MacOS X 10.4 Tigerには標準でnetcat(nc)コマンドが入っています。
$ nc -h
[v1.10]
connect to somewhere: nc [-options] hostname port[s] [ports] ...
listen for inbound: nc -l -p port [-options] [hostname] [port]
options:
-g gateway source-routing hop point[s], up to 8
-G num source-routing pointer: 4, 8, 12, ...
-h this cruft
-i secs delay interval for lines sent, ports scanned
-l listen mode, for inbound connects
-n numeric-only IP addresses, no DNS
-o file hex dump of traffic
-p port local port number
-r randomize local and remote ports
-s addr local source address
-u UDP mode
-v verbose [use twice to be more verbose]
-w secs timeout for connects and final net reads
-z zero-I/O mode [used for scanning]
port numbers can be individual or ranges: lo-hi [inclusive]
おそらくこれはオリジナルのncコマンドで、FreeBSDなどではOpenBSDで書き換えたバージョンが使われています。
オリジナルのncコマンドはEOFでcloseしないので、使い勝手が悪いです。
探したらありました。
なぜかglibのg_strlcpy()を使っていてstrlcpy()に代えてビルドできました。
$ ./nc -h
OpenBSD netcat )
This is nc from the netcat-openbsd package. An alternative nc is available
in the netcat-traditional package.
usage: nc [-46DdhklnrStUuvzC] [-i interval] [-P proxy_username] [-p source_port]
[-s source_ip_address] [-T ToS] [-w timeout] [-X proxy_protocol]
[-x proxy_address[:port]] [hostname] [port[s]]
Command Summary:
-4 Use IPv4
-6 Use IPv6
-D Enable the debug socket option
-d Detach from stdin
-h This help text
-i secs Delay interval for lines sent, ports scanned
-k Keep inbound sockets open for multiple connects
-l Listen mode, for inbound connects
-n Suppress name/port resolutions
-P proxyuser Username for proxy authentication
-p port Specify local port for remote connects
-q secs quit after EOF on stdin and delay of secs
-r Randomize remote ports
-s addr Local source address
-T ToS Set IP Type of Service
-C Send CRLF as line-ending
-t Answer TELNET negotiation
-U Use UNIX domain socket
-u UDP mode
-v Verbose
-w secs Timeout for connects and final net reads
-X proto Proxy protocol: "4", "5" (SOCKS) or "connect"
-x addr[:port] Specify proxy address and port
-z Zero-I/O mode [used for scanning]
Port numbers can be individual or ranges: lo-hi [inclusive]
XCode 2.5を他のマシンでダウンロードしてコピーしてインストールしてコンパイルしました。
もちろん10.4でgitは使えないので、他のマシンでダウンロードしてコピーしました。