0
0

Delete article

Deleted articles cannot be recovered.

Draft of this article would be also deleted.

Are you sure you want to delete this article?

More than 1 year has passed since last update.

AUTOSAR CountdownAdvent Calendar 2022

Day 19

Specification of FlexRay State Manager, No.254, AUTOSAR R21-11(158) CP

Last updated at Posted at 2022-05-24

Specification of FlexRay State Manager, No.254, 2021-11

AUTOSAR R21-11記事一覧はこちら。

AUTOSAR 21-11, 140文書読んだ。2022年5月末に半分到達予定。

AUTOSAR R21-11(0) 仕様ダウンロード一覧。単語帳。参考文献資料作成

用語(terms)

Term Description
API Application Program Interface
AUTOSAR Automotive Open System Architecture
BSW Basic Software
CC Communication Controller
CHI Controller Host Interface
ComM AUTOSAR Communication Manager
DCM Diagnostic Communication Manager
Dem/DEM Diagnostic Event Manager
Det/DET Default Error Tracer
e.g. [lat.] exempli gratia = [eng.] for example
ECU Electronic Control Unit
EcuM ECU State Manager
Fr FlexRay Driver
FrIf FlexRay Interface (AUTOSAR BSW module)
FrSM FlexRay State Manager
FrTrcv FlexRay Transceiver Driver
i.e. [lat.] id est = [eng.] that is
Id/ID Identifier
N/A Not applicable
NM Network Management
PDU Protocol Data Unit
POC Protocol Operation Control
POCState Actual CC internal state of the POC. This state might differ from vPOC!State in certain cases, e.g. after FREEZE command invocation (see [11] for details).
RTE Runtime Environment
RX Reception
SchM Schedule Manager
SW Software
TX Transmission
UML Unified Modeling Language
vPOC Data structure provided from the CC to the host at the CHI, which contains the actual POC status of the CC.
vPOC!Freeze vPOC!Freeze denotes the Freeze bit that is part of the vPOC data structure. The Freeze bit is used by the CC to indicate that the HALT state has been entered due to an error condition.
vPOC!SlotMode vPOC!SlotMode denotes the SlotMode field that is part of the vPOC data structure.
WUP Wake-Up Pattern
XML Extensible markup language
Active wake-up Wake-up caused by the ECU e.g. by a sensor.
Passive wake-up Wakeup caused by another ECU and propagated (e.g. by bus or wakeup-line) to the ECU currently in focus.
Remote wake-up A passive wake-up received by the FlexRay bus or wakeup-line

英日

日本語は仮訳

T.B.D.

参考(reference)

[1] List of Basic Software Modules
AUTOSAR_TR_BSWModuleList.pdf
[2] Layered Software Architecture
AUTOSAR_EXP_LayeredSoftwareArchitecture.pdf
[3] General Requirements on Basic Software Modules
AUTOSAR_SRS_BSWGeneral-pdf
[4] Specification of ECU Configuration
AUTOSAR_TPS_ECUConfiguration.pdf
[5] Specification of Communication Stack Types
AUTOSAR_SWS_CommunicationStackTypes.pdf
[6] Requirements on FlexRay
AUTOSAR_SRS_FlexRay.pdf
[7] Specification of FlexRay Interface
AUTOSAR_SWS_FlexRayInterface.pdf
[8] Specification of FlexRay Driver
AUTOSAR_SWS_FlexRayDriver.pdf
[9] Specification of Communication Manager
AUTOSAR_SWS_ComManager.pdf
[10] Requirements on Mode Management
AUTOSAR_SRS_ModeManagement.pdf
[11] Basic Software Module Description Template,
AUTOSAR_TPS_BSWModuleDescriptionTemplate.pdf
[12] General Specification of Basic Software Modules
AUTOSAR_SWS_BSWGeneral.pdf
[13] FlexRay Communications System Protocol Specification Version 2.1 Rev A

0
0
0

Register as a new user and use Qiita more conveniently

  1. You get articles that match your needs
  2. You can efficiently read back useful information
  3. You can use dark theme
What you can do with signing up
0
0

Delete article

Deleted articles cannot be recovered.

Draft of this article would be also deleted.

Are you sure you want to delete this article?