More than 1 year has passed since last update.

Requirements on Health Monitoring, No.878, FO, AUTOSAR R22-11(2)

Last updated at 2023-07-23Posted at 2023-02-05

Requirements on Health Monitoring, AUTOSAR R22-11, FO, No.878

AUTOSARは、ISO、IEC、ITUと情報交換契約を結んでいません。
AUTOSAR文書には、ISO、IEC,ITU記述を全文引用することはできません。
WTO/TBT協定に基づき、国際的な調達は国際規格との差異を記述することにより文化依存しない仕様を目指します。
ISO、IEC、ITU文書を合わせて読むと技術内容は理解できます。　
CAN、OSEK/VDX OS、DIAGは、ISO定義を先に確認しましょう。　　
OSEK COM、OSEK NMなどはISOの規定から基本的な部分で定義を変えています。
変更している部分を仕様等で明記するか、ISOを改定するとよいでしょう。　

AUTOSARの参考文献欄の改定が進んでいません。　
Glossary用語定義の網羅性が低いです。
本文を読む前に確認するとよいかもしれません。
本文を読んでから確認してもよいかもしれません。

AUTOSARが、2022年の版、R22-11公開しました。公開行事の模様は

AUTOSAR R22-11 Release Event 20221208

下記URL順次確認中です。

間違っていたら、いいね　を押していただいて、コメント欄にご報告くださると幸いです。
編集リクエストが、構造的な変更をしている最中に、構造的な編集リクエストをしていただくと、
何をどう直したらいいかわからなくなってしまいます。自動修復ツールがつくれていません。ごめんなさい。

文書は検索してダウンロードすることができます。
クラウドサービスにありがちな、あるのにないかのような検索結果が出ることがあります。

要求/仕様（Requirement and Specification)

一覧

AUTOSAR R22-11 Adaptive Platform 一覧はこちら。

Adaptive Platform Release Overview, No.782, AP, AUTOSAR 22-11 新

Foundation Release Overview, No.781, FO, AUTOSAR 22-11 新

Classic Platform Release Overview, AUTOSAR R22-11, CP, No.0(2)

AUTOSAR R22-11 マラソン

AUTOSAR 文書番号と発行年　

AUTOSAR 　R22-11で　リンク切れ、表示しない文書

Qiitaの記事の一覧は作成中です。

AUTOSAR R22-11 Qiita記事一覧　新

Abstract Platformとの関係

RS統合

<この項は書きかけです。順次追記します。>

文書変更(Document Change)

• Merged RS_SAF_21104 with RS_HM_09125 and RS_SAF_21105 with RS_HM_09222
• Added use case for RS_HM_09125 and RS_HM_09235
• Editorial changes

用語(terms)

Term	Description
CM	AUTOSAR Adaptive Communication Management
DM	AUTOSAR Adaptive Diagnostic Management
PHM	Platform Health Management
SE	Supervised Entity
SHM	System Health Monitor
Alive Counter	An independent data resource in context of a Checkpoint to track and handle its amount of Alive Indications.
Alive Indication	An indication of a Supervised Entity to signal its aliveness by calling a checkpoint used for Alive Supervision.
Alive Supervision	Mechanism to check the timing constraints of cyclic Supervised Entitys to be within the configured min and max limits.
Checkpoint	A point in the control flow of a Supervised Entity where the activity is reported.
Deadline End Checkpoint	A Checkpoint for which Deadline Supervision is configured and which is a ending point for a particular Transition. It is possible that a Checkpoint is both a Deadline Start Checkpoint and Deadline End Checkpoint - if Deadline Supervision is chained.
Deadline Start Checkpoint	A Checkpoint for which Deadline Supervision is configured and which is a starting point for a particular Transition.
Deadline Supervision	Mechanism to check that the timing constraints for execution of the transition from a Deadline Start Checkpoint to a corresponding Deadline End Checkpoint are within the configured min and max limits.
Expired Supervision Cycle	A Supervision Cycle where the Alive Supervision has failed its two escalation steps (Alive Counter fails the expected amount of Alive Indications (including tolerances) more often than the allowed amount of failed reference cycles).
Failed Supervision Reference Cycle	A Supervision Reference Cycle that ends with a detected deviation (including tolerances) between the Alive Counter and the expected amount of Alive Indications.
Global Supervision Status	Status that summarizes the Local Supervision Status of all Supervised Entities of a software subsystem.
Graph	A set of Checkpoints connected through Transitions, where at least one of Checkpoints is an Initial Checkpoint and there is a path (through Transitions) between any two Checkpoints of the Graph.
Health Channel Channel providing information about the health status of a (sub)system. This might be the Global Supervision Status of an application, the result any test routine or the status reported by a (sub)system (e.g. voltage monitoring, OS kernel, ECU status, ...).
Health Channel	Supervision Kind of supervision that checks if the health indicators registered by the supervised software are within the tolerances/limits.
Health Monitoring	Supervision of the software behaviour for correct timing and sequence.
Health Status	A set of states that are relevant to the supervised software (e.g. the Global Supervision Status of an application, a Voltage State, an application state, the result of a RAM monitoring algorithm).
Logical Supervision	Kind of online supervision of software that checks if the software (Supervised Entity or set of Supervised Entities) is executed in the sequence defined by the programmer (by the developed code).
Local Supervision Status	Status that represents the current result of Alive Supervision, Deadline Supervision and Logical Supervision of a single Supervised Entity.
Platform Health Management	Health Monitoring for the Adaptive Platform
Supervised Entity	A whole or part of a software component type which is included in the supervision. A Supervised Entity denotes a collection of Checkpoints within the corresponding software component type. A software component type can include zero, one or more Supervised Entities. A Supervised Entity may be instantiated multiple times, in which case each instance is independently supervised.
Supervised Entity Identifier	An Identifier that identifies uniquely a Supervised Entity within an Application.
Supervision Counter	An independent data resource in context of a Supervised Entity which is updated during each supervision cycle and which is used by the Alive Supervision algorithm to perform the check against counted Alive Indications.
Supervision Cycle	The time period in which the cyclic Alive Supervision is performed.
Supervision Mode	An overall state of a microcontroller or virtual machine or or state of a Function Group (in case of Adaptive Platform). Modes are mutually exclusive. A mode can be e.g. Startup, Shutdown, Lowpower.
Supervision Reference Cycle	The amount of Supervision Cycles to be used as reference by the Alive Supervision to perform the check of counted Alive Indications (individually for each Supervised Entity).
Local Health Monitor	Local Health Monitor gathers health information of the platform on which it is deployed.

英日

日本語は仮訳

T.B.D.

参考(reference)

[1] ISO 26262:2018 (all parts) – Road vehicles – Functional Safety, http://www.iso.org
[2] Specification of Health Monitoring, AUTOSAR_ASWS_HealthMonitoring
[3] Explanation of System Health Monitoring, AUTOSAR_EXP_SystemHealthMonitoring
[4] Standardization Template, AUTOSAR_TPS_StandardizationTemplate
[5] Glossary, AUTOSAR_TR_Glossary
https://www.autosar.org/fileadmin/standards/R22-11/FO/AUTOSAR_TR_Glossary.pdf
[6] Main Requirements, AUTOSAR_RS_Main

202304 URL更新

Requirements on Health Monitoring, No.878, FO, AUTOSAR R22-11, FO, 20230421

＜この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。＞

文書履歴(document history)

ver. 0.01 初稿 20230205
ver. 0.02 ありがとう追記　20230723

最後までおよみいただきありがとうございました。

いいね　💚、フォローをお願いします。

Thank you very much for reading to the last sentence.

Please press the like icon 💚　and follow me for your happy life.

You get articles that match your needs
You can efficiently read back useful information
You can use dark theme

What you can do with signing up