Specification of CAN Transceiver Driver, No.71, 2021-11
AUTOSAR R22-11記事一覧はこちら。
用語(terms)
| Term | Description |
|---|---|
| ComM | Communication Manager |
| DEM | Diagnostic Event Manager |
| DET | Default Error Tracer |
| DIO | Digital Input Output (SPAL module) |
| EB | Externally Buffered channels. Buffers containing data to transfer are outside the SPI Handler/Driver. |
| EcuM | ECU State Manager |
| IB | Internally Buffered channels. Buffers containing data to transfer are inside the SPI Handler/Driver. |
| ISR | Interrupt Service Routine |
| MCAL | Micro Controller Abstraction Layer |
| Port | Port module (SPAL module) |
| n/a | Not Applicable |
| SBC | System Basis Chip; a device, which integrates e.g. CAN and/or LIN transceiver, watchdog and power control. |
| SPAL | Standard Peripheral Abstraction Layer |
| SPI Channel | A channel is a software exchange medium for data that are defined with the same criteria: configuration parameters, number of data elements with same size and data pointers (source & destination) or location. See specification of SPI driver for more details. |
| SPI Job | A job is composed of one or several channels with the same chip select. A job is considered to be atomic and therefore cannot be interrupted. A job has also an assigned priority. See specification of SPI driver for more details. |
| SPI Sequence | A sequence is a number of consecutive jobs to be transmitted. A sequence depends on a static configuration. See specification of SPI driver for more details. |
| CAN Channel | A physical channel which is connected to a CAN network from a CAN controller through a CAN transceiver. |
| API | Application Programming Interface |
英日単語帳
日本語は仮訳
T.B.D.
参考(reference)
[1] List of Basic Software Modules
AUTOSAR_TR_BSWModuleList.pdf
[2] Layered Software Architecture
AUTOSAR_EXP_LayeredSoftwareArchitecture.pdf
[3] Specification of ECU Configuration
AUTOSAR_TPS_ECUConfiguration.pdf
[4] General Requirements on Basic Software
AUTOSAR_SRS_BSWGeneral.pdf
[5] Specification of Specification of CAN Interface
AUTOSAR_SWS_CANInterface.pdf
[6] Basic Software Module Description Template,
AUTOSAR_TPS_BSWModuleDescriptionTemplate.pdf
[7] General Specification of Basic Software Modules
AUTOSAR_SWS_BSWGeneral.pdf
[8] ISO11898 – Road vehicles - Controller area network (CAN)
ISO 11898-1:2015
Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
3 Normative references
ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model — Part 1
ISO/IEC/IEEE 8802-3:2014, Standard for Ethernet — Part 3
Bibliography
[1] ISO 7637-3, Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
[2] ISO 11992-1, Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 1: Physical and data-link layers
[3] ISO/IEC 8802-2, Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 2: Logical link control
[4] ISO/IEC 8802-2:1998/Cor 1:2000
ISO 11898-2:2016
Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
2 Normative references
ISO 11898-1:2015, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
ISO 16845-2, Road vehicles — Controller area network (CAN) conformance test plan — Part 2: High-speed medium access unit with selective wake-up functionality
Bibliography
[1] ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
[2] ISO 11898-3, Road vehicles — Controller area network (CAN) — Part 3: Low-speed, fault-tolerant, medium-dependent interface
[3] ISO 11898-4, Road vehicles — Controller area network (CAN) — Part 4: Time-triggered communication
[4] ISO 11898-5, Road vehicles — Controller area network (CAN) — Part 5: High-speed medium access unit with low-power mode
[5] ISO 11898-6, Road vehicles — Controller area network (CAN) — Part 6: High-speed medium access unit with selective wake-up functionality
ISO 11898-3:2006
Road vehicles — Controller area network (CAN) — Part 3: Low-speed, fault-tolerant, medium-dependent interface
ISO 11898-4:2004
Road vehicles — Controller area network (CAN) — Part 4: Time-triggered communication
Countdown Calendar 2022
今年企画した6つのCountdown Calendarと、それぞれの記事一つをご紹介します。
AUTOSAR Countdown Calendar 2022
AUTOSAR References to ISO, IEC, ITU, IEEE, RFC and SEA etc.
Automotive Handbook Countdown Calendar 2022
Basic principles, ボッシュ自動車handbook(英語)11版まとめ<2>
2022 いいねをいただいた記事ランキング(O.K.版) Countdown Calendar 2022
2022年１月下旬 いいねをいただいた記事 16
CDCale(O.K.) Countdown Calendar 2022
「会議は15分未満」に。小耳にはさんだ話。
ABC language (O.K.版） Advent Calendar 2022
LLVMソースコードのコンパイルをしようと思ってハマった罠とそこから脱出するための努力
ABC maker(O.K版） Advent Calendar 2022
JAXA/IPA クリティカルソフトウェアワークショップ WOCS言語関連発表(改定版)
CountdownCalendar2022 報告
関連文書(Related document)
2023年1月 記事数一覧
年末100記事を30点に仕上げる。
2023 書き初め
「はじめてのCAN/CANFD 」 ベクタージャパン ＜エンジニア夏休み企画>【読書感想文】
三方良し Udemy 車載LAN入門講座 CAN通信編
詳解 車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(1) 著者 ＜エンジニア夏休み企画 読書感想文＞
詳解 車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(2)参考文献 ＜エンジニア夏休み企画>【読書感想文】
詳解 車載ネットワーク CAN、CAN FD、LIN、CXPI、Ethernetの仕組みと設計のために
更新資料 Abstract Platform, Vehicle Modelへの対応版
Specification of CAN Transceiver Driver, No.71, CP, AUTOSAR 22-11(2)
＜この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。＞
文書履歴(document history)
ver. 0.01 初稿 20221201
ver. 0.02 URL追記 20230109