ドンキの NANOTE NEXT に Debian bullseye を入れる → bookworm に上げた

自分が何をやったかの記録に。

機種

/proc/cpuinfo

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 92
model name      : Intel(R) Pentium(R) CPU J4205 @ 1.50GHz
stepping        : 9
microcode       : 0x48
cpu MHz         : 1044.285
cache size      : 1024 KB
physical id     : 0
siblings        : 4
core id         : 0
cpu cores       : 4
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 21
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch cpuid_fault cat_l2 ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust smep erms mpx rdt_a rdseed smap clflushopt intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts md_clear arch_capabilities
vmx flags       : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs
bugs            : monitor spectre_v1 spectre_v2
bogomips        : 2995.20
clflush size    : 64
cache_alignment : 64
address sizes   : 39 bits physical, 48 bits virtual
power management:

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 92
model name      : Intel(R) Pentium(R) CPU J4205 @ 1.50GHz
stepping        : 9
microcode       : 0x48
cpu MHz         : 800.000
cache size      : 1024 KB
physical id     : 0
siblings        : 4
core id         : 1
cpu cores       : 4
apicid          : 2
initial apicid  : 2
fpu             : yes
fpu_exception   : yes
cpuid level     : 21
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch cpuid_fault cat_l2 ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust smep erms mpx rdt_a rdseed smap clflushopt intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts md_clear arch_capabilities
vmx flags       : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs
bugs            : monitor spectre_v1 spectre_v2
bogomips        : 2995.20
clflush size    : 64
cache_alignment : 64
address sizes   : 39 bits physical, 48 bits virtual
power management:

processor       : 2
vendor_id       : GenuineIntel
cpu family      : 6
model           : 92
model name      : Intel(R) Pentium(R) CPU J4205 @ 1.50GHz
stepping        : 9
microcode       : 0x48
cpu MHz         : 1814.412
cache size      : 1024 KB
physical id     : 0
siblings        : 4
core id         : 2
cpu cores       : 4
apicid          : 4
initial apicid  : 4
fpu             : yes
fpu_exception   : yes
cpuid level     : 21
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch cpuid_fault cat_l2 ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust smep erms mpx rdt_a rdseed smap clflushopt intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts md_clear arch_capabilities
vmx flags       : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs
bugs            : monitor spectre_v1 spectre_v2
bogomips        : 2995.20
clflush size    : 64
cache_alignment : 64
address sizes   : 39 bits physical, 48 bits virtual
power management:

processor       : 3
vendor_id       : GenuineIntel
cpu family      : 6
model           : 92
model name      : Intel(R) Pentium(R) CPU J4205 @ 1.50GHz
stepping        : 9
microcode       : 0x48
cpu MHz         : 1971.414
cache size      : 1024 KB
physical id     : 0
siblings        : 4
core id         : 3
cpu cores       : 4
apicid          : 6
initial apicid  : 6
fpu             : yes
fpu_exception   : yes
cpuid level     : 21
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch cpuid_fault cat_l2 ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust smep erms mpx rdt_a rdseed smap clflushopt intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts md_clear arch_capabilities
vmx flags       : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs
bugs            : monitor spectre_v1 spectre_v2
bogomips        : 2995.20
clflush size    : 64
cache_alignment : 64
address sizes   : 39 bits physical, 48 bits virtual
power management:

dmesg

[    0.000000] microcode: microcode updated early to revision 0x48, date = 2021-11-16
[    0.000000] Linux version 5.18.0-0.bpo.1-amd64 ([e-mail]) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_DYNAMIC Debian 5.18.2-1~bpo11+1 (2022-06-14)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.18.0-0.bpo.1-amd64 root=UUID=3369fba3-75c0-4803-9991-27c10788830a ro fbcon=rotate:1 quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x000000007789cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007789d000-0x0000000079997fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079998000-0x00000000799b5fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000799b6000-0x0000000079a1afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000079a1b000-0x0000000079e57fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079e58000-0x0000000079eacfff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000079ead000-0x000000007a227fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a228000-0x000000007a228fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007a229000-0x000000007a252fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a253000-0x000000007a794fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a795000-0x000000007a796fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a797000-0x000000007affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi: TPMFinalLog=0x799e9000 ACPI=0x7999e000 ACPI 2.0=0x7999e000 SMBIOS=0x79c66000 SMBIOS 3.0=0x79c65000 ESRT=0x76935bd8 MOKvar=0x74085000 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M., BIOS S8A70R100-V005 04/07/2022
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1497.600 MHz processor
[    0.000039] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000048] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000069] last_pfn = 0x280000 max_arch_pfn = 0x400000000
[    0.000127] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000374] last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[    0.007500] esrt: Reserving ESRT space from 0x0000000076935bd8 to 0x0000000076935c10.
[    0.007514] e820: update [mem 0x76935000-0x76935fff] usable ==> reserved
[    0.007547] e820: update [mem 0x74085000-0x74087fff] usable ==> reserved
[    0.007582] Using GB pages for direct mapping
[    0.009720] RAMDISK: [mem 0x2de7b000-0x32f34fff]
[    0.009735] ACPI: Early table checksum verification disabled
[    0.009744] ACPI: RSDP 0x000000007999E000 000024 (v02 ALASKA)
[    0.009753] ACPI: XSDT 0x000000007999E0C0 0000EC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009767] ACPI: FACP 0x00000000799A7FF0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.009780] ACPI: DSDT 0x000000007999E250 009D9D (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.009788] ACPI: FACS 0x0000000079A1A080 000040
[    0.009794] ACPI: FPDT 0x00000000799A8110 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009801] ACPI: FIDT 0x00000000799A8160 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009809] ACPI: MSDM 0x00000000799A8200 000055 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.009816] ACPI: MCFG 0x00000000799A8260 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.009823] ACPI: DBG2 0x00000000799A82A0 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.009831] ACPI: DBGP 0x00000000799A8320 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.009838] ACPI: HPET 0x00000000799A8360 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.009845] ACPI: LPIT 0x00000000799A83A0 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.009852] ACPI: APIC 0x00000000799A8400 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.009859] ACPI: NPKT 0x00000000799A8490 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.009866] ACPI: PRAM 0x00000000799A8500 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.009873] ACPI: SSDT 0x00000000799A8530 00414C (v02 INTEL  DptfTab  00000003 BRXT 0100000D)
[    0.009880] ACPI: SSDT 0x00000000799AC680 003621 (v02 INTEL  RVPRtd3  00000003 BRXT 0100000D)
[    0.009888] ACPI: SSDT 0x00000000799AFCB0 00077D (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
[    0.009895] ACPI: SSDT 0x00000000799B0430 0016E9 (v01 Intel_ Platform 00001000 INTL 20120913)
[    0.009903] ACPI: SSDT 0x00000000799B1B20 0004BD (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.009911] ACPI: SSDT 0x00000000799B1FE0 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.009919] ACPI: SSDT 0x00000000799B2710 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20120913)
[    0.009926] ACPI: SSDT 0x00000000799B2A40 00017C (v02 PmRef  ApTst    00003000 INTL 20120913)
[    0.009933] ACPI: SSDT 0x00000000799B2BC0 002760 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.009941] ACPI: UEFI 0x00000000799B5320 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.009948] ACPI: TPM2 0x00000000799B5370 000034 (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.009955] ACPI: WDAT 0x00000000799B53B0 000104 (v01                 00000000      00000000)
[    0.009962] ACPI: NHLT 0x00000000799B54C0 00053E (v00 INTEL  EDK2     00000002      01000013)
[    0.009968] ACPI: Reserving FACP table memory at [mem 0x799a7ff0-0x799a8103]
[    0.009972] ACPI: Reserving DSDT table memory at [mem 0x7999e250-0x799a7fec]
[    0.009975] ACPI: Reserving FACS table memory at [mem 0x79a1a080-0x79a1a0bf]
[    0.009978] ACPI: Reserving FPDT table memory at [mem 0x799a8110-0x799a8153]
[    0.009980] ACPI: Reserving FIDT table memory at [mem 0x799a8160-0x799a81fb]
[    0.009983] ACPI: Reserving MSDM table memory at [mem 0x799a8200-0x799a8254]
[    0.009986] ACPI: Reserving MCFG table memory at [mem 0x799a8260-0x799a829b]
[    0.009989] ACPI: Reserving DBG2 table memory at [mem 0x799a82a0-0x799a8311]
[    0.009991] ACPI: Reserving DBGP table memory at [mem 0x799a8320-0x799a8353]
[    0.009994] ACPI: Reserving HPET table memory at [mem 0x799a8360-0x799a8397]
[    0.009997] ACPI: Reserving LPIT table memory at [mem 0x799a83a0-0x799a83fb]
[    0.009999] ACPI: Reserving APIC table memory at [mem 0x799a8400-0x799a8483]
[    0.010002] ACPI: Reserving NPKT table memory at [mem 0x799a8490-0x799a84f4]
[    0.010005] ACPI: Reserving PRAM table memory at [mem 0x799a8500-0x799a852f]
[    0.010008] ACPI: Reserving SSDT table memory at [mem 0x799a8530-0x799ac67b]
[    0.010011] ACPI: Reserving SSDT table memory at [mem 0x799ac680-0x799afca0]
[    0.010014] ACPI: Reserving SSDT table memory at [mem 0x799afcb0-0x799b042c]
[    0.010017] ACPI: Reserving SSDT table memory at [mem 0x799b0430-0x799b1b18]
[    0.010020] ACPI: Reserving SSDT table memory at [mem 0x799b1b20-0x799b1fdc]
[    0.010022] ACPI: Reserving SSDT table memory at [mem 0x799b1fe0-0x799b270a]
[    0.010025] ACPI: Reserving SSDT table memory at [mem 0x799b2710-0x799b2a3c]
[    0.010028] ACPI: Reserving SSDT table memory at [mem 0x799b2a40-0x799b2bbb]
[    0.010031] ACPI: Reserving SSDT table memory at [mem 0x799b2bc0-0x799b531f]
[    0.010034] ACPI: Reserving UEFI table memory at [mem 0x799b5320-0x799b5361]
[    0.010037] ACPI: Reserving TPM2 table memory at [mem 0x799b5370-0x799b53a3]
[    0.010040] ACPI: Reserving WDAT table memory at [mem 0x799b53b0-0x799b54b3]
[    0.010043] ACPI: Reserving NHLT table memory at [mem 0x799b54c0-0x799b59fd]
[    0.010197] No NUMA configuration found
[    0.010200] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[    0.010226] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff]
[    0.011243] Zone ranges:
[    0.011246]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011251]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.011255]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
[    0.011259]   Device   empty
[    0.011262] Movable zone start for each node
[    0.011268] Early memory node ranges
[    0.011269]   node   0: [mem 0x0000000000001000-0x000000000003efff]
[    0.011273]   node   0: [mem 0x0000000000040000-0x000000000009dfff]
[    0.011276]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.011279]   node   0: [mem 0x0000000012151000-0x000000007789cfff]
[    0.011281]   node   0: [mem 0x0000000079ead000-0x000000007a227fff]
[    0.011284]   node   0: [mem 0x000000007a253000-0x000000007a794fff]
[    0.011286]   node   0: [mem 0x000000007a797000-0x000000007affffff]
[    0.011289]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
[    0.011294] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[    0.011305] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.011311] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.011412] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.023636] On node 0, zone DMA32: 8529 pages in unavailable ranges
[    0.023913] On node 0, zone DMA32: 9744 pages in unavailable ranges
[    0.023952] On node 0, zone DMA32: 43 pages in unavailable ranges
[    0.024008] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.025427] On node 0, zone Normal: 20480 pages in unavailable ranges
[    0.025456] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.025664] ACPI: PM-Timer IO Port: 0x408
[    0.025684] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.025690] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.025692] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.025694] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.025732] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.025739] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.025744] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.025753] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.025756] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.025770] TSC deadline timer available
[    0.025774] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.025857] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.025866] PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[    0.025871] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.025876] PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
[    0.025881] PM: hibernation: Registered nosave memory: [mem 0x74085000-0x74087fff]
[    0.025886] PM: hibernation: Registered nosave memory: [mem 0x76935000-0x76935fff]
[    0.025891] PM: hibernation: Registered nosave memory: [mem 0x7789d000-0x79997fff]
[    0.025893] PM: hibernation: Registered nosave memory: [mem 0x79998000-0x799b5fff]
[    0.025896] PM: hibernation: Registered nosave memory: [mem 0x799b6000-0x79a1afff]
[    0.025898] PM: hibernation: Registered nosave memory: [mem 0x79a1b000-0x79e57fff]
[    0.025900] PM: hibernation: Registered nosave memory: [mem 0x79e58000-0x79eacfff]
[    0.025905] PM: hibernation: Registered nosave memory: [mem 0x7a228000-0x7a228fff]
[    0.025907] PM: hibernation: Registered nosave memory: [mem 0x7a229000-0x7a252fff]
[    0.025912] PM: hibernation: Registered nosave memory: [mem 0x7a795000-0x7a796fff]
[    0.025918] PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[    0.025920] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[    0.025922] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[    0.025924] PM: hibernation: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[    0.025926] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.025928] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
[    0.025930] PM: hibernation: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[    0.025932] PM: hibernation: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[    0.025935] PM: hibernation: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[    0.025937] PM: hibernation: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[    0.025939] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.025941] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.025943] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.025945] PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[    0.025947] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.025949] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.025951] PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.025956] [mem 0x80000000-0xcfffffff] available for PCI devices
[    0.025959] Booting paravirtualized kernel on bare hardware
[    0.025966] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.034645] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.035437] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[    0.035462] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[    0.035472] pcpu-alloc: [0] 0 1 2 3 
[    0.035568] Fallback order for Node 0: 0 
[    0.035583] Built 1 zonelists, mobility grouping on.  Total pages: 2025936
[    0.035587] Policy zone: Normal
[    0.035591] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.18.0-0.bpo.1-amd64 root=UUID=3369fba3-75c0-4803-9991-27c10788830a ro fbcon=rotate:1 quiet
[    0.035721] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.18.0-0.bpo.1-amd64", will be passed to user space.
[    0.037737] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.038749] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.038845] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.096496] Memory: 1821400K/8233016K available (12294K kernel code, 2773K rwdata, 8304K rodata, 2500K init, 5132K bss, 435288K reserved, 0K cma-reserved)
[    0.097987] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.098050] ftrace: allocating 38688 entries in 152 pages
[    0.108772] ftrace: allocated 152 pages with 3 groups
[    0.110181] Dynamic Preempt: voluntary
[    0.110337] rcu: Preemptible hierarchical RCU implementation.
[    0.110340] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.110344] 	Trampoline variant of Tasks RCU enabled.
[    0.110346] 	Rude variant of Tasks RCU enabled.
[    0.110347] 	Tracing variant of Tasks RCU enabled.
[    0.110349] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.110351] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.122029] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.122574] random: crng init done
[    0.122652] Console: colour dummy device 80x25
[    0.122697] printk: console [tty0] enabled
[    0.122745] ACPI: Core revision 20211217
[    0.123150] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.123265] APIC: Switch to symmetric I/O mode setup
[    0.124604] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.129486] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.147211] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
[    0.147226] Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.20 BogoMIPS (lpj=5990400)
[    0.147233] pid_max: default: 32768 minimum: 301
[    0.156664] LSM: Security Framework initializing
[    0.156703] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.156779] AppArmor: AppArmor initialized
[    0.156784] TOMOYO Linux initialized
[    0.156885] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.156928] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.157558] CPU0: Thermal monitoring enabled (TM1)
[    0.157722] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.157728] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.157743] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.157747] Spectre V2 : Mitigation: Retpolines
[    0.157749] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.157750] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.157754] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.162629] Freeing SMP alternatives memory: 32K
[    0.162946] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1774
[    0.162975] smpboot: CPU0: Intel(R) Pentium(R) CPU J4205 @ 1.50GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[    0.163220] cblist_init_generic: Setting adjustable number of callback queues.
[    0.163220] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.163220] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.163220] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.163220] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.163220] ... version:                4
[    0.163220] ... bit width:              48
[    0.163220] ... generic registers:      4
[    0.163220] ... value mask:             0000ffffffffffff
[    0.163220] ... max period:             00007fffffffffff
[    0.163220] ... fixed-purpose events:   3
[    0.163220] ... event mask:             000000070000000f
[    0.163220] rcu: Hierarchical SRCU implementation.
[    0.163220] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.163220] smp: Bringing up secondary CPUs ...
[    0.163220] x86: Booting SMP configuration:
[    0.163220] .... node  #0, CPUs:      #1 #2 #3
[    0.172008] smp: Brought up 1 node, 4 CPUs
[    0.172008] smpboot: Max logical packages: 1
[    0.172008] smpboot: Total of 4 processors activated (11980.80 BogoMIPS)
[    0.194784] node 0 deferred pages initialised in 20ms
[    0.196309] devtmpfs: initialized
[    0.196309] x86/mm: Memory block size: 128MB
[    0.197298] ACPI: PM: Registering ACPI NVS region [mem 0x799b6000-0x79a1afff] (413696 bytes)
[    0.197298] ACPI: PM: Registering ACPI NVS region [mem 0x7a228000-0x7a228fff] (4096 bytes)
[    0.197298] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.197298] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.197298] pinctrl core: initialized pinctrl subsystem
[    0.200591] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.201110] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.201404] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.201689] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.201738] audit: initializing netlink subsys (disabled)
[    0.201814] audit: type=2000 audit(1657534535.076:1): state=initialized audit_enabled=0 res=1
[    0.201814] thermal_sys: Registered thermal governor 'fair_share'
[    0.201814] thermal_sys: Registered thermal governor 'bang_bang'
[    0.201814] thermal_sys: Registered thermal governor 'step_wise'
[    0.201814] thermal_sys: Registered thermal governor 'user_space'
[    0.201814] thermal_sys: Registered thermal governor 'power_allocator'
[    0.201814] cpuidle: using governor ladder
[    0.201814] cpuidle: using governor menu
[    0.201814] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.201814] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.201814] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.201814] PCI: Using configuration type 1 for base access
[    0.204925] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.204949] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.204949] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.204949] ACPI: Added _OSI(Module Device)
[    0.204949] ACPI: Added _OSI(Processor Device)
[    0.204949] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.204949] ACPI: Added _OSI(Processor Aggregator Device)
[    0.204949] ACPI: Added _OSI(Linux-Dell-Video)
[    0.204949] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.204949] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.221283] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.I2C2.PMC1], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.221318] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.221329] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
[    0.225302] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.231506] ACPI: Dynamic OEM Table Load:
[    0.231529] ACPI: SSDT 0xFFFF88C24091AA00 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.233552] ACPI: Dynamic OEM Table Load:
[    0.233564] ACPI: SSDT 0xFFFF88C24091A800 00015F (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.235175] ACPI: Dynamic OEM Table Load:
[    0.235186] ACPI: SSDT 0xFFFF88C355ED3D80 00008D (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.238407] ACPI: EC: EC started
[    0.238412] ACPI: EC: interrupt blocked
[    0.347338] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.347346] ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions
[    0.347350] ACPI: Interpreter enabled
[    0.347404] ACPI: PM: (supports S0 S3 S5)
[    0.347408] ACPI: Using IOAPIC for interrupt routing
[    0.347488] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.348463] ACPI: Enabled 11 GPEs in block 00 to 7F
[    0.356026] ACPI: PM: Power Resource [SPPR]
[    0.356344] ACPI: PM: Power Resource [SPPR]
[    0.356947] ACPI: PM: Power Resource [UPPR]
[    0.357302] ACPI: PM: Power Resource [PX03]
[    0.357822] ACPI: PM: Power Resource [UPPR]
[    0.358080] ACPI: PM: Power Resource [UPPR]
[    0.359056] ACPI: PM: Power Resource [UPPR]
[    0.359422] ACPI: PM: Power Resource [UPPR]
[    0.359675] ACPI: PM: Power Resource [UPPR]
[    0.360088] ACPI: PM: Power Resource [USBC]
[    0.360289] ACPI: PM: Power Resource [LSPR]
[    0.365995] ACPI: PM: Power Resource [SDPR]
[    0.387933] ACPI: PM: Power Resource [PXP]
[    0.389033] ACPI: PM: Power Resource [PXP]
[    0.531835] ACPI: PM: Power Resource [PXP]
[    0.532811] ACPI: PM: Power Resource [PXP]
[    0.533703] ACPI: PM: Power Resource [PAUD]
[    0.538806] ACPI: PM: Power Resource [FN00]
[    0.540242] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.540262] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.541512] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.543020] PCI host bridge to bus 0000:00
[    0.543026] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.543031] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.543035] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.543038] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.543042] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[    0.543046] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
[    0.543049] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[    0.543053] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.543057] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.543098] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[    0.543361] pci 0000:00:00.1: [8086:5a8c] type 00 class 0x118000
[    0.543399] pci 0000:00:00.1: reg 0x10: [mem 0x92110000-0x92117fff 64bit]
[    0.543687] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000
[    0.543707] pci 0000:00:02.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit]
[    0.543720] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.543729] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.543763] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.543771] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.544110] pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000
[    0.544127] pci 0000:00:03.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.544358] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040100
[    0.544384] pci 0000:00:0e.0: reg 0x10: [mem 0x92118000-0x9211bfff 64bit]
[    0.544416] pci 0000:00:0e.0: reg 0x20: [mem 0x92000000-0x920fffff 64bit]
[    0.544489] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[    0.545123] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[    0.545161] pci 0000:00:0f.0: reg 0x10: [mem 0x92147000-0x92147fff 64bit]
[    0.545291] pci 0000:00:0f.0: PME# supported from D3hot
[    0.545475] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[    0.545494] pci 0000:00:12.0: reg 0x10: [mem 0x9211c000-0x9211dfff]
[    0.545506] pci 0000:00:12.0: reg 0x14: [mem 0x92144000-0x921440ff]
[    0.545517] pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
[    0.545534] pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
[    0.545544] pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
[    0.545554] pci 0000:00:12.0: reg 0x24: [mem 0x92143000-0x921437ff]
[    0.545604] pci 0000:00:12.0: PME# supported from D3hot
[    0.545911] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[    0.545935] pci 0000:00:15.0: reg 0x10: [mem 0x92100000-0x9210ffff 64bit]
[    0.546027] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.546212] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
[    0.546237] pci 0000:00:16.0: reg 0x10: [mem 0x92142000-0x92142fff 64bit]
[    0.546253] pci 0000:00:16.0: reg 0x18: [mem 0x92141000-0x92141fff 64bit]
[    0.546457] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000
[    0.546482] pci 0000:00:16.1: reg 0x10: [mem 0x92140000-0x92140fff 64bit]
[    0.546498] pci 0000:00:16.1: reg 0x18: [mem 0x9213f000-0x9213ffff 64bit]
[    0.546688] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000
[    0.546712] pci 0000:00:16.2: reg 0x10: [mem 0x9213e000-0x9213efff 64bit]
[    0.546729] pci 0000:00:16.2: reg 0x18: [mem 0x9213d000-0x9213dfff 64bit]
[    0.546939] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000
[    0.546963] pci 0000:00:16.3: reg 0x10: [mem 0x9213c000-0x9213cfff 64bit]
[    0.546979] pci 0000:00:16.3: reg 0x18: [mem 0x9213b000-0x9213bfff 64bit]
[    0.547199] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
[    0.547238] pci 0000:00:17.0: reg 0x10: [mem 0x9213a000-0x9213afff 64bit]
[    0.547257] pci 0000:00:17.0: reg 0x18: [mem 0x92139000-0x92139fff 64bit]
[    0.547488] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000
[    0.547513] pci 0000:00:17.1: reg 0x10: [mem 0x92138000-0x92138fff 64bit]
[    0.547530] pci 0000:00:17.1: reg 0x18: [mem 0x92137000-0x92137fff 64bit]
[    0.547724] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000
[    0.547749] pci 0000:00:17.2: reg 0x10: [mem 0x92136000-0x92136fff 64bit]
[    0.547765] pci 0000:00:17.2: reg 0x18: [mem 0x92135000-0x92135fff 64bit]
[    0.547951] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000
[    0.547976] pci 0000:00:17.3: reg 0x10: [mem 0x92134000-0x92134fff 64bit]
[    0.547994] pci 0000:00:17.3: reg 0x18: [mem 0x92133000-0x92133fff 64bit]
[    0.548201] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000
[    0.548226] pci 0000:00:18.0: reg 0x10: [mem 0x92132000-0x92132fff 64bit]
[    0.548243] pci 0000:00:18.0: reg 0x18: [mem 0x92131000-0x92131fff 64bit]
[    0.548440] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000
[    0.548464] pci 0000:00:18.1: reg 0x10: [mem 0x92130000-0x92130fff 64bit]
[    0.548480] pci 0000:00:18.1: reg 0x18: [mem 0x9212f000-0x9212ffff 64bit]
[    0.548671] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000
[    0.548696] pci 0000:00:18.2: reg 0x10: [mem 0x9212e000-0x9212efff 64bit]
[    0.548713] pci 0000:00:18.2: reg 0x18: [mem 0x9212d000-0x9212dfff 64bit]
[    0.548926] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000
[    0.548959] pci 0000:00:18.3: reg 0x10: [mem 0x9212c000-0x9212cfff 64bit]
[    0.548976] pci 0000:00:18.3: reg 0x18: [mem 0x9212b000-0x9212bfff 64bit]
[    0.549197] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000
[    0.549221] pci 0000:00:19.0: reg 0x10: [mem 0x9212a000-0x9212afff 64bit]
[    0.549239] pci 0000:00:19.0: reg 0x18: [mem 0x92129000-0x92129fff 64bit]
[    0.549428] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000
[    0.549452] pci 0000:00:19.1: reg 0x10: [mem 0x92128000-0x92128fff 64bit]
[    0.549470] pci 0000:00:19.1: reg 0x18: [mem 0x92127000-0x92127fff 64bit]
[    0.549663] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000
[    0.549688] pci 0000:00:19.2: reg 0x10: [mem 0x92126000-0x92126fff 64bit]
[    0.549705] pci 0000:00:19.2: reg 0x18: [mem 0x92125000-0x92125fff 64bit]
[    0.549910] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501
[    0.549934] pci 0000:00:1b.0: reg 0x10: [mem 0x92124000-0x92124fff 64bit]
[    0.549948] pci 0000:00:1b.0: reg 0x18: [mem 0x92123000-0x92123fff 64bit]
[    0.550320] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501
[    0.550347] pci 0000:00:1c.0: reg 0x10: [mem 0x92122000-0x92122fff 64bit]
[    0.550364] pci 0000:00:1c.0: reg 0x18: [mem 0x92121000-0x92121fff 64bit]
[    0.550727] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501
[    0.550750] pci 0000:00:1e.0: reg 0x10: [mem 0x92120000-0x92120fff 64bit]
[    0.550766] pci 0000:00:1e.0: reg 0x18: [mem 0x9211f000-0x9211ffff 64bit]
[    0.550966] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[    0.551278] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[    0.551351] pci 0000:00:1f.1: reg 0x10: [mem 0x9211e000-0x9211e0ff 64bit]
[    0.551432] pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
[    0.555262] ACPI: PCI: Interrupt link LNKA configured for IRQ 15
[    0.555271] ACPI: PCI: Interrupt link LNKA disabled
[    0.555397] ACPI: PCI: Interrupt link LNKB configured for IRQ 15
[    0.555401] ACPI: PCI: Interrupt link LNKB disabled
[    0.555523] ACPI: PCI: Interrupt link LNKC configured for IRQ 15
[    0.555527] ACPI: PCI: Interrupt link LNKC disabled
[    0.555652] ACPI: PCI: Interrupt link LNKD configured for IRQ 15
[    0.555656] ACPI: PCI: Interrupt link LNKD disabled
[    0.555769] ACPI: PCI: Interrupt link LNKE configured for IRQ 15
[    0.555773] ACPI: PCI: Interrupt link LNKE disabled
[    0.555886] ACPI: PCI: Interrupt link LNKF configured for IRQ 15
[    0.555890] ACPI: PCI: Interrupt link LNKF disabled
[    0.556003] ACPI: PCI: Interrupt link LNKG configured for IRQ 15
[    0.556007] ACPI: PCI: Interrupt link LNKG disabled
[    0.556120] ACPI: PCI: Interrupt link LNKH configured for IRQ 15
[    0.556124] ACPI: PCI: Interrupt link LNKH disabled
[    0.567472] ACPI Warning: GPE type mismatch (level/edge) (20211217/evxface-791)
[    0.567550] ACPI: EC: interrupt unblocked
[    0.567552] ACPI: EC: event unblocked
[    0.567577] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.567580] ACPI: EC: GPE=0x2c
[    0.567584] ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC initialization complete
[    0.567590] ACPI: \_SB_.PCI0.SBRG.H_EC: EC: Used to handle transactions and events
[    0.567799] iommu: Default domain type: Translated 
[    0.567799] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.567799] EDAC MC: Ver: 3.0.0
[    0.567799] Registered efivars operations
[    0.567799] NetLabel: Initializing
[    0.567799] NetLabel:  domain hash size = 128
[    0.567799] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.567799] NetLabel:  unlabeled traffic allowed by default
[    0.567799] PCI: Using ACPI for IRQ routing
[    0.598742] PCI: pci_cache_line_size set to 64 bytes
[    0.598900] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[    0.598904] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.598907] e820: reserve RAM buffer [mem 0x74085000-0x77ffffff]
[    0.598910] e820: reserve RAM buffer [mem 0x76935000-0x77ffffff]
[    0.598912] e820: reserve RAM buffer [mem 0x7789d000-0x77ffffff]
[    0.598915] e820: reserve RAM buffer [mem 0x7a228000-0x7bffffff]
[    0.598918] e820: reserve RAM buffer [mem 0x7a795000-0x7bffffff]
[    0.598921] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[    0.598962] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.598962] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.598962] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.598962] vgaarb: loaded
[    0.601889] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.601921] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[    0.604466] clocksource: Switched to clocksource tsc-early
[    0.621682] VFS: Disk quotas dquot_6.6.0
[    0.621721] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.622062] AppArmor: AppArmor Filesystem Enabled
[    0.622114] pnp: PnP ACPI init
[    0.622555] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.622566] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.622570] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.622574] system 00:00: [io  0x0600-0x061f] has been reserved
[    0.622578] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.624737] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.624746] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.624751] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.624755] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.624760] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.624765] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.624769] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.624774] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.624778] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.625763] pnp: PnP ACPI: found 4 devices
[    0.635078] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.635247] NET: Registered PF_INET protocol family
[    0.635580] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.638614] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.638869] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.639494] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.640021] TCP: Hash tables configured (established 65536 bind 65536)
[    0.640277] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.640402] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.640536] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.640751] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.640767] NET: Registered PF_XDP protocol family
[    0.640813] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.640821] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.640826] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.640829] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.640833] pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window]
[    0.640837] pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window]
[    0.640840] pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window]
[    0.640844] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window]
[    0.641740] PCI: CLS 64 bytes, default 64
[    0.641765] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.641768] software IO TLB: mapped [mem 0x000000006e301000-0x0000000072301000] (64MB)
[    0.641846] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
[    0.641904] clocksource: Switched to clocksource tsc
[    0.641947] Trying to unpack rootfs image as initramfs...
[    0.642739] Initialise system trusted keyrings
[    0.642762] Key type blacklist registered
[    0.642953] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.645862] zbud: loaded
[    0.646354] integrity: Platform Keyring initialized
[    0.646360] Key type asymmetric registered
[    0.646363] Asymmetric key parser 'x509' registered
[    3.196814] Freeing initrd memory: 82664K
[    3.207595] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    3.207679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    3.207785] io scheduler mq-deadline registered
[    3.209565] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.214626] thermal LNXTHERM:00: registered as thermal_zone0
[    3.214640] ACPI: thermal: Thermal Zone [TZ01] (31 C)
[    3.215271] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.218055] Linux agpgart interface v0.103
[    3.227382] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    3.228210] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    3.228217] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    3.230319] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.230741] mousedev: PS/2 mouse device common for all mice
[    3.230850] rtc_cmos 00:03: RTC can wake from S4
[    3.231926] rtc_cmos 00:03: registered as rtc0
[    3.232074] rtc_cmos 00:03: setting system clock to 2022-07-11T10:15:38 UTC (1657534538)
[    3.232117] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.232726] intel_pstate: Intel P-state driver initializing
[    3.233715] ledtrig-cpu: registered to indicate activity on CPUs
[    3.234437] efifb: probing for efifb
[    3.234465] efifb: framebuffer at 0x80000000, using 9024k, total 9024k
[    3.234469] efifb: mode is 1200x1920x32, linelength=4800, pages=1
[    3.234472] efifb: scrolling: redraw
[    3.234473] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.235056] Console: switching to colour frame buffer device 240x75
[    3.240143] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.255172] fb0: EFI VGA frame buffer device
[    3.278158] NET: Registered PF_INET6 protocol family
[    3.288051] Segment Routing with IPv6
[    3.288117] In-situ OAM (IOAM) with IPv6
[    3.288162] mip6: Mobile IPv6
[    3.288166] NET: Registered PF_PACKET protocol family
[    3.288651] mpls_gso: MPLS GSO support
[    3.289941] microcode: sig=0x506c9, pf=0x1, revision=0x48
[    3.290116] microcode: Microcode Update Driver: v2.2.
[    3.290730] resctrl: L2 allocation detected
[    3.290751] IPI shorthand broadcast: enabled
[    3.290785] sched_clock: Marking stable (3289968094, 710944)->(3299580167, -8901129)
[    3.291431] registered taskstats version 1
[    3.291439] Loading compiled-in X.509 certificates
[    3.390372] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    3.390415] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    3.391836] zswap: loaded using pool lzo/zbud
[    3.393261] Key type ._fscrypt registered
[    3.393271] Key type .fscrypt registered
[    3.393272] Key type fscrypt-provisioning registered
[    3.402105] Key type encrypted registered
[    3.402120] AppArmor: AppArmor sha1 policy hashing enabled
[    3.402862] integrity: Loading X.509 certificate: UEFI:db
[    3.402958] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    3.402961] integrity: Loading X.509 certificate: UEFI:db
[    3.402991] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    3.403651] ima: Allocated hash algorithm: sha256
[    3.436598] ima: No architecture policies found
[    3.436656] evm: Initialising EVM extended attributes:
[    3.436657] evm: security.selinux
[    3.436659] evm: security.SMACK64 (disabled)
[    3.436660] evm: security.SMACK64EXEC (disabled)
[    3.436661] evm: security.SMACK64TRANSMUTE (disabled)
[    3.436662] evm: security.SMACK64MMAP (disabled)
[    3.436663] evm: security.apparmor
[    3.436664] evm: security.ima
[    3.436666] evm: security.capability
[    3.436667] evm: HMAC attrs: 0x1
[    3.608289] Freeing unused decrypted memory: 2036K
[    3.609402] Freeing unused kernel image (initmem) memory: 2500K
[    3.627535] Write protecting the kernel read-only data: 24576k
[    3.629399] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    3.630306] Freeing unused kernel image (rodata/data gap) memory: 1936K
[    3.682373] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.682390] Run /init as init process
[    3.682393]   with arguments:
[    3.682395]     /init
[    3.682396]   with environment:
[    3.682398]     HOME=/
[    3.682399]     TERM=linux
[    3.682400]     BOOT_IMAGE=/boot/vmlinuz-5.18.0-0.bpo.1-amd64
[    3.826696] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/PNP0C09:00/PNP0C0D:00/input/input1
[    3.826798] ACPI: button: Lid Switch [LID0]
[    3.826938] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    3.826979] ACPI: button: Power Button [PWRB]
[    3.847870] ACPI: battery: Slot [BAT0] (battery present)
[    3.873408] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.900946] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.910154] ACPI: bus type drm_connector registered
[    3.920605] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[    3.920680] ACPI: bus type USB registered
[    3.920685] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[    3.920780] usbcore: registered new interface driver usbfs
[    3.920808] usbcore: registered new interface driver hub
[    3.920823] i2c i2c-2: 4/4 memory slots populated (from DMI)
[    3.920837] usbcore: registered new device driver usb
[    3.921337] SCSI subsystem initialized
[    3.922065] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    3.922148] sdhci: Secure Digital Host Controller Interface driver
[    3.922156] sdhci: Copyright(c) Pierre Ossman
[    3.931476] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev b)
[    3.931503] sdhci-pci 0000:00:1b.0: enabling device (0000 -> 0002)
[    3.947453] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    3.950503] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit
[    3.950617] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b)
[    3.951195] libata version 3.00 loaded.
[    3.962879] ahci 0000:00:12.0: version 3.0
[    3.963104] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[    3.963164] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b)
[    3.963176] sdhci-pci 0000:00:1e.0: enabling device (0000 -> 0002)
[    3.963803] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    3.963813] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
[    3.964800] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    3.964821] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[    3.965927] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    3.966250] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    3.966255] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.966257] usb usb1: Product: xHCI Host Controller
[    3.966259] usb usb1: Manufacturer: Linux 5.18.0-0.bpo.1-amd64 xhci-hcd
[    3.966261] usb usb1: SerialNumber: 0000:00:15.0
[    3.966572] hub 1-0:1.0: USB hub found
[    3.966596] hub 1-0:1.0: 8 ports detected
[    3.966925] scsi host0: ahci
[    3.967295] scsi host1: ahci
[    3.967410] ata1: SATA max UDMA/133 abar m2048@0x92143000 port 0x92143100 irq 121
[    3.967415] ata2: SATA max UDMA/133 abar m2048@0x92143000 port 0x92143180 irq 121
[    3.967713] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
[    3.970168] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    3.970183] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[    3.970190] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[    3.970274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    3.970278] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.970280] usb usb2: Product: xHCI Host Controller
[    3.970282] usb usb2: Manufacturer: Linux 5.18.0-0.bpo.1-amd64 xhci-hcd
[    3.970284] usb usb2: SerialNumber: 0000:00:15.0
[    3.970492] idma64 idma64.4: Found Intel integrated DMA 64-bit
[    3.970504] hub 2-0:1.0: USB hub found
[    3.970524] hub 2-0:1.0: 7 ports detected
[    3.976659] idma64 idma64.5: Found Intel integrated DMA 64-bit
[    3.982497] idma64 idma64.6: Found Intel integrated DMA 64-bit
[    3.988165] idma64 idma64.7: Found Intel integrated DMA 64-bit
[    3.993579] idma64 idma64.8: Found Intel integrated DMA 64-bit
[    3.994014] dw-apb-uart.8: ttyS0 at MMIO 0x92132000 (irq = 4, base_baud = 115200) is a 16550A
[    3.996314] idma64 idma64.9: Found Intel integrated DMA 64-bit
[    3.996689] dw-apb-uart.9: ttyS1 at MMIO 0x92130000 (irq = 5, base_baud = 115200) is a 16550A
[    3.998994] dw-apb-uart.10: ttyS2 at MMIO 0x9212e000 (irq = 6, base_baud = 115200) is a 16550A
[    4.001924] dw-apb-uart.11: ttyS3 at MMIO 0x9212c000 (irq = 7, base_baud = 115200) is a 16550A
[    4.004088] idma64 idma64.12: Found Intel integrated DMA 64-bit
[    4.004947] idma64 idma64.13: Found Intel integrated DMA 64-bit
[    4.005875] idma64 idma64.14: Found Intel integrated DMA 64-bit
[    4.223367] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    4.282262] ata2: SATA link down (SStatus 4 SControl 300)
[    4.374680] usb 1-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 4.53
[    4.374693] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.374696] usb 1-1: Product: USB2.0 Hub             
[    4.374698] usb 1-1: Manufacturer: VIA Labs, Inc.         
[    4.376193] hub 1-1:1.0: USB hub found
[    4.376504] hub 1-1:1.0: 5 ports detected
[    4.447377] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.448273] ata1.00: ATA-10: TS512GMTS430S, 22Z2UCFS, max UDMA/133
[    4.448477] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.449435] ata1.00: Features: Dev-Sleep
[    4.451106] ata1.00: configured for UDMA/133
[    4.461309] ahci 0000:00:12.0: port does not support device sleep
[    4.461841] scsi 0:0:0:0: Direct-Access     ATA      TS512GMTS430S    UCFS PQ: 0 ANSI: 5
[    4.555072] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[    4.555098] sd 0:0:0:0: [sda] Write Protect is off
[    4.555102] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.555129] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.558423] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    4.579619]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    4.599524] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.628919] usb 2-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 4.53
[    4.628932] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.628935] usb 2-1: Product: USB3.0 Hub             
[    4.628938] usb 2-1: Manufacturer: VIA Labs, Inc.         
[    4.631972] hub 2-1:1.0: USB hub found
[    4.632181] hub 2-1:1.0: 4 ports detected
[    4.710620] Setting dangerous option enable_fbc - tainting kernel
[    4.712370] checking generic (80000000 8d0000) vs hw (91000000 1000000)
[    4.712379] checking generic (80000000 8d0000) vs hw (80000000 10000000)
[    4.712381] fb0: switching to i915 from EFI VGA
[    4.712688] Console: switching to colour dummy device 80x25
[    4.712785] i915 0000:00:02.0: vgaarb: deactivate vga console
[    4.713536] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.713847] i915 0000:00:02.0: firmware: direct-loading firmware i915/bxt_dmc_ver1_07.bin
[    4.714087] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
[    4.747866] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    4.749305] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.749761] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    4.753435] fbcon: i915drmfb (fb0) is primary device
[    4.759501] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    4.910141] usb 1-3: New USB device found, idVendor=14cd, idProduct=8170, bcdDevice= 0.01
[    4.910151] usb 1-3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[    4.910153] usb 1-3: Product: USB Mass Storage Device
[    4.910155] usb 1-3: Manufacturer: USB Device  
[    4.910157] usb 1-3: SerialNumber: 817020130813
[    5.039514] usb 1-6: new low-speed USB device number 4 using xhci_hcd
[    5.191910] usb 1-6: New USB device found, idVendor=0603, idProduct=00f3, bcdDevice= 0.03
[    5.191929] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.319538] usb 1-1.1: new full-speed USB device number 5 using xhci_hcd
[    5.485779] usb 1-1.1: not running at top speed; connect to a high speed hub
[    5.490987] usb 1-1.1: New USB device found, idVendor=2109, idProduct=0103, bcdDevice=14.24
[    5.490999] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.491001] usb 1-1.1: Product: USB 2.0 BILLBOARD
[    5.491004] usb 1-1.1: Manufacturer: VLI Inc.
[    5.491006] usb 1-1.1: SerialNumber: 0000000000000001
[    5.563808] usb 2-1.2: new SuperSpeed USB device number 3 using xhci_hcd
[    5.586986] usb 2-1.2: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
[    5.587006] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    5.587013] usb 2-1.2: Product: USB 10/100/1000 LAN
[    5.587018] usb 2-1.2: Manufacturer: TP-LINK
[    5.587023] usb 2-1.2: SerialNumber: 000001000000
[    5.711533] usb 1-7: new high-speed USB device number 6 using xhci_hcd
[    5.861207] usb 1-7: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00
[    5.861226] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.861233] usb 1-7: Product: 802.11n WLAN Adapter
[    5.861238] usb 1-7: Manufacturer: Realtek
[    5.861243] usb 1-7: SerialNumber: 00e04c000001
[    5.939555] usb 1-1.5: new high-speed USB device number 7 using xhci_hcd
[    6.043033] usb 1-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[    6.043053] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.043060] usb 1-1.5: Product: USB Billboard Device   
[    6.043065] usb 1-1.5: Manufacturer: VIA Labs, Inc.         
[    6.043070] usb 1-1.5: SerialNumber: 0000000000000001
[    6.119774] usb 2-1.3: new SuperSpeed USB device number 4 using xhci_hcd
[    6.143602] usb 2-1.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[    6.143622] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.143630] usb 2-1.3: Product: Mass Storage Device
[    6.143635] usb 2-1.3: Manufacturer: Generic
[    6.143640] usb 2-1.3: SerialNumber: 058F84688461
[    6.267532] usb 1-8: new high-speed USB device number 8 using xhci_hcd
[    6.423706] usb 1-8: New USB device found, idVendor=32e6, idProduct=9005, bcdDevice= 0.01
[    6.423724] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.423731] usb 1-8: Product: icspring camera
[    6.423736] usb 1-8: Manufacturer: icSpring
[    6.455756] usb-storage 1-3:1.0: USB Mass Storage device detected
[    6.458147] scsi host2: usb-storage 1-3:1.0
[    6.458380] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    6.460642] hid: raw HID events driver (C) Jiri Kosina
[    6.460730] scsi host3: usb-storage 2-1.3:1.0
[    6.460908] usbcore: registered new interface driver usb-storage
[    6.466878] usbcore: registered new interface driver uas
[    7.369470] Console: switching to colour frame buffer device 240x75
[    7.405358] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    7.444747] usbcore: registered new interface driver usbhid
[    7.444757] usbhid: USB HID core driver
[    7.448756] input: HID 0603:00f3 as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.0/0003:0603:00F3.0001/input/input4
[    7.480600] scsi 3:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 6
[    7.480639] scsi 2:0:0:0: Direct-Access     USB Mass  Storage Device  1.00 PQ: 0 ANSI: 0
[    7.481100] scsi 3:0:0:1: Direct-Access     Generic- Micro SD/M2      1.08 PQ: 0 ANSI: 6
[    7.482406] sd 3:0:0:0: [sdc] Media removed, stopped polling
[    7.482518] sd 2:0:0:0: [sdb] 60751872 512-byte logical blocks: (31.1 GB/29.0 GiB)
[    7.482996] sd 2:0:0:0: [sdb] Write Protect is off
[    7.483005] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    7.483397] sd 3:0:0:1: [sdd] Media removed, stopped polling
[    7.483433] sd 2:0:0:0: [sdb] No Caching mode page found
[    7.483440] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    7.484570] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[    7.485105] sd 3:0:0:1: [sdd] Attached SCSI removable disk
[    7.486758]  sdb: sdb1
[    7.488518] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    7.507553] hid-generic 0003:0603:00F3.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0603:00f3] on usb-0000:00:15.0-6/input0
[    7.508140] input: HID 0603:00f3 Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input5
[    7.508262] input: HID 0603:00f3 Touchpad as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input6
[    7.508331] input: HID 0603:00f3 Wireless Radio Control as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input7
[    7.567391] input: HID 0603:00f3 System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input8
[    7.567443] input: HID 0603:00f3 Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input9
[    7.567596] hid-generic 0003:0603:00F3.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HID 0603:00f3] on usb-0000:00:15.0-6/input1
[    7.714783] PM: Image not found (code -22)
[    7.879542] EXT4-fs (sda5): mounted filesystem with ordered data mode. Quota mode: none.
[    7.989295] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    8.091656] systemd[1]: RTC configured in localtime, applying delta of 540 minutes to system time.
[    8.111655] systemd[1]: Inserted module 'autofs4'
[    8.166422] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    8.183990] systemd[1]: Detected architecture x86-64.
[    8.184767] systemd[1]: Set hostname to <nnnext>.
[    8.354427] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    8.394915] systemd[1]: Queued start job for default target Graphical Interface.
[    8.397987] systemd[1]: Created slice system-getty.slice.
[    8.398697] systemd[1]: Created slice system-modprobe.slice.
[    8.399329] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.399764] systemd[1]: Created slice User and Session Slice.
[    8.399937] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.400344] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.400500] systemd[1]: Reached target Remote File Systems.
[    8.400528] systemd[1]: Reached target Slices.
[    8.400901] systemd[1]: Listening on Syslog Socket.
[    8.401089] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.401201] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.401514] systemd[1]: Listening on Journal Audit Socket.
[    8.401704] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.401923] systemd[1]: Listening on Journal Socket.
[    8.402629] systemd[1]: Listening on udev Control Socket.
[    8.402859] systemd[1]: Listening on udev Kernel Socket.
[    8.404804] systemd[1]: Mounting Huge Pages File System...
[    8.406852] systemd[1]: Mounting POSIX Message Queue File System...
[    8.409030] systemd[1]: Mounting Kernel Debug File System...
[    8.411158] systemd[1]: Mounting Kernel Trace File System...
[    8.415031] systemd[1]: Starting Set the console keyboard layout...
[    8.417392] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    8.419573] systemd[1]: Starting Load Kernel Module configfs...
[    8.421734] systemd[1]: Starting Load Kernel Module drm...
[    8.424058] systemd[1]: Starting Load Kernel Module fuse...
[    8.425255] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    8.425378] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    8.428467] systemd[1]: Starting Journal Service...
[    8.431644] systemd[1]: Starting Load Kernel Modules...
[    8.433723] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.438105] systemd[1]: Starting Coldplug All udev Devices...
[    8.442142] systemd[1]: Mounted Huge Pages File System.
[    8.442544] systemd[1]: Mounted POSIX Message Queue File System.
[    8.443492] systemd[1]: Mounted Kernel Debug File System.
[    8.444058] systemd[1]: Mounted Kernel Trace File System.
[    8.445030] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    8.446018] systemd[1]: [e-mail]: Succeeded.
[    8.446509] systemd[1]: Finished Load Kernel Module configfs.
[    8.447391] systemd[1]: [e-mail]: Succeeded.
[    8.448013] systemd[1]: Finished Load Kernel Module drm.
[    8.450339] systemd[1]: Mounting Kernel Configuration File System...
[    8.450766] fuse: init (API version 7.36)
[    8.452672] systemd[1]: [e-mail]: Succeeded.
[    8.453140] systemd[1]: Finished Load Kernel Module fuse.
[    8.456621] systemd[1]: Mounting FUSE Control File System...
[    8.459100] systemd[1]: Mounted Kernel Configuration File System.
[    8.459418] EXT4-fs (sda5): re-mounted. Quota mode: none.
[    8.462077] systemd[1]: Finished Remount Root and Kernel File Systems.
[    8.464219] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    8.464356] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    8.466398] systemd[1]: Starting Load/Save Random Seed...
[    8.469240] systemd[1]: Starting Create System Users...
[    8.478932] systemd[1]: Mounted FUSE Control File System.
[    8.485381] lp: driver loaded but no devices found
[    8.494413] ppdev: user-space parallel port driver
[    8.501126] systemd[1]: Finished Load/Save Random Seed.
[    8.501546] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    8.502365] systemd[1]: Finished Load Kernel Modules.
[    8.504621] systemd[1]: Starting Apply Kernel Variables...
[    8.515433] systemd[1]: Finished Create System Users.
[    8.517561] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.538233] systemd[1]: Finished Apply Kernel Variables.
[    8.550292] systemd[1]: Finished Create Static Device Nodes in /dev.
[    8.553547] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    8.555772] systemd[1]: Finished Set the console keyboard layout.
[    8.556204] systemd[1]: Reached target Local File Systems (Pre).
[    8.594651] systemd[1]: Started Journal Service.
[    8.614691] systemd-journald[279]: Received client request to flush runtime journal.
[    8.764055] Consider using thermal netlink events interface
[    8.837973] ACPI: AC: AC Adapter [ADP1] (on-line)
[    8.941891] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.944606] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    8.944701] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    8.944761] sd 3:0:0:1: Attached scsi generic sg3 type 0
[    9.054525] mc: Linux media interface: v0.10
[    9.150512] videodev: Linux video capture interface: v2.00
[    9.154506] usbcore: registered new interface driver r8152
[    9.194829] usbcore: registered new interface driver cdc_ether
[    9.199598] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.200230] cfg80211: Loaded X.509 cert '[e-mail]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    9.200565] cfg80211: Loaded X.509 cert '[e-mail]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    9.202861] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.204869] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    9.205333] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    9.207140] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    9.231992] snd_hda_intel 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[    9.238072] input: PC Speaker as /devices/platform/pcspkr/input/input10
[    9.263545] Adding 3883004k swap on /dev/sda6.  Priority:-2 extents:1 across:3883004k SSFS
[    9.267955] usb 2-1.2: reset SuperSpeed USB device number 3 using xhci_hcd
[    9.269633] usb 1-8: Found UVC 1.00 device icspring camera (32e6:9005)
[    9.289430] pstore: Using crash dump compression: deflate
[    9.289463] pstore: Registered efi as persistent store backend
[    9.318543] r8152 2-1.2:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-3.fw
[    9.323386] input: icspring camera: icspring camer as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.0/input/input11
[    9.323679] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    9.323683] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    9.323684] RAPL PMU: hw unit of domain package 2^-14 Joules
[    9.323685] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    9.323687] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    9.343054] r8152 2-1.2:1.0: load rtl8153a-3 v2 02/07/20 successfully
[    9.346623] cryptd: max_cpu_qlen set to 1000
[    9.363848] usbcore: registered new interface driver uvcvideo
[    9.380268] snd_soc_skl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[    9.416537] r8152 2-1.2:1.0 eth0: v1.12.12
[    9.439461] SSE version of gcm_enc/dec engaged.
[    9.517309] 8723du: loading out-of-tree module taints kernel.
[    9.520123] 8723du: module verification failed: signature and/or required key missing - tainting kernel
[    9.550595] input: HID 0603:00f3 Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input12
[    9.550826] input: HID 0603:00f3 Touchpad as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input13
[    9.550969] input: HID 0603:00f3 Wireless Radio Control as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input14
[    9.551513] Bluetooth: Core ver 2.22
[    9.551588] NET: Registered PF_BLUETOOTH protocol family
[    9.551591] Bluetooth: HCI device and connection manager initialized
[    9.551601] Bluetooth: HCI socket layer initialized
[    9.551604] Bluetooth: L2CAP socket layer initialized
[    9.551611] Bluetooth: SCO socket layer initialized
[    9.585773] *********** Contents of REG_SYS_CFG 0x413135
[    9.586986] *********** Contents of REG_GPIO_OUTSTS 0x40000454
[    9.587208] *********** Contents of REG_MULTI_FUNC_CTRL 0xb205c80c
[    9.595393] *************** wrote 0x0 to EFUSE_CTRL + 1
[    9.601084] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.601886] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0x50
[    9.605298] *************** wrote 0x1 to EFUSE_CTRL + 1
[    9.605452] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.605564] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.606744] *************** wrote 0x2 to EFUSE_CTRL + 1
[    9.608592] input: HID 0603:00f3 System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input15
[    9.608705] input: HID 0603:00f3 Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:0603:00F3.0002/input/input16
[    9.608910] hid-multitouch 0003:0603:00F3.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HID 0603:00f3] on usb-0000:00:15.0-6/input1
[    9.609523] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.609691] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.609811] *************** wrote 0x3 to EFUSE_CTRL + 1
[    9.609889] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.609968] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.610790] *************** wrote 0x4 to EFUSE_CTRL + 1
[    9.611582] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.611710] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.611901] *************** wrote 0x5 to EFUSE_CTRL + 1
[    9.611969] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.612050] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.612228] *************** wrote 0x6 to EFUSE_CTRL + 1
[    9.612307] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.612399] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.612876] *************** wrote 0x7 to EFUSE_CTRL + 1
[    9.612955] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.613040] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.613157] *************** wrote 0x8 to EFUSE_CTRL + 1
[    9.613238] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.613333] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.613447] *************** wrote 0x9 to EFUSE_CTRL + 1
[    9.613523] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.613604] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.613723] *************** wrote 0xa to EFUSE_CTRL + 1
[    9.613803] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.613892] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.614018] *************** wrote 0xb to EFUSE_CTRL + 1
[    9.614096] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.614181] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.614296] *************** wrote 0xc to EFUSE_CTRL + 1
[    9.614379] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.614457] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.614578] *************** wrote 0xd to EFUSE_CTRL + 1
[    9.614660] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.614737] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.614858] *************** wrote 0xe to EFUSE_CTRL + 1
[    9.615028] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.615103] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.615215] *************** wrote 0xf to EFUSE_CTRL + 1
[    9.615455] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.615532] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.616008] *************** wrote 0x10 to EFUSE_CTRL + 1
[    9.616078] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.616160] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.618238] *************** wrote 0x11 to EFUSE_CTRL + 1
[    9.618341] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.618429] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.618545] *************** wrote 0x12 to EFUSE_CTRL + 1
[    9.618620] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.618703] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.618820] *************** wrote 0x13 to EFUSE_CTRL + 1
[    9.618901] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.618980] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.619098] *************** wrote 0x14 to EFUSE_CTRL + 1
[    9.619180] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.619269] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.619391] *************** wrote 0x15 to EFUSE_CTRL + 1
[    9.619470] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.619551] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.620597] *************** wrote 0x16 to EFUSE_CTRL + 1
[    9.620723] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.620810] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.620944] *************** wrote 0x17 to EFUSE_CTRL + 1
[    9.621016] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.621100] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.622043] *************** wrote 0x18 to EFUSE_CTRL + 1
[    9.636060] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.636518] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.637149] *************** wrote 0x19 to EFUSE_CTRL + 1
[    9.637387] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.638096] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.643111] *************** wrote 0x1a to EFUSE_CTRL + 1
[    9.643193] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.643306] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.643421] *************** wrote 0x1b to EFUSE_CTRL + 1
[    9.643497] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.643579] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.643734] *************** wrote 0x1c to EFUSE_CTRL + 1
[    9.643808] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.643890] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.644017] *************** wrote 0x1d to EFUSE_CTRL + 1
[    9.644086] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.644167] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.644287] *************** wrote 0x1e to EFUSE_CTRL + 1
[    9.644367] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.644479] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.652625] *************** wrote 0x1f to EFUSE_CTRL + 1
[    9.652706] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.653332] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.653449] *************** wrote 0x20 to EFUSE_CTRL + 1
[    9.654761] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.655488] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.655605] *************** wrote 0x21 to EFUSE_CTRL + 1
[    9.655680] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.655780] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.655893] *************** wrote 0x22 to EFUSE_CTRL + 1
[    9.655967] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.656046] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.656190] *************** wrote 0x23 to EFUSE_CTRL + 1
[    9.656265] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.656340] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.656462] *************** wrote 0x24 to EFUSE_CTRL + 1
[    9.656542] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.656621] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.656748] *************** wrote 0x25 to EFUSE_CTRL + 1
[    9.656829] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.656945] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.657060] *************** wrote 0x26 to EFUSE_CTRL + 1
[    9.657151] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.658522] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.658632] *************** wrote 0x27 to EFUSE_CTRL + 1
[    9.658712] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.658792] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.658967] *************** wrote 0x28 to EFUSE_CTRL + 1
[    9.659035] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.659115] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.659258] *************** wrote 0x29 to EFUSE_CTRL + 1
[    9.659339] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.659407] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.659523] *************** wrote 0x2a to EFUSE_CTRL + 1
[    9.659603] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.659685] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.659803] *************** wrote 0x2b to EFUSE_CTRL + 1
[    9.659900] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.659988] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.660104] *************** wrote 0x2c to EFUSE_CTRL + 1
[    9.660188] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.660270] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.660384] *************** wrote 0x2d to EFUSE_CTRL + 1
[    9.660472] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.660550] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.660754] *************** wrote 0x2e to EFUSE_CTRL + 1
[    9.660840] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.660927] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.661053] *************** wrote 0x2f to EFUSE_CTRL + 1
[    9.661133] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.661255] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.661377] *************** wrote 0x30 to EFUSE_CTRL + 1
[    9.661467] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.661533] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.661654] *************** wrote 0x31 to EFUSE_CTRL + 1
[    9.661736] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.661831] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.661947] *************** wrote 0x32 to EFUSE_CTRL + 1
[    9.662049] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.662368] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.663828] *************** wrote 0x33 to EFUSE_CTRL + 1
[    9.664087] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.666199] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.666396] *************** wrote 0x34 to EFUSE_CTRL + 1
[    9.666462] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.666552] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.666697] *************** wrote 0x35 to EFUSE_CTRL + 1
[    9.666781] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.666862] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.666979] *************** wrote 0x36 to EFUSE_CTRL + 1
[    9.667058] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.667138] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.667341] *************** wrote 0x37 to EFUSE_CTRL + 1
[    9.667421] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.667497] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.667617] *************** wrote 0x38 to EFUSE_CTRL + 1
[    9.667699] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.667780] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.668026] *************** wrote 0x39 to EFUSE_CTRL + 1
[    9.668100] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.668181] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.668306] *************** wrote 0x3a to EFUSE_CTRL + 1
[    9.668377] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.668460] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.668579] *************** wrote 0x3b to EFUSE_CTRL + 1
[    9.668658] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.668738] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.668859] *************** wrote 0x3c to EFUSE_CTRL + 1
[    9.668938] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.669018] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.669311] *************** wrote 0x3d to EFUSE_CTRL + 1
[    9.669384] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.669464] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.669584] *************** wrote 0x3e to EFUSE_CTRL + 1
[    9.669663] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.669746] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.669865] *************** wrote 0x3f to EFUSE_CTRL + 1
[    9.669946] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.670029] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.670144] *************** wrote 0x40 to EFUSE_CTRL + 1
[    9.670225] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.670316] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.670438] *************** wrote 0x41 to EFUSE_CTRL + 1
[    9.670519] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.670597] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.670717] *************** wrote 0x42 to EFUSE_CTRL + 1
[    9.670808] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.670904] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.671025] *************** wrote 0x43 to EFUSE_CTRL + 1
[    9.671110] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.671199] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.671340] *************** wrote 0x44 to EFUSE_CTRL + 1
[    9.671425] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.671725] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.671872] *************** wrote 0x45 to EFUSE_CTRL + 1
[    9.671954] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.672042] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.672167] *************** wrote 0x46 to EFUSE_CTRL + 1
[    9.672252] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.672334] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.672457] *************** wrote 0x47 to EFUSE_CTRL + 1
[    9.672551] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.672629] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.672745] *************** wrote 0x48 to EFUSE_CTRL + 1
[    9.672842] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.672927] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.673045] *************** wrote 0x49 to EFUSE_CTRL + 1
[    9.673125] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.673203] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.673337] *************** wrote 0x4a to EFUSE_CTRL + 1
[    9.673421] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.673497] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.673645] *************** wrote 0x4b to EFUSE_CTRL + 1
[    9.673724] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.673802] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.673931] *************** wrote 0x4c to EFUSE_CTRL + 1
[    9.674013] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.674092] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.674223] *************** wrote 0x4d to EFUSE_CTRL + 1
[    9.674308] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.674380] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.674505] *************** wrote 0x4e to EFUSE_CTRL + 1
[    9.674575] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.674672] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.674804] *************** wrote 0x4f to EFUSE_CTRL + 1
[    9.674886] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.674968] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.675107] *************** wrote 0x50 to EFUSE_CTRL + 1
[    9.675269] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.675347] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.675468] *************** wrote 0x51 to EFUSE_CTRL + 1
[    9.675547] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.675626] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.675748] *************** wrote 0x52 to EFUSE_CTRL + 1
[    9.675832] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.675919] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.676067] *************** wrote 0x53 to EFUSE_CTRL + 1
[    9.676142] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.676214] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.676346] *************** wrote 0x54 to EFUSE_CTRL + 1
[    9.676423] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.676500] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.676630] *************** wrote 0x55 to EFUSE_CTRL + 1
[    9.676708] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.676790] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.676909] *************** wrote 0x56 to EFUSE_CTRL + 1
[    9.676985] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.677071] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.677191] *************** wrote 0x57 to EFUSE_CTRL + 1
[    9.677258] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.677353] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.677482] *************** wrote 0x58 to EFUSE_CTRL + 1
[    9.677567] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.677641] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.677760] *************** wrote 0x59 to EFUSE_CTRL + 1
[    9.677851] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.677936] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.678071] *************** wrote 0x5a to EFUSE_CTRL + 1
[    9.678159] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.678232] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.678367] *************** wrote 0x5b to EFUSE_CTRL + 1
[    9.678444] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.678527] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.678656] *************** wrote 0x5c to EFUSE_CTRL + 1
[    9.678739] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.678843] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.678993] *************** wrote 0x5d to EFUSE_CTRL + 1
[    9.679074] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.679174] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.679344] *************** wrote 0x5e to EFUSE_CTRL + 1
[    9.679438] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.679532] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.679650] *************** wrote 0x5f to EFUSE_CTRL + 1
[    9.679737] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.679830] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.679963] *************** wrote 0x60 to EFUSE_CTRL + 1
[    9.680055] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.680136] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.680260] *************** wrote 0x61 to EFUSE_CTRL + 1
[    9.680354] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.680448] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.680574] *************** wrote 0x62 to EFUSE_CTRL + 1
[    9.680652] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.680762] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.680899] *************** wrote 0x63 to EFUSE_CTRL + 1
[    9.680984] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.681078] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.681222] *************** wrote 0x64 to EFUSE_CTRL + 1
[    9.681309] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.681409] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.681538] *************** wrote 0x65 to EFUSE_CTRL + 1
[    9.681804] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.681898] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.682024] *************** wrote 0x66 to EFUSE_CTRL + 1
[    9.682134] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.682240] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.682364] *************** wrote 0x67 to EFUSE_CTRL + 1
[    9.682446] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.682520] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.682657] *************** wrote 0x68 to EFUSE_CTRL + 1
[    9.682748] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.682832] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.682958] *************** wrote 0x69 to EFUSE_CTRL + 1
[    9.683048] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.683127] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.684274] *************** wrote 0x6a to EFUSE_CTRL + 1
[    9.684536] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.684541] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[    9.684953] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.685089] *************** wrote 0x6b to EFUSE_CTRL + 1
[    9.685172] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.685247] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.685370] *************** wrote 0x6c to EFUSE_CTRL + 1
[    9.685455] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.685517] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if 0x040100
[    9.685552] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.685703] *************** wrote 0x6d to EFUSE_CTRL + 1
[    9.685794] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.685883] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.686009] *************** wrote 0x6e to EFUSE_CTRL + 1
[    9.686110] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.686198] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.686335] *************** wrote 0x6f to EFUSE_CTRL + 1
[    9.686423] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.686510] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.687104] *************** wrote 0x70 to EFUSE_CTRL + 1
[    9.687967] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.688069] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.688191] *************** wrote 0x71 to EFUSE_CTRL + 1
[    9.688333] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.690857] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.691017] *************** wrote 0x72 to EFUSE_CTRL + 1
[    9.691418] intel_rapl_common: Found RAPL domain package
[    9.691426] intel_rapl_common: Found RAPL domain core
[    9.691429] intel_rapl_common: Found RAPL domain uncore
[    9.691432] intel_rapl_common: Found RAPL domain dram
[    9.692013] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.692100] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.692280] *************** wrote 0x73 to EFUSE_CTRL + 1
[    9.692378] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.692471] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.692577] *************** wrote 0x74 to EFUSE_CTRL + 1
[    9.692657] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.692737] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.693416] *************** wrote 0x75 to EFUSE_CTRL + 1
[    9.693635] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.693802] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.693929] *************** wrote 0x76 to EFUSE_CTRL + 1
[    9.694007] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.694087] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.694206] *************** wrote 0x77 to EFUSE_CTRL + 1
[    9.694289] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.694365] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.694485] *************** wrote 0x78 to EFUSE_CTRL + 1
[    9.694565] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.694646] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.695338] *************** wrote 0x79 to EFUSE_CTRL + 1
[    9.695417] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.695496] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.696084] *************** wrote 0x7a to EFUSE_CTRL + 1
[    9.696166] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.696242] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.696363] *************** wrote 0x7b to EFUSE_CTRL + 1
[    9.696444] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.696522] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.696646] *************** wrote 0x7c to EFUSE_CTRL + 1
[    9.696723] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.696811] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.697992] *************** wrote 0x7d to EFUSE_CTRL + 1
[    9.698170] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.698240] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.698360] *************** wrote 0x7e to EFUSE_CTRL + 1
[    9.698464] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.698532] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.698684] *************** wrote 0x7f to EFUSE_CTRL + 1
[    9.699054] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.699169] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.699726] *************** wrote 0x80 to EFUSE_CTRL + 1
[    9.699797] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.699877] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.699997] *************** wrote 0x81 to EFUSE_CTRL + 1
[    9.700077] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.700157] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.700277] *************** wrote 0x82 to EFUSE_CTRL + 1
[    9.700357] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.700441] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.700605] *************** wrote 0x83 to EFUSE_CTRL + 1
[    9.700737] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.700804] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.700929] *************** wrote 0x84 to EFUSE_CTRL + 1
[    9.701644] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.701766] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.701874] *************** wrote 0x85 to EFUSE_CTRL + 1
[    9.701954] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.702046] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.702179] *************** wrote 0x86 to EFUSE_CTRL + 1
[    9.702256] *************** wrote 0x60 to EyyFUSE_CTRL + 2
[    9.702335] *************** wrote 0x50 to EFUSE_CTRL + 3, readbyte 0xd0
[    9.785628] sof-audio-pci-intel-apl 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    9.838986] sof-audio-pci-intel-apl 0000:00:0e.0: use msi interrupt mode
[    9.896531] usbcore: registered new interface driver rtl8723du
[    9.905110] usbcore: registered new interface driver btusb
[    9.907477] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723
[    9.927045] Bluetooth: hci0: RTL: rom_version status=0 version=2
[    9.927063] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin
[    9.928890] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723d_fw.bin
[    9.928952] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin
[    9.929240] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723d_config.bin
[    9.929310] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266
[    9.950781] sof-audio-pci-intel-apl 0000:00:0e.0: NHLT_DEVICE_I2S detected, ssp_mask 0x21
[    9.950799] sof-audio-pci-intel-apl 0000:00:0e.0: hda codecs found, mask 4
[    9.956379] sof-audio-pci-intel-apl 0000:00:0e.0: firmware: direct-loading firmware intel/sof/sof-apl.ri
[    9.956410] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 1:7:0-47d07
[    9.956414] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:18:1 Kernel ABI 3:19:1
[    9.956432] sof-audio-pci-intel-apl 0000:00:0e.0: unknown sof_ext_man header type 3 size 0x30
[    9.965394] r8152 2-1.2:1.0 enx503eaa441c61: renamed from eth0
[    9.995602] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 1:7:0-47d07
[    9.995616] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:18:1 Kernel ABI 3:19:1
[   10.027518] audit: type=1400 audit(1657502145.291:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=539 comm="apparmor_parser"
[   10.027532] audit: type=1400 audit(1657502145.291:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=539 comm="apparmor_parser"
[   10.036288] audit: type=1400 audit(1657502145.299:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=540 comm="apparmor_parser"
[   10.036302] audit: type=1400 audit(1657502145.299:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=540 comm="apparmor_parser"
[   10.036306] audit: type=1400 audit(1657502145.299:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=540 comm="apparmor_parser"
[   10.041483] audit: type=1400 audit(1657502145.303:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=545 comm="apparmor_parser"
[   10.041497] audit: type=1400 audit(1657502145.303:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=545 comm="apparmor_parser"
[   10.041500] audit: type=1400 audit(1657502145.303:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=545 comm="apparmor_parser"
[   10.047684] audit: type=1400 audit(1657502145.311:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=547 comm="apparmor_parser"
[   10.055701] audit: type=1400 audit(1657502145.319:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=548 comm="apparmor_parser"
[   10.092872] rtl8723du 1-7:1.2 wlx2418c656b14b: renamed from wlan0
[   10.189495] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[   10.189547] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[   10.189589] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
[   10.189631] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[   10.189672] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[   10.189714] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[   10.189756] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[   10.189837] EDAC pnd2: b_cr_slice_channel_hash=80000dbc00000244 ret=0
[   10.189879] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[   10.189921] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.189963] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.190004] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.190046] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.190048] EDAC pnd2: Unsupported DIMM in channel 0
[   10.190050] EDAC pnd2: Unsupported DIMM in channel 1
[   10.190051] EDAC pnd2: Unsupported DIMM in channel 2
[   10.190051] EDAC pnd2: Unsupported DIMM in channel 3
[   10.190052] EDAC pnd2: Failed to register device with error -22.
[   10.226191] Bluetooth: hci0: RTL: fw version 0x828a96f1
[   10.236204] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[   10.236257] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[   10.236299] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
[   10.236341] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[   10.236382] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[   10.236424] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[   10.236465] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[   10.236558] EDAC pnd2: b_cr_slice_channel_hash=80000dbc00000244 ret=0
[   10.236600] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[   10.236642] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.236683] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.236725] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.236766] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.236769] EDAC pnd2: Unsupported DIMM in channel 0
[   10.236770] EDAC pnd2: Unsupported DIMM in channel 1
[   10.236771] EDAC pnd2: Unsupported DIMM in channel 2
[   10.236772] EDAC pnd2: Unsupported DIMM in channel 3
[   10.236773] EDAC pnd2: Failed to register device with error -22.
[   10.272120] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[   10.272181] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[   10.272223] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
[   10.272274] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[   10.272316] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[   10.272357] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[   10.272399] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[   10.272480] EDAC pnd2: b_cr_slice_channel_hash=80000dbc00000244 ret=0
[   10.272522] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[   10.272564] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.272605] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.272647] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.272688] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.272691] EDAC pnd2: Unsupported DIMM in channel 0
[   10.272692] EDAC pnd2: Unsupported DIMM in channel 1
[   10.272693] EDAC pnd2: Unsupported DIMM in channel 2
[   10.272694] EDAC pnd2: Unsupported DIMM in channel 3
[   10.272695] EDAC pnd2: Failed to register device with error -22.
[   10.356338] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[   10.356389] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[   10.356431] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
[   10.356472] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[   10.356513] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[   10.356554] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[   10.356595] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[   10.356676] EDAC pnd2: b_cr_slice_channel_hash=80000dbc00000244 ret=0
[   10.356717] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[   10.356758] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.356799] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.356841] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.356882] EDAC pnd2: d_cr_drp0=05488c093 ret=0
[   10.356884] EDAC pnd2: Unsupported DIMM in channel 0
[   10.356885] EDAC pnd2: Unsupported DIMM in channel 1
[   10.356886] EDAC pnd2: Unsupported DIMM in channel 2
[   10.356887] EDAC pnd2: Unsupported DIMM in channel 3
[   10.356888] EDAC pnd2: Failed to register device with error -22.
[   10.594410] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.594422] Bluetooth: BNEP filters: protocol multicast
[   10.594432] Bluetooth: BNEP socket layer initialized
[   10.655895] NET: Registered PF_ALG protocol family
[   10.869412] Bluetooth: RFCOMM TTY layer initialized
[   10.869433] Bluetooth: RFCOMM socket layer initialized
[   10.869444] Bluetooth: RFCOMM ver 1.11
[   12.835490] IPv6: ADDRCONF(NETDEV_CHANGE): enx503eaa441c61: link becomes ready
[   12.836209] r8152 2-1.2:1.0 enx503eaa441c61: carrier on
[   12.869322] 8021q: 802.1Q VLAN Support v1.8
[  266.027629] IPv6: ADDRCONF(NETDEV_CHANGE): wlx2418c656b14b: link becomes ready
[  279.060161] usb 2-1.2: USB disconnect, device number 3

lspci

00:00.0 Host bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Host Bridge (rev 0b)
00:00.1 Signal processing controller: Intel Corporation Device 5a8c (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Integrated Graphics Controller (rev 0b)
00:03.0 Multimedia controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Imaging Unit (rev 0b)
00:0e.0 Multimedia audio controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster (rev 0b)
00:0f.0 Communication controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Trusted Execution Engine (rev 0b)
00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller (rev 0b)
00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI (rev 0b)
00:16.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #1 (rev 0b)
00:16.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #2 (rev 0b)
00:16.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #3 (rev 0b)
00:16.3 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #4 (rev 0b)
00:17.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #5 (rev 0b)
00:17.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #6 (rev 0b)
00:17.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #7 (rev 0b)
00:17.3 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #8 (rev 0b)
00:18.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #1 (rev 0b)
00:18.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #2 (rev 0b)
00:18.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #3 (rev 0b)
00:18.3 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #4 (rev 0b)
00:19.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #1 (rev 0b)
00:19.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #2 (rev 0b)
00:19.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 (rev 0b)
00:1b.0 SD Host controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SDXC/MMC Host Controller (rev 0b)
00:1c.0 SD Host controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series eMMC Controller (rev 0b)
00:1e.0 SD Host controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SDIO Controller (rev 0b)
00:1f.0 ISA bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Low Pin Count Interface (rev 0b)
00:1f.1 SMBus: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller (rev 0b)

lsusb

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 008: ID 32e6:9005 icSpring icspring camera
Bus 001 Device 006: ID 0bda:d723 Realtek Semiconductor Corp. 802.11n WLAN Adapter
Bus 001 Device 004: ID 0603:00f3 Novatek Microelectronics Corp.
Bus 001 Device 003: ID 14cd:8170 Super Top USB Mass Storage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

SSD換装

Transcend TS512GMTS430S に換装した。

元の EAGET 2203XKR から dd で丸ごとコピーし、GParted でパーティションテーブルとパーティションサイズを修正、リカバリパーティションをディスクの末尾に移動して空いたところに Linux ファイルシステムを準備する。

Debianインストーラ

bullseye でインストールしてから bookworm にアップグレード、apt-line に non-free-firmware セクションを追加して firmware-intel-sound と firmware-sof-signed を改めてインストール、kernel は experimental の linux-image-6.3.0-0-amd64 を入れた。これで bullseye 当時にやっていたカーネルのリビルドは不要になった。

bullseye を入れたときの記録

bullseye の non-free ファームウェア入りインストーラ から firmware-11.3.0-amd64-netinst.jigdo を入手して jigdo-lite でイメージを作成、USB メモリに dd で書きこんで準備する。

上記 USB メモリと適当な USB 有線 LAN アダプタを指して起動し、Graphicalでない install を選択、表示が回転してるけどここではとにかくインストールを済ませる。

ファームウェアはありったけ入れておく。

$ sudo apt install -y alsa-firmware-loaders firmware-intel-sound firmware-linux-free firmware-linux-nonfree firmware-misc-nonfree firmware-realtek firmware-sof-signed

kernel は気分の問題だけど backports の 5.18 にした（近所なのでミラーはさくら）。どうせ後でリビルドした 5.19 を入れるのでなんでもいい。

$ cat /etc/apt/sources.list.d/backports.list
deb http://debian-mirror.sakura.ne.jp/debian/ bullseye-backports main contrib non-free
deb-src http://debian-mirror.sakura.ne.jp/debian/ bullseye-backports main contrib non-free
$ sudo apt install linux-{image,headers}-5.18.0-0.bpo.1-amd64

early KMS

# echo "i915" >> /etc/initramfs-tools/modules
# update-initramfs -k all -u

コンソールの向きを直す

$ sudo vi /etc/default/grub
このように修正：GRUB_CMDLINE_LINUX="fbcon=rotate:1"
$ sudo update-grub

Windows とデュアルブートするなら os-prober を入れて GRUB_DISABLE_OS_PROBER=false の行のコメントアウトを外す。

デフォルトのコンソールフォントだとほとんど読めないので、

/etc/default/console-setup

# CONFIGURATION FILE FOR SETUPCON

# Consult the console-setup(5) manual page.

ACTIVE_CONSOLES="/dev/tty[1-6]"

CHARMAP="UTF-8"

CODESET="guess"
FONTFACE="Terminus"
FONTSIZE="24x12"

VIDEOMODE=

# The following is an example how to use a braille font
# FONT='lat9w-08.psf.gz brl-8x8.psf'

X11

/etc/X11/xorg.conf.d/90-monitor.conf

Section "Monitor"
  Identifier "DSI1"
  Option "Rotate" "right"
#  DisplaySize 151 94
EndSection

Section "Screen"
    Identifier "Screen0"
    Monitor "DSI1"
    DefaultDepth 24
    SubSection "Display"
        Modes "1200x1920"
    EndSubSection
EndSection

Section "Device"
    Identifier "Device0"
    Driver "intel"
EndSection

$ echo "xrandr --dpi 144 &" > ~/.xprofile

無線LAN

$ sudo apt install -y build-essential git linux-headers-`uname -r`
$ git clone https://github.com/lwfinger/rtl8723du.git
$ cd rtl8723du
$ make -j4
$ sudo make install

repo についてくる dkms.conf を使うとビルドに失敗する。 現在の dkms.conf なら大丈夫だが、Debian bookworm の dkms は linux-headers を壊してしまう ので、dkms を使わずにインストールする。¹

Linux kernel のリビルド

Debian bookworm に experimental から Linux 6.3.0 を入れれば以下のリビルドは不要。たぶんもっと前のバージョンでもできた。

リビルド手順

リビルドでオーディオの Everest ES8336 とタッチスクリーン Silead MSSL1680 のドライバが含まれるようにする。
実機でやると何日かかるかわからないので、速いマシンでビルドする。ここでは WSL2 で Debian 環境を構築する。

# tee <<__EOF__ -a /etc/apt/sources.list
deb-src http://deb.debian.org/debian bullseye main contrib non-free
deb-src http://deb.debian.org/debian bullseye-updates main contrib non-free
deb-src http://ftp.debian.org/debian bullseye-backports main contrib non-free

deb http://deb.debian.org/debian experimental main contrib non-free
deb-src http://deb.debian.org/debian experimental main contrib non-free
__EOF__
# apt update
# apt install build-essential make git ccache
# apt build-dep linux
# apt install -y -t experimental linux-source-5.19

ES8336対応は以下 repo で進んでいて、それ用のブランチができているのでこれを使ってビルドする。上記 linux-source-5.19 は config だけ使う。

https://github.com/thesofproject/linux/tree/es8336-v5.19

以下のようなファイルを $HOME に置いておく。ここに NANOTE NEXT 固有のサウンドとタッチスクリーンの設定を書いておく。

config-nnnext.merge

CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_SND_SOC_INTEL_SOF_ES8336_MACH=m
CONFIG_SND_SOC_SOF_ACPI=m
CONFIG_SND_SOC_SOF_ACPI_DEV=m
CONFIG_SND_SOC_SOF_APOLLOLAKE=m
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m

SOF用設定マージスクリプト²を入れておく。

$ git clone https://github.com/thesofproject/kconfig.git

上記 kconfig ディレクトリ内で以下のパッチを適用する。

diff --git a/kconfig-distro-sof-update.sh b/kconfig-distro-sof-update.sh
index e599106..a9e9a2c 100755
--- a/kconfig-distro-sof-update.sh
+++ b/kconfig-distro-sof-update.sh
@@ -9,7 +9,6 @@ echo $KCONFIG_DIR

 echo "-sof" > localversion
 make olddefconfig
-make localmodconfig

 $COMMAND .config \
         $KCONFIG_DIR/sof-defconfig  \

$ mkdir linux-es8336
$ cd linux-es8336
$ git clone -b es8336-v5.19 --depth 1 https://github.com/thesofproject/linux.git
$ cd linux
$ xz -dc /usr/src/linux-config-5.19/config.amd64_none_amd64.xz > .config    # Debian カーネルの構成を反映させる
$ ../../kconfig/kconfig-distro-sof-update.sh    # SOF 特有の設定が .config に反映される
（何か聞かれたら Enter で答える）
$ scripts/kconfig/merge_config.sh .config ~/config-nnnext.merge    # サウンドとタッチスクリーンの設定を反映させる
$ make -j2 deb-pkg CC='ccache gcc'    # -j の数字はメモリに応じて増減させる

make が完了すると linux-es8336/ 以下に deb ファイルができているので、実機に転送して dpkg -i でインストールする。

インストールしたカーネルで再起動後、無線LANの項の手順をやり直すまで無線LANは使えない。

Dockerfile

だいたい以上と同じようなことをやる Dockerfile を書いた。

https://gist.github.com/autch/fa45abcea72e40f8c601e3d1a8a7af44

オーディオ

Everest ES8336.
Linuxで使えるようにする手順は以下のページにまとまっている。

上記カーネルのリビルド手順では最後の topology ファイルの前の工程まで済んでいる。

firmware-sof-signed パッケージをインストールし³、上記ページの es8336_topologies_main.tar.gz ファイルを入手し、展開した中身を /lib/firmware/intel/sof-tplg に置く。再起動すれば、デバイスが見えるようになる。

Linux 6.3.0-0-amd64

$ sudo dmesg|grep -e audio -e sof-
[   10.809881] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[   10.810323] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if 0x040100
[   10.810772] sof-audio-pci-intel-apl 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.850565] sof-audio-pci-intel-apl 0000:00:0e.0: use msi interrupt mode
[   10.944914] sof-audio-pci-intel-apl 0000:00:0e.0: NHLT_DEVICE_I2S detected, ssp_mask 0x21
[   10.944932] sof-audio-pci-intel-apl 0000:00:0e.0: Overriding topology with MCLK mask 0x2 from NHLT
[   10.944936] sof-audio-pci-intel-apl 0000:00:0e.0: hda codecs found, mask 4
[   11.008372] sof-audio-pci-intel-apl 0000:00:0e.0: firmware: direct-loading firmware intel/sof/sof-apl.ri
[   11.008410] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 2:2:0-57864
[   11.008415] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
[   11.008440] sof-audio-pci-intel-apl 0000:00:0e.0: unknown sof_ext_man header type 3 size 0x30
[   11.050174] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 2:2:0-57864
[   11.050188] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
[   11.156095] sof-essx8336 sof-essx8336: quirk mask 0x5
[   11.156109] sof-essx8336 sof-essx8336: quirk SSP5
[   11.175326] sof-audio-pci-intel-apl 0000:00:0e.0: firmware: direct-loading firmware intel/sof-tplg/sof-apl-es8336-ssp5.tplg
[   11.175369] sof-audio-pci-intel-apl 0000:00:0e.0: Topology: ABI 3:22:1 Kernel ABI 3:23:0
[   11.175685] sof-essx8336 sof-essx8336: ASoC: Parent card not yet available, widget card binding deferred
[   11.274054] input: sof-essx8336 Headset as /devices/pci0000:00/0000:00:0e.0/sof-essx8336/sound/card0/input18
[   11.274378] input: sof-essx8336 HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:0e.0/sof-essx8336/sound/card0/input19
[   11.274546] input: sof-essx8336 HDMI/DP,pcm=6 as /devices/pci0000:00/0000:00:0e.0/sof-essx8336/sound/card0/input20
[   11.274721] input: sof-essx8336 HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sof-essx8336/sound/card0/input21

$ aplay -l
**** ハードウェアデバイス PLAYBACK のリスト ****
カード 0: sofessx8336 [sof-essx8336], デバイス 0: ES8336 (*) []
  サブデバイス: 1/1
  サブデバイス #0: subdevice #0
カード 0: sofessx8336 [sof-essx8336], デバイス 5: HDMI 1 (*) []
  サブデバイス: 1/1
  サブデバイス #0: subdevice #0
カード 0: sofessx8336 [sof-essx8336], デバイス 6: HDMI 2 (*) []
  サブデバイス: 1/1
  サブデバイス #0: subdevice #0
カード 0: sofessx8336 [sof-essx8336], デバイス 7: HDMI 3 (*) []
  サブデバイス: 1/1
  サブデバイス #0: subdevice #0

実際のところ Linux 6.x の時点でデバイスは認識されているはず。quirk= 設定もデフォルトの 5 でよかった。

上記 topology と firmware-sof-signed パッケージが入っていれば、以下のコマンドだけで音が出せるようになるはず。

fixdac.sh

#!/bin/sh
amixer -c0 cset name='DAC Source Mux' 'LDATA TO LDAC, RDATA TO RDAC'

これを起動後に一回実行するなり systemd に登録するなりしておけば音が出る。

タッチパネル

Silead MSSL1680.

ドライバを準備する

Debian experimental の Linux 6.3 ではリビルドは不要。

それ以前での手順

上記カーネルリビルドの項で貼った `config-nnnext.merge` の

CONFIG_TOUCHSCREEN_SILEAD=m

が対応する。

ファームウェアをアレする

Windows パーティションをマウントして、

$ find /mnt/windows/Windows/System32 -iname \*silead\*

C:\Windows\System32\DriverStore\FileRepository\sileadtouch.inf_amd64_... というディレクトリがヒットするはずなので、そこから SileadTouch.sys をコピってくる。

$ git clone https://github.com/onitake/gsl-firmware.git

取ってきた sys ファイルを tools/scanwindrv に与えるとファームウェアが手に入る。

sileadtouch.inf_amd64_5874d9f37e5e7a24$ ../../gsl-firmware/tools/scanwindrv SileadTouch.sys
Found possible candidate at offset 0x0000024d
Not a firmware, ignoring
Found possible candidate at offset 0x0000de60
Writing firmware to firmware_00.fw, size = 40656 bytes

sileadtouch.inf_amd64_5874d9f37e5e7a24$ sudo mkdir /lib/firmware/silead/
sileadtouch.inf_amd64_5874d9f37e5e7a24$ sudo cp firmware_00.fw /lib/firmware/silead/mssl1680.fw

silead_ts ドライバを有効化した kernel で起動すると、うまくいけば以下のように認識される。

[    9.268212] silead_ts i2c-MSSL1680:00: supply vddio not found, using dummy regulator
[    9.280708] silead_ts i2c-MSSL1680:00: supply avdd not found, using dummy regulator
[    9.281547] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000
[    9.422542] silead_ts i2c-MSSL1680:00: firmware: direct-loading firmware silead/mssl1680.fw
[   10.885169] input: silead_ts as /devices/pci0000:00/0000:00:16.3/i2c_designware.3/i2c-4/i2c-MSSL1680:00/input/input19

この時点で X 動作中に画面に触ればマウスカーソルが動くはず。

キャリブレーション

$ sudo apt install xinput-calibrator xserver-xorg-input-evdev
$ suod apt remove xserver-xorg-input-libinput
（ここで X を再起動する。systemctl stop lightdm とか）
$ xinput_calibrator

実行ファイルは _ なのに注意。これの結果出てくる設定を /etc/X11/xorg.conf.d/ に突っ込んで X を再起動する。

うちで適当に生成してうまくいったのはこれ。evdev でやらないと Option "Calibration" 行にならないみたい。

/etc/X11/xorg.conf.d/99-calibration.conf

Section "InputClass"
        Identifier      "calibration"
        MatchProduct    "silead_ts"
        Option  "Calibration"   "7 1777 1126 18"
        Option  "SwapAxes"      "0"
EndSection

1. 壊れるとモジュールビルドの際に ERROR: Kernel configuration is invalid というエラーが出るので、このときは linux-headers-$(uname -r) パッケージを再インストールすると直る。 ↩

2. https://thesofproject.github.io/latest/getting_started/setup_linux/prepare_build_environment.html ↩

3. bookworm からは non-free-firmware セクションにある ↩