SDにいれて、起動後

tc@box:~$ sudo fdisk -u /dev/mmcblk0

Command (m for help): p　←★
Disk /dev/mmcblk0: 489 MB, 513277952 bytes, 1002496 sectors
489 cylinders, 64 heads, 32 sectors/track
Units: sectors of 1 * 512 = 512 bytes

Device       Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/mmcblk0p1    4,0,1       37,63,32          8192      77823      69632 34.0M  c Win95 FAT32 (LBA)
/dev/mmcblk0p2    38,0,1      48,63,32         77824     100351      22528 11.0M 83 Linux

Command (m for help): d　←★
2　←★

Command (m for help): n　
Command action
   e   extended
   p   primary partition (1-4)
p　←★
Partition number (1-4): 2　←★
First sector (32-1002495, default 32): 77824　←★２番めのStartLBAの値
Last sector or +size or +sizeM or +sizeK (77824-1002495, default 1002495): Using default value 1002495　←★デフォルトでOK

Command (m for help): w　←★
The partition table has been altered.
Calling ioctl() to re-read partition table
fdisk: WARNING: rereading partition table failed, kernel still uses old table: Device or resource busy
tc@box:~$ sudo reboot　←★

sudo resize2fs /dev/mmcblk0p2

ホスト名

sudo vi /opt/bootsync.sh

/usr/bin/sethostname box
を
/usr/bin/sethostname hogehoge
に

usb-camera

tce-load -wi v4l-dvb-4.9.22-piCore.tcz
tce-load -wi libv4l2.tcz
tce-load -wi fontconfig.tcz
tce-load -wi ffmpeg.tcz
ffmpeg -f video4linux2 -s 640x480 -i /dev/video0 -vframes 1 ./test.jpg

ssh

sudo vi /usr/local/etc/ssh/sshd_config

ラズパイカメラ

sudo mkdir /boot && sudo mount -t vfat /dev/mmcblk0p1 /boot/ && sudo vi /boot/config.txt

[ALL]の直後に下記を追記

gpu_mem=128
start_file=start_x.elf
fixup_file=fixup_x.dat

sudo vi /opt/bootlocal.sh

で

chmod 777 /dev/vchiq
chmod 777 /dev/vcsm

を追記

filetool.sh -b

tce-load -wi rpi-vc.tcz
raspistill -o test.jpg

python

tce-load -iw python3.6

wget https://bootstrap.pypa.io/get-pip.py
sudo -E -H python3.6 get-pip.py
sudo -E -H pip3.6 install requests

tce-load -wi python3.6-RPi.GPIO.tcz 
>>> import RPi.GPIO as GPIO

vi /opt/.filetool.lst

で

usr/local/lib/python3.6/site-packages/

を追記

filetool.sh -b

音

tce-load -wi alsa-utils.tcz
aplay -l
amixer cset numid=3 1
aplay --duration=5 crows1.wav

X系

tce-load -iw TC.tcz
startx

参考

https://github.com/SergiSM/Raspberry/wiki/piCore
https://shrimp.marokun.net/wiki/?TinyCoreLinux

apt的なもの

tce

busybox-httpd　をいれても良いかも

ログインメッセージを変える

vi /etc/motd

でイジってから

vi /opt/.filetool.lst

で

etc/motd

を追記して

filetool.sh -b