dcm module)
DSL	Diagnostic Session Layer (submodule of the Dcm module)
DSP	Diagnostic Service Processing (submodule of the Dcm module)
DTC	Diagnostic Trouble Codes
ID	Identifier
LIN	Local Interconnect Network
MCU	Micro-Controller Unit
MOST	Media Orientated System Transport
NRC	Negative Response Code
OBD	On-Board Diagnosis
OSI	Open Systems Interconnection
PDID	Periodic Data Identifier, periodically send by the Dcm after a request of ReadDataByPeriodicIndentifer
PDU	Protocol Data Unit
PID	Parameter Identifier
RCRRP	Response correctly received - response pending
RID	Routine Identifier
ROE	ResponseOnEvent
RTE	Runtime Environment
SAP	Service Access Point
SDU	Service Data Unit
SID	Service Identifier
SW-C	Software-Component
TP	Transport Protocol
UDS	Unified Diagnostic Services
Xxx_	Placeholder for an API provider
SPRMIB	suppressPosRspMsgIndicationBit

英日

日本語は仮訳

T.B.D.

参考(reference)

[1] Unified diagnostic services (UDS) – Part 1: Specification and requirements (Release 2013-03) http://www.iso.org
[2] Road vehicles – Communication between vehicle and external equipment for emission-related diagnostic – Part 5: Emission-related diagnostic services. http://www.iso.org
[3] SAE J1979
[4] Diagnostics on controller area network (CAN) – Part 3: Implementation of unified
diagnostic services (UDS on CAN) (Release 2004 10-06)
[5] Diagnostics on controller area network (CAN) – Part 4: Requirements for emission-related systems (Release 2005 01-04)
[6] Glossary, AUTOSAR_TR_Glossary
https://www.autosar.org/fileadmin/standards/foundation/22-11/AUTOSAR_TR_Glossary.pdf
[7] General Specification of Basic Software Modules AUTOSAR_SWS_BSWGeneral
[8] Unified diagnostic services (UDS) – Part 1: Application layer (Release 2020-02) http://www.iso.org
[9] General Requirements on Basic Software Modules
AUTOSAR_SRS_BSWGeneral
[10] ISO 17356-3: Road vehicles – Open interface for embedded automotive applications – Part 3: OSEK/VDX Operating System (OS)
[11] Unified diagnostic services (UDS) - Part 2: Session layer services (Release 2013-03)
http://www.iso.org
[12] Specification of PDU Router, AUTOSAR_SWS_PDURouter
[13] Road vehicles – Diagnostics on Controller Area Networks (CAN) – Part2: Network layer services
[14] Specification of Diagnostic Event Manager
AUTOSAR_SWS_DiagnosticEventManager
[15] Road vehicles – Communication between vehicle and external equipment for emission-related diagnostic – Part 6: Diagnostic trouble code definitions http://www.iso.org
[16] Specification of NVRAM Manager
AUTOSAR_SWS_NVRAMManager
[17] Specification of Crypto Service Manager
AUTOSAR_SWS_CryptoServiceManager
[18] Specification of Key Manager
AUTOSAR_SWS_KeyManager
[19] Specification of I/O Hardware Abstraction
AUTOSAR_SWS_IOHardwareAbstraction

関連文書(Related document)

2023年1月　記事数一覧

年末100記事を30点に仕上げる。

2023 書き初め

「はじめてのCAN/CANFD 」ベクタージャパン＜エンジニア夏休み企画>【読書感想文】

三方良し　Udemy 車載LAN入門講座 CAN通信編

詳解車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(1) 著者　＜エンジニア夏休み企画読書感想文＞

詳解車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(2)参考文献＜エンジニア夏休み企画>【読書感想文】

詳解車載ネットワーク CAN、CAN FD、LIN、CXPI、Ethernetの仕組みと設計のために

最新URL変更記事

Specification of Diagnostic Communication Manager, AUTOSAR 18, R22-11, CP 20230421

＜この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。＞

文書履歴(document history)

ver. 0.01 初稿　20230106
ver. 0.02 ありがとう追記 20230503

最後までおよみいただきありがとうございました。

いいね　💚、フォローをお願いします。

Thank you very much for reading to the last sentence.

Please press the like icon 💚　and follow me for your happy life.