Specification of Core Test , No.259, 2021-11

AUTOSAR R21-11記事一覧はこちら。

AUTOSAR 21-11, 84文書読んだ。2022年6月中に半分到達予定。

AUTOSAR 21-11, 62文書読んだ。2022年5月中に半分到達予定。

AUTOSAR R21-11(0) 仕様ダウンロード一覧。単語帳。参考文献資料作成

用語(terms)

Term	Description
MCAL	Microcomputer Abstraction Layer
DEM	Diagnostic Event Manager
DET	Default Error Tracer
CPU	Central Processing Unit
MPU	Memory Protection Unit
L1	1st level memory
L2	2nd level memory
MCU	Microcontroller Unit
BIST	Built in Self Test
IRQ	Interrupt Request
Core	A CPU plus closely located functional resources
CSUM/Checksum/signature	A numerical representation of the result of a test execution.
Background test	Background test is called periodically by a SW-scheduler/RTOS.
Foreground test	A foreground test is a synchronous test and shall not be interrupted. It is called via user application calls.
Golden (Ref.)Value	Reference value used for comparison (e.g. Checksum/Signature) to a previously computed test result value.
Good Case	The execution finished without reporting an error
Atomic sequence/atomic piece	An atomic sequence is a piece of test which shall not be interrupted.
External device	A physical external entity; e.g. a second microcontroller
Resource	A ‘hardware resource’ is the smallest unit (instance) that can be selected by a CORETest driver user. It can be tested in one or several atomic sequences. It is a core internal unit which executes a unique functionality (e.g. IRQ-controller).
Partial test(orange block in Figure3)	A partial test is defined as the test of one or more hardware resources. (A partial test is interruptible because it is executed in background mode).
Entity/unit	Hardware functionality inside the core (e.g. CPU, MMU etc.)
Caller/calling entity	The caller/calling entity is located on a higher AUTOSAR or ISO layer. It is the user of the API call.
test interval	CoreTest test Interval: the sum of all the partial tests (executed in background mode) on the hardware resources that are configured to make one complete Core test.
Test Interval Id	Identifier of a test interval, which shall be incremented by eachstart of a new test interval.

英日

日本語は仮訳

T.B.D.

参考(reference)

[1] List of Basic Software Modules
AUTOSAR_TR_BSWModuleList.pdf
[2] Layered Software Architecture
AUTOSAR_EXP_LayeredSoftwareArchitecture.pdf
[3] General Requirements on Basic Software Modules
AUTOSAR_SRS_BSWGeneral.pdf
[4] Specification of BSW Scheduler
AUTOSAR_SWS_BSW_Scheduler.pdf
[5] ECU Configuration Specification
AUTOSAR_SWS_ECUStateManager.pdf
[6] Specification of Memory Mapping
AUTOSAR_SWS_MemoryMapping.pdf
[7] Requirement on Core Test
AUTOSAR_SRS_CoreTest.pdf
[8] AUTOSAR Basic Software Module Description Template
AUTOSAR_RS_BSWModuleDescriptionTemplate.pdf
[9] General Specification of Basic Software Modules
AUTOSAR_SWS_BSWGeneral.pdf
[10] ISO 26262:2018 (all parts) - Road vehicles - Functional Safety http://www.iso.org