2018年10月15日にDropBoxが、 glibc2.9以上でないと使えなくなった。

現在、CentOS7のglibcは、yumで更新できるものは2.7まででしたので、DropBoxでは、glibc2.27を使うように対応しました。

sudo su
wget https://ftp.gnu.org/gnu/bison/bison-3.1.tar.gz
tar zxf bison-3.1.tar.gz
cd bison-3.1
./configure --prefix=/opt/bison-3.1
./configure
yum -y install gcc gcc-c++ gcc-gnat libgnat libgnat-devel m4 automake autoconf gettext gperf autogen flex texinfo python-sphinx diffutils patch
./configure --prefix=/opt/bison-3.1
make
make install
mkdir -p /opt/glibc-2.27/etc/ld.so.conf.d
cp /etc/ld.so.conf /opt/glibc-2.27/etc/
ls /etc/ld.so.conf.d/kernel-ml-4.18.14-1.el7.elrepo.x86_64.conf
cp /etc/ld.so.conf.d/kernel-ml-4.18.14-1.el7.elrepo.x86_64.conf /opt/glibc-2.27/etc/ld.so.conf.d
cd ..
wget https://ftp.gnu.org/gnu/glibc/glibc-2.27.tar.gz
tar xzvf glibc-2.27.tar.gz
cd glibc-2.27
mkdir build
cd build
PATH=$PATH:/opt/bison-3.1/bin ../configure --prefix=/opt/glibc-2.27 --with-headers=/opt/kernel-ml-headers/usr/include
PATH=$PATH:/opt/bison-3.1/bin ../configure --prefix=/opt/glibc-2.27 --with-headers=/opt/kernel-ml-headers/usr/includePATH=$PATH:/opt/bison-3.1/bin make
PATH=$PATH:/opt/bison-3.1/bin make
PATH=$PATH:/opt/bison-3.1/bin make install
exit
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
rpm -Uvh https://www.elrepo.org/elrepo-release-6-8.el6.elrepo.noarch.rpm
rpm -Uvh https://www.elrepo.org/elrepo-release-6-8.el6.elrepo.noarch.rpm
rpm -Uvh https://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm
yum-config-manager --enable elrepo-kernel
yum install kernel-ml.x86_64
yumdownloader kernel-ml-headers.x86_64
rpm -ihv -r /opt/kernel-ml-headers kernel-ml-headers-4.18.14-1.el7.elrepo.x86_64.rpm
yumdownloader libselinux-devel
rpm -ihv -r /opt/kernel-ml-headers libselinux-devel-2.5-12.el7.x86_64.rpmrpm -ihv -r /opt/kernel-ml-headers libselinux-devel-2.5-12.el7.x86_64.rpm --nodeps
rpm -ihv -r /opt/kernel-ml-headers libselinux-devel-2.5-12.el7.x86_64.rpm --nodeps
yum install centos-release-scl patchelf
yum-config-manager --enable rhel-server-rhscl-7-rpms
yum install devtoolset-7
scl enable devtoolset-7 bash
exit

wget -O - https://www.dropbox.com/download?plat=lnx.x86_64 | tar xzf -
patchelf --set-interpreter /opt/glibc-2.27/lib/ld-2.27.so ~/.dropbox-dist/dropbox-lnx.x86_64-59.4.93/dropbox
patchelf --set-rpath /opt/glibc-2.27/lib ~/.dropbox-dist/dropbox-lnx.x86_64-59.4.93/dropbox
ln -s /lib64/libgcc_s.so.1 .dropbox-dist/dropbox-lnx.x86_64-59.4.93/
ln -s /usr/lib64/libstdc++.so.6 .dropbox-dist/dropbox-lnx.x86_64-59.4.93/
ln -s /lib64/libz.so.1 .dropbox-dist/dropbox-lnx.x86_64-59.4.93/
ln -s /lib64/libgthread-2.0.so.0 .dropbox-dist/dropbox-lnx.x86_64-59.4.93/
ln -s /lib64/libglib-2.0.so.0 .dropbox-dist/dropbox-lnx.x86_64-59.4.93/
wget https://www.dropboxwiki.com/tips-and-tricks/using-the-official-dropbox-command-line-interface-cli
vi using-the-official-dropbox-command-line-interface-cli
LD_LIBRARY_PATH=~/.dropbox-dist/dropbox-lnx.x86_64-59.4.93 dropbox.py start
wget -O ~/bin/dropbox.py https://www.dropbox.com/download?dl=packages/dropbox.py
chmod +x ~/bin/dropbox.py
~/bin/dropbox.py help
~/bin/dropbox.py status
yum install pcre-devel
sudo yum install pcre-devel
ln -s /lib64/libpcre.so.1 .dropbox-dist/dropbox-lnx.x86_64-59.4.93/
~/.dropbox-dist/dropbox-lnx.x86_64-59.4.93 dropbox.py start
dropbox.py start
`