MicroZed Chronicles リスト http://adiuvoengineering.com/?page_id=285
@ Adam Taylor blog
https://forums.xilinx.com/t5/Xcell-Daily-Blog/Adam-Taylor-s-MicroZed-Chronicles-Part-43-XADC-Alarms-and/ba-p/496468
With this in mind, I set about creating a simple project in Vivado which consists of the Zynq PS connected to the XADC via the AXI interface. For this example, I do not use any external analog inputs but do use the device’s internal temperature measurement, which is part of the Zynq XADC.
Blogの画像の解像度が悪くてどのようなBlock Designにするのか見にくい。
次回時間が取れた時に自分でやってみよう。
(追記 2016/06/27)
ZYNQ 7 Processing SystemのIPを追加後、XADC_WIZを追加して、Run Block Automation, Run Connection Automationを実行すると以下のようになった。
以下の2つは上記のAutomationで自動的に追加された。
- Processor System Reset
- AXI Interconnect