Cisco 3560CX-12TCS++ V04 enable ipservices on CLI

Cisco 3560CX-12TCS++ V04のipservicesをCLIで有効化する

enabling ipservices on Cisco 3560CX-12TCS++ V04 from CLI

ip vrf コマンドが使えないと相談があり調査
IOSの更新で対応するのか調べたが別の記事を見つけた

参照：Right-To-Use ライセンスの設定
https://www.cisco.com/c/ja_jp/td/docs/switches/lan/catalyst9500/software/release/16-6/configuration_guide/sys_mgmt/b_166_sys_mgmt_9500_cg/b_166_sys_mgmt_9500_cg_chapter_010.pdf

Switch#license right-to-use activate ipservices ?
  acceptEULA    Accept  the EULA without reading it now
  evaluation    evaluation  Activate Evaluation License
  subscription  subscription  Activate subscription License
  <cr>

Switch#license right-to-use activate ipservices ac
Switch#license right-to-use activate ipservices acceptEULA ?
  <cr>

Switch#license right-to-use activate ipservices acceptEULA
 Activated Permanent Right-To-Use ipservices license

 Next Reboot level is ipservices

show version compair

before

Switch#show version
Cisco IOS Software, C3560CX Software (C3560CX-UNIVERSALK9-M), 
# 略
License Level: ipbase                          # <-
License Type: Default. No valid license found. # <-
Next reload license Level: ipbase              # <-
# 略

after

Switch#show version
# 略
Cisco IOS Software, C3560CX Software (C3560CX-UNIVERSALK9-M), V

License Level: ipservices              # <-
License Type: Permanent Right-To-Use   # <-
Next reload license Level: ipservices  # <-
# 略