記事の推し

・ESP32のWiFi利用でWebServerに温度湿度気圧を表示した
・ESP32に給電すれば、WiFiの到達範囲なら測定値がリアルタイムでブラウザに表示できる

測定コード

# include <WiFi.h>
# include <WebServer.h>
# include "Seeed_BME280.h"
# include <Wire.h>
# include <string>

BME280 bme280;

float gT, gH, gP;

// アクセスポイントのESSIDとパスワード
const char* ssid = "********";
const char* pass = "********";
//表示用
const String sokutei_jp[] = { "気圧", "温度", "湿度" };
// WebServerクラスの変数
WebServer server(80);

void setup() {
  // シリアルポートの初期化
  Serial.begin(115200);
  if (!bme280.init()) {
      Serial.println("Device error!");
  }
  Serial.println("Device init");  
  // アクセスポイントに接続
  WiFi.begin(ssid, pass);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
  }
  // ESP32のIPアドレスを出力
  Serial.println("WiFi Connected.");
  Serial.print("IP = ");
  Serial.println(WiFi.localIP());

  // 処理するアドレスを定義
  server.on("/", handleRoot);
  server.onNotFound(handleNotFound);
  // Webサーバーを起動
  server.begin();
}

void loop() {
  //web出力
  server.handleClient();
  delay(1000);  
}

void handleRoot() {
  String html;
  int i;
  char text_gP[20], text_gT[20], text_gH[20];
  
  gP = bme280.getPressure();
  Serial.print(gP);
  Serial.print("\n");
  sprintf(text_gP, " %d Pa", int(gP));
  gT = bme280.getTemperature();
  Serial.print(gT);
  Serial.print("\n");
  sprintf(text_gT, " %3.2f C", gT);
  gH = bme280.getHumidity();
  Serial.print(gH);
  Serial.print("\n");
  sprintf(text_gH, " %3.2f ％", gH);

  // HTMLを組み立てる
  html = "<!DOCTYPE html>";
  html += "<html>";
  html += "<head>";
  html += "<meta charset=\"utf-8\">";
  html += "<title>測定する</title>";
  html += "</head>";
  html += "<body>";
  html += "<p>現在の測定値</p>";
  html += "<ul>";
  for (i = 0; i < 3; i++) {
    html += "<li>";
    html += sokutei_jp[i];
    if (i==0){
      html += text_gP;
    }
    if (i==1){
      html += text_gT;
    }
    if (i==2){
      html += text_gH;
    }    
    html += "</a></li>";
  }
  html += "</ul>";
  html += "</body>";
  html += "</html>";
  // HTMLを出力する
  server.send(200, "text/html", html);
}
void handleNotFound(void) {
  server.send(404, "text/plain", "Not Found");
}

BME280のcppと.hファイル

Seeed_BME280.cpp

Seeed_BME280.cpp

# include "Seeed_BME280.h"

bool BME280::init(int i2c_addr) {
    uint8_t retry = 0;
    uint8_t chip_id = 0;


    _devAddr = i2c_addr;
    Wire.begin();

    while ((retry++ < 5) && (chip_id != 0x60)) {
        chip_id = BME280Read8(BME280_REG_CHIPID);
        #ifdef BMP280_DEBUG_PRINT
        Serial.print("Read chip ID: ");
        Serial.println(chip_id);
        #endif
        delay(100);
    }
    if (chip_id != 0x60){
        Serial.println("Read Chip ID fail!");
        return false;
    }

    dig_T1 = BME280Read16LE(BME280_REG_DIG_T1);
    dig_T2 = BME280ReadS16LE(BME280_REG_DIG_T2);
    dig_T3 = BME280ReadS16LE(BME280_REG_DIG_T3);

    dig_P1 = BME280Read16LE(BME280_REG_DIG_P1);
    dig_P2 = BME280ReadS16LE(BME280_REG_DIG_P2);
    dig_P3 = BME280ReadS16LE(BME280_REG_DIG_P3);
    dig_P4 = BME280ReadS16LE(BME280_REG_DIG_P4);
    dig_P5 = BME280ReadS16LE(BME280_REG_DIG_P5);
    dig_P6 = BME280ReadS16LE(BME280_REG_DIG_P6);
    dig_P7 = BME280ReadS16LE(BME280_REG_DIG_P7);
    dig_P8 = BME280ReadS16LE(BME280_REG_DIG_P8);
    dig_P9 = BME280ReadS16LE(BME280_REG_DIG_P9);

    dig_H1 = BME280Read8(BME280_REG_DIG_H1);
    dig_H2 = BME280Read16LE(BME280_REG_DIG_H2);
    dig_H3 = BME280Read8(BME280_REG_DIG_H3);
    dig_H4 = (BME280Read8(BME280_REG_DIG_H4) << 4) | (0x0F & BME280Read8(BME280_REG_DIG_H4 + 1));
    dig_H5 = (BME280Read8(BME280_REG_DIG_H5 + 1) << 4) | (0x0F & BME280Read8(BME280_REG_DIG_H5) >> 4);
    dig_H6 = (int8_t)BME280Read8(BME280_REG_DIG_H6);

    writeRegister(BME280_REG_CONTROLHUMID, 0x05);  //Choose 16X oversampling
    writeRegister(BME280_REG_CONTROL, 0xB7);  //Choose 16X oversampling

    return true;
}

float BME280::getTemperature(void) {
    int32_t var1, var2;

    int32_t adc_T = BME280Read24(BME280_REG_TEMPDATA);
    // Check if the last transport successed
    if (!isTransport_OK) {
        return 0;
    }
    adc_T >>= 4;
    var1 = (((adc_T >> 3) - ((int32_t)(dig_T1 << 1))) *
            ((int32_t)dig_T2)) >> 11;

    var2 = (((((adc_T >> 4) - ((int32_t)dig_T1)) *
              ((adc_T >> 4) - ((int32_t)dig_T1))) >> 12) *
            ((int32_t)dig_T3)) >> 14;

    t_fine = var1 + var2;
    float T = (t_fine * 5 + 128) >> 8;
    return T / 100;
}

uint32_t BME280::getPressure(void) {
    int64_t var1, var2, p;

    // Call getTemperature to get t_fine
    getTemperature();
    // Check if the last transport successed
    if (!isTransport_OK) {
        return 0;
    }

    int32_t adc_P = BME280Read24(BME280_REG_PRESSUREDATA);
    adc_P >>= 4;

    var1 = ((int64_t)t_fine) - 128000;
    var2 = var1 * var1 * (int64_t)dig_P6;
    var2 = var2 + ((var1 * (int64_t)dig_P5) << 17);
    var2 = var2 + (((int64_t)dig_P4) << 35);
    var1 = ((var1 * var1 * (int64_t)dig_P3) >> 8) + ((var1 * (int64_t)dig_P2) << 12);
    var1 = (((((int64_t)1) << 47) + var1)) * ((int64_t)dig_P1) >> 33;
    if (var1 == 0) {
        return 0; // avoid exception caused by division by zero
    }
    p = 1048576 - adc_P;
    p = (((p << 31) - var2) * 3125) / var1;
    var1 = (((int64_t)dig_P9) * (p >> 13) * (p >> 13)) >> 25;
    var2 = (((int64_t)dig_P8) * p) >> 19;
    p = ((p + var1 + var2) >> 8) + (((int64_t)dig_P7) << 4);
    return (uint32_t)p / 256;
}

uint32_t BME280::getHumidity(void) {
    int32_t v_x1_u32r, adc_H;

    // Call getTemperature to get t_fine
    getTemperature();
    // Check if the last transport successed
    if (!isTransport_OK) {
        return 0;
    }

    adc_H = BME280Read16(BME280_REG_HUMIDITYDATA);

    v_x1_u32r = (t_fine - ((int32_t)76800));
    v_x1_u32r = (((((adc_H << 14) - (((int32_t)dig_H4) << 20) - (((int32_t)dig_H5) * v_x1_u32r)) + ((
                       int32_t)16384)) >> 15) * (((((((v_x1_u32r * ((int32_t)dig_H6)) >> 10) * (((v_x1_u32r * ((int32_t)dig_H3)) >> 11) + ((
                                   int32_t)32768))) >> 10) + ((int32_t)2097152)) * ((int32_t)dig_H2) + 8192) >> 14));
    v_x1_u32r = (v_x1_u32r - (((((v_x1_u32r >> 15) * (v_x1_u32r >> 15)) >> 7) * ((int32_t)dig_H1)) >> 4));
    v_x1_u32r = (v_x1_u32r < 0 ? 0 : v_x1_u32r);
    v_x1_u32r = (v_x1_u32r > 419430400 ? 419430400 : v_x1_u32r);
    return (uint32_t)(v_x1_u32r >> 12) / 1024.0;
}

float BME280::calcAltitude(float pressure) {
    if (!isTransport_OK) {
        return 0;
    }

    float A = pressure / 101325;
    float B = 1 / 5.25588;
    float C = pow(A, B);
    C = 1.0 - C;
    C = C / 0.0000225577;
    return C;
}

uint8_t BME280::BME280Read8(uint8_t reg) {
    Wire.beginTransmission(_devAddr);
    Wire.write(reg);
    Wire.endTransmission();

    Wire.requestFrom(_devAddr, 1);
    // return 0 if slave didn't response
    if (Wire.available() < 1) {
        isTransport_OK = false;
        return 0;
    } else {
        isTransport_OK = true;
    }

    return Wire.read();
}

uint16_t BME280::BME280Read16(uint8_t reg) {
    uint8_t msb, lsb;

    Wire.beginTransmission(_devAddr);
    Wire.write(reg);
    Wire.endTransmission();

    Wire.requestFrom(_devAddr, 2);
    // return 0 if slave didn't response
    if (Wire.available() < 2) {
        isTransport_OK = false;
        return 0;
    } else {
        isTransport_OK = true;
    }
    msb = Wire.read();
    lsb = Wire.read();

    return (uint16_t) msb << 8 | lsb;
}

uint16_t BME280::BME280Read16LE(uint8_t reg) {
    uint16_t data = BME280Read16(reg);
    return (data >> 8) | (data << 8);
}

int16_t BME280::BME280ReadS16(uint8_t reg) {
    return (int16_t)BME280Read16(reg);
}

int16_t BME280::BME280ReadS16LE(uint8_t reg) {
    return (int16_t)BME280Read16LE(reg);
}

uint32_t BME280::BME280Read24(uint8_t reg) {
    uint32_t data;

    Wire.beginTransmission(_devAddr);
    Wire.write(reg);
    Wire.endTransmission();

    Wire.requestFrom(_devAddr, 3);
    // return 0 if slave didn't response
    if (Wire.available() < 3) {
        isTransport_OK = false;
        return 0;
    } else if (isTransport_OK == false) {
        isTransport_OK = true;
        if (!init(_devAddr)) {
            #ifdef BMP280_DEBUG_PRINT
            Serial.println("Device not connected or broken!");
            #endif
        }
    }
    data = Wire.read();
    data <<= 8;
    data |= Wire.read();
    data <<= 8;
    data |= Wire.read();

    return data;
}

void BME280::writeRegister(uint8_t reg, uint8_t val) {
    Wire.beginTransmission(_devAddr); // start transmission to device
    Wire.write(reg);       // send register address
    Wire.write(val);         // send value to write
    Wire.endTransmission();     // end transmission
}

Seeed_BME280.h

Seeed_BME280.h

# pragma once

# ifndef _SEEED_BME280_H_
# define _SEEED_BME280_H_

# include <Arduino.h>
# include <Wire.h>

# define BME280_ADDRESS   0x76

# define BME280_REG_DIG_T1    0x88
# define BME280_REG_DIG_T2    0x8A
# define BME280_REG_DIG_T3    0x8C

# define BME280_REG_DIG_P1    0x8E
# define BME280_REG_DIG_P2    0x90
# define BME280_REG_DIG_P3    0x92
# define BME280_REG_DIG_P4    0x94
# define BME280_REG_DIG_P5    0x96
# define BME280_REG_DIG_P6    0x98
# define BME280_REG_DIG_P7    0x9A
# define BME280_REG_DIG_P8    0x9C
# define BME280_REG_DIG_P9    0x9E

# define BME280_REG_DIG_H1    0xA1
# define BME280_REG_DIG_H2    0xE1
# define BME280_REG_DIG_H3    0xE3
# define BME280_REG_DIG_H4    0xE4
# define BME280_REG_DIG_H5    0xE5
# define BME280_REG_DIG_H6    0xE7

# define BME280_REG_CHIPID          0xD0
# define BME280_REG_VERSION         0xD1
# define BME280_REG_SOFTRESET       0xE0

# define BME280_REG_CAL26           0xE1

# define BME280_REG_CONTROLHUMID    0xF2
# define BME280_REG_CONTROL         0xF4
# define BME280_REG_CONFIG          0xF5
# define BME280_REG_PRESSUREDATA    0xF7
# define BME280_REG_TEMPDATA        0xFA
# define BME280_REG_HUMIDITYDATA    0xFD

class BME280 {
  public:
    bool init(int i2c_addr = BME280_ADDRESS);
    float getTemperature(void);
    uint32_t getPressure(void);
    uint32_t getHumidity(void);
    float calcAltitude(float pressure);
  private:
    int _devAddr;
    bool isTransport_OK;

    // Calibration data
    uint16_t dig_T1;
    int16_t dig_T2;
    int16_t dig_T3;
    uint16_t dig_P1;
    int16_t dig_P2;
    int16_t dig_P3;
    int16_t dig_P4;
    int16_t dig_P5;
    int16_t dig_P6;
    int16_t dig_P7;
    int16_t dig_P8;
    int16_t dig_P9;
    uint8_t dig_H1;
    int16_t dig_H2;
    uint8_t dig_H3;
    int16_t dig_H4;
    int16_t dig_H5;
    int8_t  dig_H6;
    int32_t t_fine;

    // private functions
    uint8_t BME280Read8(uint8_t reg);
    uint16_t BME280Read16(uint8_t reg);
    uint16_t BME280Read16LE(uint8_t reg);
    int16_t BME280ReadS16(uint8_t reg);
    int16_t BME280ReadS16LE(uint8_t reg);
    uint32_t BME280Read24(uint8_t reg);
    void writeRegister(uint8_t reg, uint8_t val);
};

# endif