ぽかぽかお昼寝びよりな3月9日
卒業式シーズンですね、ご卒業される皆さんおめでとうございます

春がきたのでうさぎをパリピっぽく光らせました、うさぎはかわいい🐰(３Dプリンタでまた生えてきてる)
見えないけどピンクのがじぇるねが春っぽい🌸

はんだ付けもちょっとずつ慣れてきて成長してる、といいなぁ

光るうさきばん

はんだめもめも

コードのメモ

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
 */
 
// Pin 23 has an green LED connected on most KURUMI boards.
// give it a name:
int led = 3;
int led2 = 2;


// the setup routine runs once when you press reset:
void setup() {                
  // initialize the digital pin as an output.
  pinMode(led, OUTPUT);     
 pinMode(led2, OUTPUT);  

}

// the loop routine runs over and over again forever:
void loop() {
  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(70);               // wait for a second
  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
  delay(60);               // wait for a second
  
  digitalWrite(led2, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(80);               // wait for a second
  digitalWrite(led2, LOW);    // turn the LED off by making the voltage LOW
  delay(90);               // wait for a second 
}

うさきばんふやしていきたいな

生えるうさぎ