IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
https://webstore.iec.ch/en/publication/26037
JIS B 9960-1：2019 機械類の安全性−機械の電気装置− 第1部：一般要求事項
https://kikakurui.com/b9/B9960-1-2019-01.html
Normative Reference
C:Class, O:original, N:normative reference|Bibliography
| C | JIS | ISO/IEC |
|---|---|---|
| IEC 60034-1, Rotating electrical machines – Part 1: Rating and performance | ||
| IEC 60072 (all parts), Dimensions and output series for rotating electrical machines | ||
| IEC 60309-1, Plugs, socket-outlets, and couplers for industrial purposes – Part 1: General requirements | ||
| IEC 60364-1, Low-voltage electrical installations – Part 1: Fundamental principles, assessment of general characteristics, definitions | ||
| IEC 60364-4-41:2005, Low-voltage electrical installations – Part 4-41: Protection for safety – Protection against electric shock | ||
| IEC 60364-4-43:2008, Low-voltage electrical installations – Part 4-43: Protection for safety – Protection against overcurrent | ||
| IEC 60364-5-52:2009, Low-voltage electrical installations – Part 5-52: Selection and erection of electrical equipment – Wiring systems | ||
| IEC 60364-5-53:2001, Electrical installations of buildings – Part 5-53: Selection and erection of electrical equipment – Isolation, switching and control | ||
| IEC 60364-5-53:2001/AMD1:2002 | ||
| IEC 60364-5-54:2011, Low-voltage electrical installations – Part 5-54: Selection and erection of electrical equipment – Earthing arrangements and protective conductors | ||
| IEC 60417, Graphical symbols for use on equipment. Available from: http://www.graphical-symbols.info/equipment | ||
| IEC 60445:2010, Basic and safety principles for man-machine interface, marking and identification – Identification of equipment terminals, conductor terminations and conductors | ||
| IEC 60529, Degrees of protection provided by enclosures (IP Code) | ||
| IEC 60664-1, Insulation coordination for equipment within low-voltage systems – Part 1: Principles, requirements and tests | ||
| IEC 60947-2, Low-voltage switchgear and controlgear – Part 2: Circuit-breakers | ||
| IEC 60947-3, Low-voltage switchgear and controlgear – Part 3: Switches, disconnectors, switch-disconnectors, and fuse-combination units | ||
| IEC 60947-5-1:2003, Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices | ||
| IEC 60947-5-1:2003/AMD1:2009 | ||
| IEC 60204-1:2016 © IEC 2016 This is a preview - click here to buy the full publication | ||
| IEC 60947-5-5, Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function | ||
| IEC 60947-6-2, Low-voltage switchgear and controlgear – Part 6-2: Multiple function equipment – Control and protective switching devices(or equipment) (CPS) | ||
| IEC 61140, Protection against electric shock – Common aspects for installation and equipment | ||
| IEC 61310 (all parts), Safety of machinery – Indication, marking and actuation | ||
| IEC 61439-1, Low-voltage switchgear and controlgear assemblies – Part 1: General rules | ||
| IEC 61558-1:2005, Safety of power transformers, power supplies, reactors and similar products – Part 1: General requirements and tests | ||
| IEC 61558-1:2005/AMD1:2009 | ||
| IEC 61558-2-6, Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers | ||
| IEC 61984, Connectors – Safety requirements and tests | ||
| IEC 62023, Structuring of technical information and documentation | ||
| IEC 62061, Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems | ||
| ISO 7010:2011, Graphical symbols – Safety colours and safety signs – Registered safety signs | ||
| ISO 13849-1, Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design | ||
| ISO 13849-2, Safety of machinery – Safety-related parts of control systems – Part 2: Validation | ||
| ISO 13850:2006, Safety of machinery – Emergency stop function – Principles for design | ||
| JIS B 9703:2011 機械類の安全性−非常停止−設計原則 | ：ISO 13850:2006，Safety of machinery−Emergency stop function−Principles for design（IDT） | |
| JIS B 9705-1 機械類の安全性−制御システムの安全関連部−第1部：設計のための一般原則 | 格：ISO 13849-1，Safety of machinery−Safety-related parts of control systems−Part 1: General principles for design | |
| JIS B 9705-2 機械類の安全性−制御システムの安全関連部−第2部：妥当性確認 | ：ISO 13849-2，Safety of machinery−Safety-related parts of control systems−Part 2: Validation | |
| JIS B 9706（規格群） 機械類の安全性−表示，マーキング及び操作 | ：IEC 61310 (all parts)，Safety of machinery−Indication, marking and actuation （IDT） | |
| JIS B 9961 機械類の安全性−安全関連の電気・電子・プログラマブル電子制御システムの機能安全 | ：IEC 62061，Safety of machinery−Functional safety of safety-related electrical, electronic and programmable electronic control systems（IDT） | |
| JIS C 0920 電気機械器具の外郭による保護等級（IPコード） | ：IEC 60529，Degrees of protection provided by enclosures (IP Code)（IDT） | |
| JIS C 8201-5-8 低圧開閉装置及び制御装置−第5-8部：制御回路機器及び開閉素子−3ポジションイネーブルスイッチ | ：IEC 60947-5-8，Low-voltage switchgear and controlgear−Part 5-8: Control circuit devices and switching elements−Three-position enabling switches（IDT） | |
| JIS C 8269-1 低電圧ヒューズ−第1部：通則 | ：IEC 60269-1:2006，Low-voltage fuses−Part 1: General requirements（IDT） | |
| JIS C 60364（規格群） 低圧電気設備 | ：IEC 60364 (all parts)，Low-voltage electrical installations（IDT） | |
| JIS C 61000-6-1:2008 電磁両立性−第6-1部：共通規格−住宅，商業及び軽工業環境におけるイミュニティ | ：IEC 61000-6-1:2005，Electromagnetic compatibility (EMC)−Part 6-1: Generic standards−Immunity for residential, commercial and light-industrial environments（IDT） | |
| JIS C 61000-6-2:2008 電磁両立性−第6-2部：共通規格−工業環境におけるイミュニティ | ：IEC 61000-6-2:2005，Electromagnetic compatibility (EMC)−Part 6-2: Generic standards−Immunity for industrial environments（IDT） | |
| JIS C 61558-2-2 変圧器，電源装置，リアクトル及びこれに類する装置の安全性−第2-2部：制御変圧器及び制御変圧器を組み込んだ電源装置の個別要求事項及び試験 | ：IEC 61558-2-2，Safety of power transformers, power supplies, reactors and similar products−Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers（MOD） | |
| JIS C 61558-2-16 入力電圧1 100V以下の変圧器，リアクトル，電源装置及びこれに類する装置の安全性−第2-16部：スイッチモード電源装置及びスイッチモード電源装置用変圧器の個別要求事項及び試験 | ：IEC 61558-2-16，Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V−Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units（MOD） | |
| JIS Z 9290-1:2014 雷保護−第1部：一般原則 | ：IEC 62305-1:2010，Protection against lightning−Part 1: General principles（IDT） | |
| JIS Z 9290-4:2016 雷保護−第4部：建築物等内の電気及び電子システム | ：IEC 62305-4:2010，Protection against lightning−Part 4: Electrical and electronic systems within structures（IDT） | |
| IEC 60034-5，Rotating electrical machines−Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code)−Classification IEC 60034-11，Rotating electrical machines−Part 11: Thermal protection | ||
| IEC 60038:2009，IEC standard voltages IEC 60050，International Electrotechnical Vocabulary（＜http://www.electropedia.org＞にある。） | ||
| IEC 60073:2002，Basic and safety principles for man-machine interface, marking and identification−Coding principles for indicators and actuators | ||
| IEC 60216 (all parts)，Electrical insulating materials−Thermal endurance properties | ||
| IEC 60287 (all parts)，Electric cables−Calculation of the current rating | ||
| IEC 60320-1，Appliance couplers for household and similar general purposes−Part 1: General requirements | ||
| IEC 60335 (all parts)，Household and similar electrical appliances−Safety | ||
| IEC 60447:2004，Basic and safety principles for man-machine interface, marking and identification−Actuating principles | ||
| IEC TR 60755，General requirements for residual current operated protective devices | ||
| IEC 60757:1983，Code for designation of colours IEC 60884-1，Plugs and socket-outlets for household and similar purposes−Part1: General requirements | ||
| IEC TR 60890，A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation | ||
| IEC 60909-0:2001，Short-circuit currents in three-phase a.c. systems−Part 0: Calculation of currents | ||
| IEC TR 60909-1:2002，Short-circuit currents in three-phase a.c. systems−Part 1: Factors for the calculation of short-circuit currents according to | ||
| IEC 60909-0 IEC 60947-1:2007，Low-voltage switchgear and controlgear−Part 1: General rules IEC 60947-7-1:2009，Low-voltage switchgear and controlgear−Part 7-1: Ancillary equipment−Terminal blocks for copper conductors | ||
| IEC 61000-5-2:1997，Electromagnetic compatibility (EMC)−Part 5: Installation and mitigation guidelines−Section 2: Earthing and cabling | ||
| IEC 61000-6-3:2006，Electromagnetic compatibility (EMC)−Part 6-3: Generic standards−Emission standard for residential, commercial and light-industrial environments | ||
| IEC 61000-6-4:1997，Electromagnetic compatibility (EMC)−Part 6: Generic standards−Section 4: Emission standard for industrial environments | ||
| IEC 61082-1:2014，Preparation of documents used in electrotechnology−Part 1: Rules | ||
| IEC 61084 (all parts)，Cable trunking and ducting systems for electrical installations | ||
| IEC 61175，Industrial systems, installations and equipment and industrial products−Designation of signals | ||
| IEC 61180 (all parts)，High-voltage test techniques for low-voltage equipment | ||
| IEC TR 61200-53:1994，Electrical installation guide−Part 53: Selection and erection of electrical equipment−Switchgear and controlgear | ||
| IEC 61204-7，Low-voltage switch mode power supplies−Part 7: Safety requirements | ||
| IEC 61496-1:2004，Safety of machinery−Electro-sensitive protective equipment−Part 1: General requirements and tests IEC 61506，Industrial-process measurement and control−Documentation of application software | ||
| IEC 61557 (all parts)，Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.−Equipment for testing, measuring or monitoring of protective measures | ||
| IEC 61784-3，Industrial communication networks−Profiles−Part 3: Functional safety fieldbuses−General rules and profile definitions | ||
| IEC 61800 (all parts)，Adjustable speed electrical power drive systems IEC TR 61912-1:2007，Low-voltage switchgear and controlgear−Overcurrent protective devices−Part 1: Application of short-circuit ratings | ||
| IEC 62020，Electrical accessories−Residual current monitors for household and similar uses (RCMs) | ||
| IEC 62027:2011，Preparation of object lists, including parts lists | ||
| IEC 62491，Industrial systems, installations and equipment and industrial products−Labelling of cables and cores | ||
| IEC 62507-1，Identification systems enabling unambiguous information interchange−Requirements−Part 1: Principles and methods | ||
| IEC PAS 62569-1，Generic specification of information on products−Part 1: Principles and methods | ||
| IEC 81346-1:2009，Industrial systems, installations and equipment and industrial products−Structuring principles and reference designations−Part 1: Basic rules | ||
| IEC 81346-2:2009，Industrial systems, installations and equipment and industrial products−Structuring principles and reference designations−Part 2: Classification of objects and codes for classes | ||
| IEC 82079-1:2012，Preparation of instructions for use−Structuring, content and presentation−Part 1: General principles and detailed requirements | ||
| IEC Guide 106:1996，Guide for specifying environmental conditions for equipment performance rating | ||
| ISO 3864-1:2011，Graphical symbols−Safety colours and safety signs−Part 1: Design principles for safety signs and safety markings | ||
| ISO 7000:2014，Graphical symbols for use on equipment−Registered symbols | ||
| ISO 13732-1，Ergonomics of the thermal environment−Methods for the assessment of |
Bibliograpgy
| C | JIS | ISO/IEC |
|---|---|---|
| JIS B 9700:2013 機械類の安全性−設計のための一般原則−リスクアセスメント及びリスク低減 | ISO 12100:2010，Safety of machinery−General principles for design−Risk assessment and risk reduction（IDT） | |
| JIS B 9710 機械類の安全性−ガードと共同するインターロック装置−設計及び選択のための原則 | ISO 14119，Safety of machinery−Interlocking devices associated with guards−Principles for design and selection（IDT） | |
| JIS B 9712:2006 機械類の安全性−両手操作制御装置−機能的側面及び設計原則 | ISO 13851:2002，Safety of machinery−Two-hand control devices−Functional aspects and design principles（IDT） JIS B 9713-1:2004 機械類の安全性−機械類への常設接近手段−第1部：高低差のある2か所間の固定された昇降設備の選択 | |
| JIS B 9713-2:2004 機械類の安全性−機械類への常設接近手段−第2部：作業用プラットフォーム及び通路 | ISO 14122-2:2001，Safety of machinery−Permanent means of access to machinery−Part 2: Working platforms and walkways（IDT） | |
| JIS B 9713-3:2004 機械類の安全性−機械類への常設接近手段−第3部：階段，段ばしご及び防護さく（柵） | ISO 14122-3:2001，Safety of machinery−Permanent means of access to machinery−Part 3: Stairs, stepladders and guard-rails（IDT） | |
| JIS B 9714:2006 機械類の安全性−予期しない起動の防止 | ISO 14118:2000，Safety of machinery−Prevention of unexpected start-up（IDT） | |
| JIS B 9960-11:2004 機械類の安全性−機械の電気装置−第11部：交流1 000 V又は直流1 500 Vを超え36 kV以下の高電圧装置に対する要求事項 注記 | IEC 60204-11:2000，Safety of machinery−Electrical equipment of machines−Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV（MOD） | |
| JIS B 9960-31:2017 機械類の安全性−機械の電気装置−第31部：縫製機械，縫製ユニット及び縫製システムの安全性並びにEMCに対する個別要求事項 | IEC 60204-31:2013，Safety of machinery−Electrical equipment of machines−Part 31: Particular safety and EMC requirements for sewing machines, units and systems（MOD） | |
| JIS B 9960-32:2011 機械類の安全性−機械の電気装置−第32部：巻上機械に対する要求事項 | IEC 60204-32:2008，Safety of machinery−Electrical equipment of machines−Part 32: Requirements for hoisting machines（MOD） | |
| JIS B 9960-33:2012 機械類の安全性−機械の電気装置−第33部：半導体製造装置に対する要求事項 | IEC 60204-33:2009，Safety of machinery−Electrical equipment of machines−Part 33: Requirements for semiconductor fabrication equipment（IDT） | |
| JIS B 9962 機械類の安全性−機械類のケーブルレス制御システムに対する要求事項 | IEC 62745，Safety of machinery−Requirements for cableless control systems of machinery（IDT） JIS C 0365 感電保護−設備及び機器の共通事項 | |
| JIS C 0451 電気及び関連分野−プラント，システム及び装置用の技術文書の分類及び指定 | IEC 61355，Collection of standardized and established document kinds (available at http://std.iec.ch/iec61355)（IDT） | |
| JIS C 0455 電気及び関連分野−工業用システム，設備及び装置，並びに工業製品−システムにおける接続端の識別 | IEC 61666，Industrial systems, installations and equipment and industrial products−Identification of terminals within a system | |
| JIS C 1302 絶縁抵抗計 | IEC 61557-1，Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.−Equipment for testing, measuring or monitoring of protective measures−Part 1: General requirements 及び IEC 61557-2，Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.−Equipment for testing, measuring or monitoring of protective measures−Part 2: Insulation resistance（MOD） | |
| JIS C 3664:2007 絶縁ケーブルの導体 | IEC 60228:2004，Conductors of insulated cables（IDT） | |
| JIS C 3665（規格群） 電気ケーブル及び光ファイバケーブルの燃焼試験 | IEC 60332 (all parts)，Tests on electric and optical fibre cables under fire conditions（IDT） | |
| JIS C 4003 電気絶縁−熱的耐久性評価及び呼び方 | IEC 60085，Electrical insulation−Thermal evaluation and designation（MOD） | |
| JIS C 5381-12:2014 低圧サージ防護デバイス−第12部：低圧配電システムに接続する低圧サージ防護デバイスの選定及び適用基準 | IEC 61643-12:2008，Low-voltage surge protective devices−Part 12: Surge protective devices connected to low-voltage power distribution systems−Selection and application principles（IDT） | |
| JIS C 8201-4-1 低圧開閉装置及び制御装置−第4-1部：接触器及びモータスタータ：電気機械式接触器及びモータスタータ | IEC 60947-4-1，Low-voltage switchgear and controlgear−Part 4-1: Contactors and motor-starters−Electromechanical contactors and motor-starters（MOD） | |
| JIS C 8201-5-2:2009 低圧開閉装置及び制御装置−第5部：制御回路機器及び開閉素子−第2節：近接スイッチ | IEC 60947-5-2:2007，Low-voltage switchgear and controlgear−Part 5-2: Control circuit devices and switching elements−Proximity switches（IDT） | |
| JIS C 8201-5-8 低圧開閉装置及び制御装置−第5-8部：制御回路機器及び開閉素子−3ポジションイネーブルスイッチ | IEC 60947-5-8，Low-voltage switchgear and controlgear−Part 5-8: Control circuit devices and switching elements−Three-position enabling switches（IDT） | |
| JIS C 8269-1 低電圧ヒューズ−第1部：通則 | IEC 60269-1:2006，Low-voltage fuses−Part 1: General requirements（IDT） | |
| JIS C 60364（規格群） 低圧電気設備 | IEC 60364 (all parts)，Low-voltage electrical installations（IDT） | |
| JIS C 61000-6-1:2008 電磁両立性−第6-1部：共通規格−住宅，商業及び軽工業環境におけるイミュニティ | IEC 61000-6-1:2005，Electromagnetic compatibility (EMC)−Part 6-1: Generic standards−Immunity for residential, commercial and light-industrial environments（IDT） | |
| JIS C 61000-6-2:2008 電磁両立性−第6-2部：共通規格−工業環境におけるイミュニティ | IEC 61000-6-2:2005，Electromagnetic compatibility (EMC)−Part 6-2: Generic standards−Immunity for industrial environments（IDT） | |
| JIS C 61558-2-2 変圧器，電源装置，リアクトル及びこれに類する装置の安全性−第2-2部：制御変圧器及び制御変圧器を組み込んだ電源装置の個別要求事項及び試験 | IEC 61558-2-2，Safety of power transformers, power supplies, reactors and similar products−Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers（MOD） | |
| JIS C 61558-2-16 入力電圧1 100V以下の変圧器，リアクトル，電源装置及びこれに類する装置の安全性−第2-16部：スイッチモード電源装置及びスイッチモード電源装置用変圧器の個別要求事項及び試験 | IEC 61558-2-16，Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V−Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units（MOD） | |
| JIS Z 9290-1:2014 雷保護−第1部：一般原則 | IEC 62305-1:2010，Protection against lightning−Part 1: General principles（IDT） | |
| JIS Z 9290-4:2016 雷保護−第4部：建築物等内の電気及び電子システム | IEC 62305-4:2010，Protection against lightning−Part 4: Electrical and electronic systems within structures（IDT） | |
| IEC 60034-5，Rotating electrical machines−Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code)−Classification IEC 60034-11，Rotating electrical machines−Part 11: Thermal protection | ||
| IEC 60038:2009，IEC standard voltages IEC 60050，International Electrotechnical Vocabulary（＜http://www.electropedia.org＞にある。） | ||
| IEC 60073:2002，Basic and safety principles for man-machine interface, marking and identification−Coding principles for indicators and actuators | ||
| IEC 60216 (all parts)，Electrical insulating materials−Thermal endurance properties | ||
| IEC 60287 (all parts)，Electric cables−Calculation of the current rating | ||
| IEC 60320-1，Appliance couplers for household and similar general purposes−Part 1: General requirements | ||
| IEC 60335 (all parts)，Household and similar electrical appliances−Safety | ||
| IEC 60447:2004，Basic and safety principles for man-machine interface, marking and identification−Actuating principles | ||
| IEC TR 60755，General requirements for residual current operated protective devices | ||
| IEC 60757:1983，Code for designation of colours IEC 60884-1，Plugs and socket-outlets for household and similar purposes−Part1: General requirements | ||
| IEC TR 60890，A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation | ||
| IEC 60909-0:2001，Short-circuit currents in three-phase a.c. systems−Part 0: Calculation of currents | ||
| IEC TR 60909-1:2002，Short-circuit currents in three-phase a.c. systems−Part 1: Factors for the calculation of short-circuit currents according to | ||
| IEC 60909-0 IEC 60947-1:2007，Low-voltage switchgear and controlgear−Part 1: General rules IEC 60947-7-1:2009，Low-voltage switchgear and controlgear−Part 7-1: Ancillary equipment−Terminal blocks for copper conductors | ||
| IEC 61000-5-2:1997，Electromagnetic compatibility (EMC)−Part 5: Installation and mitigation guidelines−Section 2: Earthing and cabling | ||
| IEC 61000-6-3:2006，Electromagnetic compatibility (EMC)−Part 6-3: Generic standards−Emission standard for residential, commercial and light-industrial environments | ||
| IEC 61000-6-4:1997，Electromagnetic compatibility (EMC)−Part 6: Generic standards−Section 4: Emission standard for industrial environments | ||
| IEC 61082-1:2014，Preparation of documents used in electrotechnology−Part 1: Rules | ||
| IEC 61084 (all parts)，Cable trunking and ducting systems for electrical installations | ||
| IEC 61175，Industrial systems, installations and equipment and industrial products−Designation of signals | ||
| IEC 61180 (all parts)，High-voltage test techniques for low-voltage equipment | ||
| IEC TR 61200-53:1994，Electrical installation guide−Part 53: Selection and erection of electrical equipment−Switchgear and controlgear | ||
| IEC 61204-7，Low-voltage switch mode power supplies−Part 7: Safety requirements | ||
| IEC 61496-1:2004，Safety of machinery−Electro-sensitive protective equipment−Part 1: General requirements and tests IEC 61506，Industrial-process measurement and control−Documentation of application software | ||
| IEC 61557 (all parts)，Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.−Equipment for testing, measuring or monitoring of protective measures | ||
| IEC 61784-3，Industrial communication networks−Profiles−Part 3: Functional safety fieldbuses−General rules and profile definitions | ||
| IEC 61800 (all parts)，Adjustable speed electrical power drive systems IEC TR 61912-1:2007，Low-voltage switchgear and controlgear−Overcurrent protective devices−Part 1: Application of short-circuit ratings | ||
| IEC 62020，Electrical accessories−Residual current monitors for household and similar uses (RCMs) | ||
| IEC 62027:2011，Preparation of object lists, including parts lists | ||
| IEC 62491，Industrial systems, installations and equipment and industrial products−Labelling of cables and cores | ||
| IEC 62507-1，Identification systems enabling unambiguous information interchange−Requirements−Part 1: Principles and methods | ||
| IEC PAS 62569-1，Generic specification of information on products−Part 1: Principles and methods | ||
| IEC 81346-1:2009，Industrial systems, installations and equipment and industrial products−Structuring principles and reference designations−Part 1: Basic rules | ||
| IEC 81346-2:2009，Industrial systems, installations and equipment and industrial products−Structuring principles and reference designations−Part 2: Classification of objects and codes for classes | ||
| IEC 82079-1:2012，Preparation of instructions for use−Structuring, content and presentation−Part 1: General principles and detailed requirements | ||
| IEC Guide 106:1996，Guide for specifying environmental conditions for equipment performance rating | ||
| ISO 3864-1:2011，Graphical symbols−Safety colours and safety signs−Part 1: Design principles for safety signs and safety markings | ||
| ISO 7000:2014，Graphical symbols for use on equipment−Registered symbols | ||
| ISO 13732-1，Ergonomics of the thermal environment−Methods for the assessment of human responses to contact with surfaces−Part 1: Hot surfaces CENELEC HD 516 S2，Guide to use of low-voltage harmonized cables | ||
| EN 50160:2010，Voltage characteristics of electricity supplied by public electricity networks | ||
| EN 50160:2010/AMD1:2015 UL 508A，UL Standard for Safety for Industrial Control Panels, second Edition, 2013 revised 2014. NFPA 79，Electrical Standard for Industrial Machinery, 2015 edition. |
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
https://qiita.com/kaizen_nagoya/items/8782c2b85d52aa98a6d9
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements NR & B.
https://qiita.com/kaizen_nagoya/items/cb5e98ade542493b6375