2023年4月URL変更
この項は2023年4月21日、AUTOSARの文書のURLが変更になった。
/classic/22-11/
が
/R22-11/CP/
過去記事で、URLでエラーが出たら書き換えてみてください。

/adaptive/22-11/
は　
/R22-11/AP/

/foundation/22-11/
は　
/R22-11/FO/
です。

2023年11月URL変更

2023年11月にもAUTOSAR文書のURLが変更になっている。
/user_upload/standards/classic/21-11/
を
/standards/R21-11/CP/
などに書き換えてください。

/user_upload/standards/adaptive/21-11/
を
/standards/R21-11/AP/

/user_upload/standards/foundation/21-11/
を
/standards/R21-11/FO/

お手数をおかけします。
１年に２度URLを変更するなんて、新しい記事が書ける。とても嬉しい。

一覧

AUTOSAR R22-11 Qiita記事一覧 20230421 。

この記事の表題の最後に「20230421」を加えます。

<この項は書きかけです。順次追記します。>

AUTOSARが、2022年の版、R22-11を公開しました。

R21-11

R20-11

R19-11

https://www.autosar.org/fileadmin/standards/R19-11/CP/AUTOSAR_SWS_FlexRayTransceiverDriver.pdf
https://www.autosar.org/

文書は検索してダウンロードできます。

R20-11,R21-11, R22-11の３年分だけになりました。

公開行事の模様は

AUTOSAR R22-11 Release Event 20221208

AUTOSAR R22-11 Classic Platform 一覧はこちら。

Classic Platform Release Overview, AUTOSAR No.0 ,R22-11, CP, 20230421

要求仕様対応(Requirement and Specification)

Abstract Platformとの関係

通信規約種類ごとに統合し、Adaptive Platformでも利用できるようにする。

<この項は書きかけです。順次追記します。>

文書変更(Document Change)

No content changes

用語(terms)

Term	Description
µC	Microcontroller
Active Star(Network)	Star topology networks consist of one ore more active central nodes which rebroadcast(s) all transmissions received from a branch to all other branches on the network. All peripheral nodes may thus communicate with all others by transmitting to, and receiving from, the central node(s) if they are located on another branch. On detection of the failure of a branch the active star will isolate its peripheral nodes from all other branches resulting in fault confinement
API	Application Programming Interface
AUTOSAR	Automotive Open System Architecture
BD	Bus Driver
Branch	Element of an active star network topology sharing (i.e. electrically connected to) the same transmitter and receiver circuit on the physical layer. The failure of a branch will result in the isolation of its peripheral nodes by the active star from all other branches resulting in fault confinement.
BSW	Basic Software
CC	Communication Controller
ComM	Communication Manager, See [8] for details
DEM/Dem	Diagnostic Event Manager
DET/Det	Default Error Tracer
DIO/Dio	Digital input output, one of the SPAL SW modules
EB	Externally buffered channel. Buffers containing data to transfer are outside the SPI Handler/Driver.
ECU	Electronic Control Unit
EcuM	ECU State Manager, see [7] for details
EPL	Electrical Physical Layer
ERRN	ERRor output signal, Negated i.e. active LOW FlexRay Node A logical entity connected to the FlexRay Network that is capable of sending and/or receiving frames.
FrIf	FlexRay Interface
FrTrcv	FlexRay Transceiver
GPIO	General Purpose Input Output
I/O	Input/Output
IB	Internally buffered channel. Buffers containing data to transfer are inside the SPI Handler/Driver.
ID/Id	Identifier
ISR	Interrupt Service Routine
MCAL	Micro controller Abstraction Layer
MCG	Module Configuration Generator
MISRA	Motor Industry Software Reliability Association
n/a	Not applicable
OS	Operating System
Port	Port, one of the SPAL SW modules
RAM	Random Access Memory
RxD	Receive Data
RxEN	Receive Enable
SBC	System Basis Chip; A device, which integrates e.g. CAN and/or FlexRay and/or LIN transceiver, watchdog and power control.
SchM	Schedule Manager
SPAL	Standard Peripheral Abstraction Layer
SPI/Spi	Serial Peripheral Interface.
SPI/Spi Channel	A channel is a software exchange medium for data that are defined with the same criteria: configuration parameters, number of data elements with same size and data pointers (source & destination) or location. See specification of SPI driver for more details.
SPI/Spi Job	A job is composed of one or several channels with the same chip select. A job is considered to be atomic and therefore cannot be interrupted. A job has also an assigned priority. See specification of SPI driver for more details.
SPI/Spi Sequence	A sequence is a number of consecutive jobs to be transmitted. A sequence depends on a static configuration. See specification of SPI driver for more details.
SRS	Software Requirement Specification
SW	Software
SW-C	Software-Component
SWS	Software Specification
XML	eXtended Markup Language

英日単語帳

日本語は仮訳

T.B.D.

参考(reference)

[1] List of Basic Software Modules
AUTOSAR_TR_BSWModuleList.pdf
[2] Layered Software Architecture
AUTOSAR_EXP_LayeredSoftwareArchitecture.pdf
[3] Specification of ECU Configuration
AUTOSAR_TPS_ECUConfiguration.pdf
[4] General Requirements on Basic Software
AUTOSAR_SRS_BSWGeneral.pdf
[5] FlexRay_ EPL-Specification_ V2.1_Rev_D2_N010
http://www.flexray.com/
FlexRay_ EPL-Specification_ V2.1_Rev_D2_N010.pdf
[6] FlexRay_ EPL-Application Notes_ V2.1_Rev_D_N009
http://www.flexray.com/
FlexRay_ EPL-Application Notes_ V2.1_Rev_D_N009.pdf
[7] Specification of ECU State Manager
AUTOSAR_SWS_ECUStateManager.pdf
[8] Specification of Communication Manager
AUTOSAR_SWS_COMManager.pdf
[9] Specification of DIO Driver
AUTOSAR_SWS_DIODriver.pdf
[11] Specification of SPI Handler/Driver
AUTOSAR_SWS_SPIHandlerDriver.pdf
[12] Requirements on FlexRay
AUTOSAR_SRS_FlexRay.pdf
[13] Specification of Communication Stack Types
AUTOSAR_SWS_CommunicationStackTypes.pdf
[14] Specification of Basic Software Scheduler
AUTOSAR_SWS_BSW_Scheduler.pdf
[15] Specification of Memory Mapping
AUTOSAR_SWS_MemoryMapping.pdf
[16] Basic Software Module Description Template
AUTOSAR_TPS_BSWModuleDescriptionTemplate.pdf
[17] General Specification of Basic Software Modules
AUTOSAR_SWS_BSWGeneral.pdf

Glossary も　参考に入れましょう。
https://www.autosar.org/fileadmin/standards/R22-11/FO/AUTOSAR_TR_Glossary.pdf

関連文書(Related document)

Basic principles, ボッシュ自動車handbook(英語)11版まとめ<2>

JAXA/IPA クリティカルソフトウェアワークショップ WOCS言語関連発表(改定版)

CAN(controller area network)

「はじめてのCAN/CANFD 」ベクタージャパン＜エンジニア夏休み企画>【読書感想文】

三方良し　Udemy 車載LAN入門講座 CAN通信編

詳解車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(1) 著者　＜エンジニア夏休み企画読書感想文＞

詳解車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(2)参考文献＜エンジニア夏休み企画>【読書感想文】

詳解車載ネットワーク CAN、CAN FD、LIN、CXPI、Ethernetの仕組みと設計のために

R23-11

＜この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。＞

文書履歴(document history)

ver. 0.01初稿　　20230527

最後までおよみいただきありがとうございました。

いいね　💚、フォローをお願いします。

Thank you very much for reading to the last sentence.

Please press the like icon 💚　and follow me for your happy life.