2023年4月URL変更
この項は2023年4月21日、AUTOSARの文書のURLが変更になった。
/classic/22-11/
が
/R22-11/CP/
過去記事で、URLでエラーが出たら書き換えてみてください。

/adaptive/22-11/
は　
/R22-11/AP/

/foundation/22-11/
は　
/R22-11/FO/
です。

2023年11月URL変更

2023年11月にもAUTOSAR文書のURLが変更になっている。
/user_upload/standards/classic/21-11/
を
/standards/R21-11/CP/
などに書き換えてください。

/user_upload/standards/adaptive/21-11/
を
/standards/R21-11/AP/

/user_upload/standards/foundation/21-11/
を
/standards/R21-11/FO/

お手数をおかけします。
１年に２度URLを変更するなんて、新しい記事が書ける。とても嬉しい。

一覧

AUTOSAR R22-11 Qiita記事一覧 20230421 。

この記事の表題の最後に「20230421」を加えます。

<この項は書きかけです。順次追記します。>

AUTOSARが、2022年の版、R22-11を公開しました。

R21-11

R20-11

R19-11

文書は検索してダウンロードできます。

R20-11,R21-11, R22-11の３年分だけになりました。

公開行事の模様は

AUTOSAR R22-11 Release Event 20221208

AUTOSAR R22-11 Classic Platform 一覧はこちら。

Classic Platform Release Overview, AUTOSAR No.0 ,R22-11, CP, 20230421

要求仕様対応(Requirement and Specification)

Abstract Platformとの関係

Simulink文書と統合しVehicle Modelの基本文書に。

<この項は書きかけです。順次追記します。>

文書変更(Document Change)

• described adapted package structure in BSWUMLModel
• added appendix with all supported stereotypes and tagged values
• clarified and simplified modeling of bitrange in bitfields

用語(terms)

Term	Description
Header Files	Chapter 5.1 of each SWS document contains the BSW module’s file structure, in particular its file inclusion structure. Most modules’ include file relationships have a similar structure, in fact some parts are actually identically modeled. Therefore, the Header File structure is being modeled using a class diagram, with stereotyped classes representing the source code- and header files; see section 2.5.1.
Imported Type Definitions	SWS chapter 8.1 contains a tabular list of imported types. This table is automatically generated from the module dependency as explained in section 2.4.5.
Type Definitions	SWS chapter 8.2 contains detailed descriptions of all types defined within a given BSW module. For details on the modeling of type definitions refer to section 2.4.8.
Function Definitions	SWS chapter 8.3 contains a detailed description for each function provided by the BSW module. The description is presented in form of a table with a specific layout. The individual fields of the table are filled from the API function definitions according to section 2.4.3.
Callback Notifications	Very similar to the Function Definitions, SWS chapter 8.4 contains the callback definitions the BSW module provides. These are callbacks which will be called by other BSW modules, where the lower layer module is typically the caller. A table for each callback notification will be generated for a module’s specified callbacks according to section 2.4.7.
Scheduled Functions	Scheduled Functions are described in SWS chapter 8.5. The definition of scheduled functions in the BSW UML model is described in section 2.4.3.1.
Mandatory Interfaces	SWS chapter 8.6.1 contains a list of “mandatory interfaces” expected by the module. The list is generated from the BSW UML model according to the mandatory dependencies as described in section 2.4.5.2.
Optional Interfaces	Similarly, the list of “optional interfaces” contained in SWS chapter 8.6.2 is generated from the BSW UML model according to the optional dependencies as described in section 2.4.5.3.
Configurable Interfaces	SWS Chapter 8.6.3 contains a BSW module’s “Configurable Interfaces”. These are interfaces whose called function name can be configured using ECU configuration parameters. In AUTOSAR, these are typically used for issuing callback notifications, i.e. the module owning the configurable interface uses it to notify a (configurable) upper layer module’s callback. In other words the module defining a “Configurable Interface” calls an other module that implements these interface definition. A table for each callback notification will be generated for a module’s specified callbacks according to section 2.4.7.2.
Sequence Diagrams	In order to visualize the interaction of a BSW module with other modules, SWS Chapter 9 contains UML Sequence Diagrams for the module’s typical use cases. In order to keep such Sequence Diagrams consistent between different modules within the AUTOSAR BSW stack, they are also modeled within the BSW UML model. The diagrams are being exported to image files by the mmt tool; they are then being included by the SWS document files. For the detailed modeling guidelines see section 2.5.2
Various Diagrams	The SWS documents of various BSW modules use additional UML diagrams e.g. for either specifying core functionality, or for additionally illustrating dependencies between modules. Some concrete examples are the various state machines used throughout the AUTOSAR BSW stack, for example in the CAN State Manager or in COM manager. Whenever possible, such diagrams should also be modeled in the BSW UML model. This ensures that the sources of the document diagrams will not get lost, and also facilitates their maintenance and keeping a uniform modeling style.
Modeling of services	BSW Modules belonging to the Service Layer of the AUTOSAR Basic Software Architecture may offer their services in the form of AUTOSAR Service Interfaces. AUTOSAR Service Interfaces are described in terms of the Software Component Template rather than C-language interfaces, and they come in different flavors, e.g. ClientServerInterface, SenderReceiverInterface, ModeSwitchInterface. Consequently, their properties require a different style of modeling than the standard BSW API functions. Modeling of AUTOSAR services is described in section 2.4.9
Error classification	The SWS chapter "Error classification" (usually located within SWS chapter 7) contains detailed descriptions of all error codes the module uses for • Development Errors • Runtime Errors • Transient Faults For details on the modeling of these errors refer to section 2.4.10.

英日

日本語は仮訳

T.B.D.

参考(reference)

[1] Layered Software Architecture
AUTOSAR_EXP_LayeredSoftwareArchitecture
[2] List of Basic Software Modules
AUTOSAR_TR_BSWModuleList
[3] Glossary,AUTOSAR_TR_Glossary
https://www.autosar.org/fileadmin/standards/R22-11/FO/AUTOSAR_TR_Glossary.pdf
[4] Specification of Standard Types
AUTOSAR_SWS_StandardTypes
[5] Generic Structure Template
AUTOSAR_TPS_GenericStructureTemplate
[6] Standardized M1 Models used for the Definition of AUTOSAR
AUTOSAR_MOD_GeneralDefinitions

関連文書(Related document)

Basic principles, ボッシュ自動車handbook(英語)11版まとめ<2>

JAXA/IPA クリティカルソフトウェアワークショップ WOCS言語関連発表(改定版)

CAN(controller area network)

「はじめてのCAN/CANFD 」ベクタージャパン＜エンジニア夏休み企画>【読書感想文】

三方良し　Udemy 車載LAN入門講座 CAN通信編

詳解車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(1) 著者　＜エンジニア夏休み企画読書感想文＞

詳解車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(2)参考文献＜エンジニア夏休み企画>【読書感想文】

詳解車載ネットワーク CAN、CAN FD、LIN、CXPI、Ethernetの仕組みと設計のために

＜この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。＞

文書履歴(document history)

ver. 0.01初稿　　20230610

最後までおよみいただきありがとうございました。

いいね　💚、フォローをお願いします。

Thank you very much for reading to the last sentence.

Please press the like icon 💚　and follow me for your happy life.