Specification of CAN Transport Layer, AUTOSAR 22-11, CP, No.14
Specification of CAN Transport Layer, AUTOSAR 22-11, CP, No.14
AUTOSAR Countdown Calendar 2022
2022/12/09日の投稿です。
AUTOSARが、今年の版、R22-11公開しました。公開行事の模様は
AUTOSAR R22-11 Release Event 20221208
下記は想定URLです。順次確認中です。
間違っていたら、いいね を押していただいて、コメント欄にご報告くださると幸いです。
編集リクエストが、構造的な変更をしている最中に、構造的な編集リクエストをしていただくと、
何をどう直したらいいかわからなくなってしまいます。自動修復ツールがつくれていません。ごめんなさい。
文書は検索してダウンロードすることができます。
クラウドサービスにありがちな、あるのにないかのような検索結果が出ることがあります。
AUTOSAR R22-11 マラソン
AUTOSAR R22-11 Qiita 記事一覧（２）
ISO の文書を入手したら、ISOの図表を引用する予定です。
Abstract Platform との関係
ISO 各種規格に基づいた診断、通信の抽象的な定義をする。
<この項は書きかけです。順次追記します。>
文書変更(Document Change)
Clarification of PduR result value in case of transmit error
用語(terms)
| Term | Description |
|---|---|
| I- | Relative to AUTOSAR COM Interaction Layer |
| L- | Relative to the CAN Interface module which is equivalent to the Logical Link Control (the upper part of the Data Link Layer - the lower part is called Media Access Control) |
| N- | Relative to the CAN Transport Layer which is equivalent to the OSI Network Layer. |
| CAN L-SDU | This is the SDU of the CAN Interface module. It is similar to CAN N-PDU but from the CAN Interface module point of view. |
| CAN LSduId | This is the unique identifier of a SDU within the CAN Interface. It is used for referencing L-SDU’s routing properties. Consequently, in order to interact with the CAN Interface through its API, an upper layer uses CAN LSduId to refer to a CAN L-SDU Info Structure. |
| CAN N-PDU | This is the PDU of the CAN Transport Layer. It contains a unique identifier, data length and data (protocol control information plus the whole N-SDU or a part of it). |
| CAN N-SDU | This is the SDU of the CAN Transport Layer. In the AUTOSAR architecture, it is a set of data coming from the PDU Router. |
| CAN N-SDU Info Structure | This is a CAN Transport Layer internal constant structure that contains specific CAN Transport Layer information to process transmission, reception, segmentation and reassembly of the related CAN N-SDU. |
| CAN NSduId | Unique SDU identifier within the CAN Transport Layer. It is used to reference N-SDU’s routing properties. Consequently, to interact with the CAN Transport Layer via its API, an upper layer uses CAN NSduId to refer to a CAN N-SDU Info Structure. |
| I-PDU | This is the PDU of the AUTOSAR COM module. |
| PDU | In layered systems, it refers to a data unit that is specified in the protocol of a given layer. This contains user data of that layer (SDU) plus possible protocol control information. Furthermore, the PDU of layer X is the SDU of its lower layer X-1 (i.e. (X)-PDU = (X-1)-SDU). |
| PduInfoType | This type refers to a structure used to store basic information to process the transmission\reception of a PDU (or a SDU), namely a pointer to its payload in RAM and the corresponding length (in bytes). |
| SDU | In layered systems, this refers to a set of data that is sent by a user of the services of a given layer, and is transmitted to a peer service user, whilst remaining semantically unchanged. |
| BS | Block Size |
| Can | CAN Driver module |
| CAN CF | CAN Consecutive Frame N-PDU |
| CAN FC | CAN Flow Control N-PDU |
| CAN FF | CAN First Frame N-PDU |
| CAN SF | CAN Single Frame N-PDU |
| CanIf | CAN Interface |
| CanTp | CAN Transport Layer |
| CanTrcv | CAN Transceiver module |
| CF | See “CAN CF” |
| Com | AUTOSAR COM module |
| Dcm | Diagnostic Communication Manager module |
| DEM | Diagnostic Event Manager |
| DET | Default Error Tracer |
| DLC | Data Length Code (part of CAN PDU that describes the SDU length) |
| FC | See “CAN FC” |
| FF | See “CAN FF” |
| FIM | Function Inhibition Manager |
| Mtype | Message Type (possible value: diagnostics, remote diagnostics) |
| N_AI | Network Address Information (see ISO 15765-2). |
| N_Ar | Time for transmission of the CAN frame (any N-PDU) on the receiver side (see ISO 15765-2 [1]). |
| N_As | Time for transmission of the CAN frame (any N-PDU) on the sender side (see ISO 15765-2 [1]). |
| N_Br | Time until transmission of the next flow control N-PDU (see ISO 15765-2 [1]). |
| N_Bs | Time until reception of the next flow control N-PDU (see ISO 15765-2 [1]). |
| N_Cr | Time until reception of the next consecutive frame N-PDU (see ISO 15765-2 [1]). |
| N_Cs | Time until transmission of the next consecutive frame N-PDU (see ISO 15765-2 [1]). |
| N_Data | Data information of the transport layer |
| N_PCI | Protocol Control Information of the transport layer |
| N_SA | Network Source Address (see ISO 15765-2 [1]). |
| N_TA | Network Target Address (see ISO 15765-2 [1]). It might already contain the N_TAtype(physical/ function) in case of ExtendedAddressing. |
| N_TAtype | Network Target Address type (see ISO 15765-2 [1]). |
| OBD | On-Board Diagnostic |
| PDU | Protocol Data Unit |
| PduR | PDU Router |
| SDU | Service Data Unit |
| FS | Flow Status |
| CAN FD | CAN flexible data rate |
| CAN_DL | CAN frame data length |
| TX_DL | Transmit data link layer data length |
| RX_DL | Received data link layer data length |
| SF_DL | SingleFrame data length in bytes |
| Default Error Tracer | The Default Error Tracer is merely a support to SW development and integration and is not contained in the production code. The API is defined, but the functionality can be chosen and implemented by the developer according to his specific needs. |
| Diagnostic Event Manager | The Diagnostic Event Manager is a standard AUTOSAR module which is available in the production code and whose functionality is specified in the AUTOSAR project. |
| Extended addressing format | A unique CAN identifier is assigned to each combination of N_SA and Mtype. A unique address is filed to each combination of N_TA and N_TAtype in the first data byte of the CAN frame data field. N_PCI and N_Data are filed in the remaining bytes of the CAN frame data field. |
| Function Inhibition Manager | The Function Inhibition Manager (FIM) stands for the evaluation and assignment of events to the required actions for Software Components (e.g. inhibition of specific “monitoring functions”). The DEM informs and updates the Function Inhibition Manager (FIM) upon changes of the event status in order to stop or release functional entities according to assigned dependencies. An interface to the functional entities is defined and supported by the Mode Manager. The FIM is not part of the DEM. |
| Functional addressing | In the transport layer, functional addressing refers to N-SDU, of which parameter N_TAtype (which is an extension to the N_TA parameter [1] used to encode the communication model) has the value functional. This means the N-SDU is used in 1 to n communications. Thus with the CAN protocol, functional addressing will only be supported for Single Frame communication. In terms of application, functional addressing is used by the external (or internal) tester if it does not know the physical address of an ECU that should respond to a service request or if the functionality of the ECU is implemented as a distributed server over several ECUs. When functional addressing is used, the communication is a communication broadcast from the external tester to one or more ECUs (1 to n communication). Use cases are (for example) broadcasting messages, such as “ECUReset” or “Communication Control” OBD communication will always be performed as part of functional addressing. |
| Mixed addressing format | A unique CAN identifier is assigned to each combination of N_SA, N_TA, N_TAtype. N_AE is placed in the first data byte of the CAN frame data field. N_PCI and N_Data are placed in the remaining bytes of the CAN frame data field. |
| Multiple connection | The CAN Transport Layer should manage several transport protocol communication sessions at a time. |
| Normal addressing format | A unique CAN identifier is assigned to each combination of N_SA, N_TA, N_TAtype and Mtype. N_PCI and N_Data are filed in the CAN frame data field. |
| Physical addressing | In the transport layer, physical addressing refers to N-SDU, of which parameter N_TAtype (which is an extension of the N_TA parameter [1] used to encode the communication model) has the value physical. This means the N-SDU is used in 1 to 1 communication, thus physical addressing will be supported for all types of network layer messages. In terms of application, physical addressing is used by the external (or internal) tester if it knows the physical address of an ECU that should respond to a service request. When physical addressing is used, a point to point communication takes place (1 to 1 communication). Use cases are (for example) messages, such as ”ReadDataByIdentifier” or ”InputOutputControl ByIdentifier” |
| Single connection | The CAN Transport Layer will only manage one transport protocol communication session at a time. |
| Connection channel | The CAN Transport Layer is handling resources used by multiple connections in order to save RAM. When a connection becames active, the channel that is used by this connection will be unavailable for other connections. |
| Connection | A transport protocol session, either is a transmission or a reception session on a N-SDU |
英日単語帳
日本語は仮訳
T.B.D.
参考(reference)
[1] Road vehicles – Diagnostics on Controller Area Networks (CAN) – Part2: Network layer services
ISO 15765-2:2016
Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
2 Normative references
ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model — Part 1
ISO 11898-1:20152, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
Bibliography
[1] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[2] ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
[3] ISO 11898-3, Road vehicles — Controller area network (CAN) — Part 3: Low-speed, fault-tolerant, medium-dependent interface
[4] ISO 11898-4, Road vehicles — Controller area network (CAN) — Part 4: Time-triggered communication
[5] ISO 11898-5, Road vehicles — Controller area network (CAN) — Part 5: High-speed medium access unit with low-power mode
[6] ISO 11898-6, Road vehicles — Controller area network (CAN) — Part 6: High-speed medium access unit with selective wake-up functionality
[7] ISO 14229-1, Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
[8] ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
[9] ISO 14229-3, Road vehicles — Unified diagnostic services (UDS) — Part 3: Unified diagnostic services on CAN implementation (UDSonCAN)
[10] ISO 15031-2, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Guidance on terms, definitions, abbreviations and acronyms
[11] ISO 15031-5, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
[12] ISO 15031-6, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
[13] ISO 15765-1, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 1: General information and use case definition
[14] ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
[15] ISO 27145-2, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary
[16] ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary
[17] ISO 27145-4, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment
[18] SAE J1930, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations and Acronyms
[19] SAE J1939:2011, Serial Control and Communications Heavy Duty Vehicle Network — Top Level Document
[20] SAE J1939-73:2010, Application layer — Diagnostics
[21] SAE J1979, E/E Diagnostic Test Modes
[22] SAE J2012, Diagnostic Trouble Code Definitions
1 ISO 15765-3 Implementation of unified diagnostic services (UDS on CAN) has been withdrawn and replaced by ISO 14229-3 Road vehicles — Unified diagnostic services (UDS) — Part 3: Unified diagnostic services on CAN implementation (UDSonCAN)
2 The dated reference is to the first version of ISO 11898-1 that includes the definition of CAN FD. Versions after the dated reference are also valid. Future dated references are valid for CAN FD.
[2] Diagnostics on controller area network (CAN) – Part 4: Requirements for emission-related systems (Release 2005 01-04)
ISO 15765-4:2021
Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
2 Normative references
ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The Basic Model
ISO 11898-1, Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
ISO 11898-2, Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
ISO 14229-2, Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
ISO 15031-3, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use
ISO 15765-2, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
Bibliography
[1] ISO/IEC 10731, Information technology — Open Systems Interconnection — Basic Reference Model — Conventions for the definition of OSI services
[2] ISO 15031-5, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
[3] ISO 27145-3, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary
[4] SAE J1979, E/E Diagnostic Test Modes — OBDonEDS
[5] SAE J1979-2, E/E Diagnostic Test Modes — OBDonUDS
[6] SAE J1979-DA, Digital Annex of E/E Diagnostic Test Modes
[7] SAE J2178-1, Class B data communication network messages detailed header formats and physical address assignments
[3] Glossary, AUTOSAR_TR_Glossary
[4] General Specification of Basic Software Modules
AUTOSAR_SWS_BSWGeneral
[5] Specification of PDU Router
AUTOSAR_SWS_PDURouter
[6] Specification of CAN Interface
AUTOSAR_SWS_CANInterface
[7] General Requirements on Basic Software Modules
AUTOSAR_SRS_BSWGeneral
[8] Requirements on CAN
AUTOSAR_SRS_CAN
関連文書(Related document)
「はじめてのCAN/CANFD 」 ベクタージャパン ＜エンジニア夏休み企画>【読書感想文】
三方良し Udemy 車載LAN入門講座 CAN通信編
詳解 車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(1) 著者 ＜エンジニア夏休み企画 読書感想文＞
詳解 車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(2)参考文献 ＜エンジニア夏休み企画>【読書感想文】
詳解 車載ネットワーク CAN、CAN FD、LIN、CXPI、Ethernetの仕組みと設計のために
ISO15765-2 メッセージ 送受信 基礎編
PCAN-ISO-TP API・ダウンロード
PCAN-Basic API・ダウンロード
ISO-TP入門
最新URL変更記事
Specification of CAN Transport Layer, AUTOSAR 14, 22-11, CP 20230421
＜この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。＞
文書履歴(document history)
ver. 0.01 初稿 20230105
ver. 0.02 ありがとう追記 20230503
最後までおよみいただきありがとうございました。
いいね 💚、フォローをお願いします。
Thank you very much for reading to the last sentence.
Please press the like icon 💚 and follow me for your happy life.