IEC 60204-32:2023 CMV Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
https://webstore.iec.ch/en/publication/86793
2 Normative references
IEC 60034-1:2017, Rotating electrical machines – Part 1: Rating and performance
IEC 60034-5, Rotating electrical machines – Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) – Classification
IEC 60034-11, Rotating electrical machines – Part 11: Thermal protection
IEC 60068-2-27:19872008, Basic Environmental testing procedures – Part 2-27: Tests – Test Ea and guidance: Shock
IEC 60068-2-31:2008, Environmental testing – Part 2-31: Tests – Test Ec: Rough handling shocks, primarily for equipment-type specimens
IEC 60068-2-32:1975, Basic environmental testing procedures – Part 2-32: Tests – Test Ed:Free fall Amendment 2 (1990)
IEC 60072-1, Rotating electrical machines – Dimensions and output series – Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
IEC 60072-2, Dimensions and output series for rotating electrical machines – Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
IEC 60072-3, Dimensions and output series for rotating electrical machines – Part 3: Small built-in motors – Flange numbers BF10 to BF50
IEC 60073:2002, Basic and safety principles for man-machine interface, marking and identification – Coding principles for indicators and actuators
IEC 60309-1, Plugs, fixed or portable socket-outlets and couplers appliance inlets for industrial purposes – Part 1: General requirements
IEC 60332 (all parts), Tests on electric and optical fibre cables under fire conditions
IEC 60364-1:2005, Low-voltage electrical installations – Part 1: Fundamental principles, assessment of general characteristics, definitions
IEC 60364-4-41:2005, Low-voltage electrical installations – Part 4-41: Protection for safety – Protection against electric shock
IEC 60364-4-41:2005/AMD1:2017
IEC 60364-4-42:2001, Electrical installations of buildings – Part 4-42: Protection for safety – Protection against thermal effects
IEC 60364-4-43:20012008, Low-voltage electrical installations of buildings – Part 4-43: Protection for safety – Protection against overcurrent
IEC 60364-5-52:20012009, Low-voltage electrical installations of buildings – Part 5-52: Selection and erection of electrical equipment – Wiring systems
IEC 60364-5-53:20022019, Low-voltage electrical installations of buildings – Part 5-53: Selection and erection of electrical equipment – Devices for protection for safety, isolation, switching, control and monitoring
IEC 60364-5-54:20022011, Low-voltage electrical installations of buildings –Part 5-54: Selection and erection of electrical equipment – Earthing arrangements, protective conductors and protective bonding conductors
IEC 60364-6:20062016, Low-voltage electrical installations – Part 6: Verification
IEC 60417, Graphical symbols for use on equipment (available at https://www.graphical- symbols.info/equipment)
IEC 60439-1:1999, Low-voltage switchgear and controlgear assemblies – Part 1: Type-tested and partially type-tested assemblies1 Amendment 1 (2004)
IEC 60445:2021, Basic and safety principles for man-machine interface, marking and identification – Identification of equipment terminals, conductor terminations and conductors
IEC 60446:1999, Basic and safety principles for man-machine interface, marking and identification – Identification of conductors by colours or alphanumerics
IEC 60447:2004, Basic and safety principles for man-machine interface, marking and identification – Actuating principles
IEC 60529:2001, Degrees of protection provided by enclosures (IP Code)
IEC 60617, Graphical symbols for diagrams
IEC 60664-1:2007, Insulation coordination for equipment within low-voltage supply systems – Part 1: Principles, requirements and tests
IEC 60755:2017, General safety requirements for residual current operated protective devices
IEC 60898 (all parts), Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations
IEC 60947-1:2007, Low-voltage switchgear and controlgear – Part 1: General rules
IEC 60947-2:20062016, Low-voltage switchgear and controlgear – Part 2: Circuit-breakers
IEC 60947-3, Low-voltage switchgear and controlgear – Part 3: Switches, disconnectors, switch-disconnectors, and fuse-combination units
IEC 60947-4-1:20002018, Low-voltage switchgear and controlgear – Part 4-1: Contactors and motor‑starters – Electromechanical contactors and motor-starters Amendment 1 (2002)1
IEC 60947-5-1:20032016, Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices
IEC 60947-5-5, Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function
IEC 60947-6-2, Low-voltage switchgear and controlgear – Part 6-2: Multiple function equipment – Control and protective switching devices (or equipment) (CPS)
IEC 61082-1:2006, Preparation of documents used in electrotechnology – Part 1: Rules
IEC 61140, Protection against electric shock – Common aspects for installations and equipment
IEC 61180-2:1994, High-voltage techniques for low-voltage equipment – Part 2: Test equipment
IEC 61204-7, Low-voltage switch mode power supplies – Part 7: Safety requirements
IEC 61310 (all parts), Safety of machinery – Indication, marking and actuation
IEC 61346 (all parts), Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations
IEC 61439-1, Low-voltage switchgear and controlgear assemblies – Part 1: General rules
IEC 61557-3, Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures – Part 3: Loop impedance
IEC 61557-9:2014, Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures – Part 9: Equipment for insulation fault detection in IT systems
IEC 61558-1, Safety of power transformers, power supplies, reactors and similar products transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests
IEC 61558-2-2, Safety of power transformers, power supplies, reactors and combinations thereof – Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers
IEC 61558-2-6, Safety of power transformers, power supply units and similar transformers, reactors, power supply units and combinations thereof – Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for general use applications
IEC 61558-2-16, Safety of transformers, reactors, power supply units and combinations
thereof – Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications
IEC 61800-3, Adjustable speed electrical power drive systems – Part 3: EMC requirements and specific test methods for PDS and machine tools
IEC 61800-5-1, Adjustable speed electrical power drive systems – Part 5-1: Safety requirements – Electrical, thermal and energy
IEC 61800-5-2:2007, Adjustable speed electrical power drive systems – Part 5-2: Safety requirements – Functional
IEC 61984, Connectors – Safety requirements and tests
IEC 62023, Structuring of technical information and documentation
IEC 62027, Preparation of parts lists
IEC 62061, Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC 62079, Preparation of instructions – Structuring, content and presentation
IEC 62745:2017, Safety of machinery – Requirements for cableless control systems of machinery
ISO 7000:2004, Graphical symbols for use on equipment – Index and synopsis
ISO 7010, Graphical symbols – Safety colours and safety signs – Registered safety signs, available at https://www.iso.org/obp
ISO 12100:2010, Safety of machinery – General principles for design – Risk assessment and risk reduction
ISO 12100-1:Safety of machinery – Part 1: Basic terminology, methodology
ISO 12100-2:2003, Safety of machinery – Basic concepts, General principles for design – Part 2: Technical principles
ISO 13849-1:2006, Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design
ISO 13849-2:2003, Safety of machinery – Safety-related parts of control systems – Part 2: Validation
ISO 13850:20062015, Safety of machinery – Emergency stop function – Principles for design
ISO 13851:2002, Safety of machinery – Two-hand control devices – Functional aspects and design principles
ISO 13852:1996, Safety of machinery – Safety distances to prevent danger zones being reached by the upper limbs
ISO 13857, Safety of machinery –Safety distances to prevent hazard zones being reached by upper and lower limbs
Rlated article on Qiita
IEC standard
https://qiita.com/kaizen_nagoya/items/639741a3a21847092c95
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
https://qiita.com/kaizen_nagoya/items/8782c2b85d52aa98a6d9
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements NR & B.
https://qiita.com/kaizen_nagoya/items/cb5e98ade542493b6375
IEC 60034-1, Rotating electrical machines – Part 1: Rating and performance
https://qiita.com/kaizen_nagoya/items/8fb06b1116f1782e8c91
IEC 60034-5:2020 RLV Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
https://qiita.com/kaizen_nagoya/items/b0de3ae7772d0c23d66e
IEC standard voltages
https://qiita.com/kaizen_nagoya/items/1e15e378732a1d970c2c
IEC 60050，International Electrotechnical Vocabulary
https://qiita.com/kaizen_nagoya/items/587cfc2bf96242c31427
IEC 60072 Rotating electrical machines - Dimensions and output series
https://qiita.com/kaizen_nagoya/items/9c0bd9b2befd55c23ae7
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
https://qiita.com/kaizen_nagoya/items/118af2027128b4634598
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
https://qiita.com/kaizen_nagoya/items/dc960f813b85c2899076
IEC 60204-11:2018 RLV Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV
https://qiita.com/kaizen_nagoya/items/bb1036951a97f0e02617
IEC 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
https://qiita.com/kaizen_nagoya/items/9ddccc6302ff5f0081ca
IEC 60204-32:2023 CMV Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines