AUTOSARは自動車用OSの業界団体規格です。　
業務で利用する場合には、会員になることを条件にしています。

2002年から20年経ち、当初の狙いの段階に近づいてきました。

MATLABでモデルさえ記述すれば、あとは自動生成だけでソフトが完成するところまで、あと一歩です。
Ethernet, UNIXが生まれて20年で大衆化したのと同じように考えると分かりやすいでしょう。　

AUTOSARの上で動く、クラウド対応のミドルウェアが出て、開発も運用もクラウドになれば、一気にAUTOSARは大衆化するでしょう。

AUTOSAR Abstract Platformへの道 R22-11

2023年4月URL変更

この項は2023年4月21日、AUTOSARの文書のURLが変更になった。
/classic/22-11/
が
/R22-11/CP/
過去記事で、URLでエラーが出たら書き換えてみてください。

/adaptive/22-11/
は　
/R22-11/AP/

/foundation/22-11/
は　
/R22-11/FO/
です。

2023年11月URL変更

2023年11月にもAUTOSAR文書のURLが変更になっている。
/user_upload/standards/classic/21-11/
を
/standards/R21-11/CP/
などに書き換えてください。

/user_upload/standards/adaptive/21-11/
を
/standards/R21-11/AP/

/user_upload/standards/foundation/21-11/
を
/standards/R21-11/FO/

お手数をおかけします。
１年に２度URLを変更するなんて、新しい記事が書ける。とても嬉しい。

一覧

AUTOSAR R22-11 Qiita記事一覧 20230421 。

この記事の表題の最後に「20230421」を加えます。

<この項は書きかけです。順次追記します。>

AUTOSARが、2022年の版、R22-11を公開しました。

R21-11

R20-11

R19-11

文書は検索してダウンロードできます。

R20-11,R21-11, R22-11の３年分だけになりました。

公開行事の模様は

AUTOSAR R22-11 Release Event 20221208

Classic Platform Release Overview, AUTOSAR No.0 ,R22-11, CP, 20230421

Foundation Release Overview, AUTOSAR, 781, R22-11, FO, 20230421

Adaptive Platform Release Overview, AUTOSAR 782, R22-11, AP, 20230421

要求仕様対応(Requirement and Specification)

Abstract Platformとの関係

状態管理統一。

<この項は書きかけです。順次追記します。>

文書変更(Document Change)

• Added explanatory content for rework of PNC related ComM and NM handling
• Editorial Changes

用語(terms)

Term	Description
mode	A Mode is a certain set of states of the various state machines (not only of the ECU State Manager) that are running in the vehicle and are relevant to a particular entity, an application or the whole vehicle
state	States are internal to their respective BSW component and thus not visible to the application. So they are only used by the BSW’s internal state machine. The States inside the ECU State Manager build the phases and therefore handle the modes.
phase	A logical or temporal assembly of ECU Manager’s actions and events, e.g. STARTUP, UP, SHUTDOWN, SLEEP, etc. Phases can consist of Sub-Phases which are often called Sequences if they above all exist to group sequences of executed actions into logical units. Phases in this context are not the phases of the AUTOSAR Methodology.
mode switch port	The port for receiving (or sending) a mode switch notification. For this purpose, a mode switch portis typed by a ModeSwitchInterface.
mode request interface	A AUTOSAR SenderReceiverInterfaces, which carries the requested mode in a VariableDataPrototype..
mode user	An AUTOSAR SW-C or AUTOSAR Basic Software Module that depends on modes by SwcModeSwitchEvent, BswModeSwitchEvent, or simply by reading the current state of a mode is called a mode user. A mode user is defined by having a require mode switch port or a requiredModeGroup ModeDeclarationGroupPrototype. See also section 2.
mode manager	Entering and leaving modes is initiated by a mode manager. A mode manager is defined by having a provide mode switch port or a providedModeGroup ModeDeclarationGroupPrototype. A mode manager might be either an application mode manager or a Basic Software Module that provides a service including mode switches, like the ECU State Manager. See also section 2.2.
application mode manager	An application mode manager is a AUTOSAR softwarecomponent that provides the service of switching modes. The modes of a application mode manager do not have to be standardized.
mode request	The communication of a mode request from the mode user to the mode manager using either the SenderReceiverInterface is called a mode request.
mode switch notification	The communication of a mode switch from the mode manager to the mode user using either the ModeSwitchInterface or providedModeGroup and requiredModeGroup ModeDeclarationGroupPrototype is called mode switch notification.
mode machine instance	The instances of mode machines or ModeDeclarationGroups are defined by the ModeDeclarationGroupPrototypes of the mode manager Since a mode switch is not executed instantaneously, the RTE or Basic Software Scheduler has to maintain it’s own states. For each mode managers ModeDeclarationGroupPrototype, RTE or Basic Software Scheduler has one state machine. This state machine is called mode machine instance. For all mode users of the same mode managers ModeDeclarationGroupPrototype RTE and Basic Software Scheduler uses the same mode machine instance. See also section 2.2.
common mode machine instance	A “common mode machine instance” is a special “mode machine instance” shared by BSW Modules and SW-Cs: The RTE Generator creates only one mode machine instance if a ModeDeclarationGroupPrototype instantiated in a port of a softwarecomponent is synchronized synchronizedModeGroup of a
Mode Disabling Dependency	An RTEEvent and BswEvent that starts a RunnableEntity respectively a Basic Software Schedulable Entity can contain a disabledMode or disabledInMode association which references a ModeDeclaration. This association is called ModeDisablingDependency in this document.
mode disabling	dependent ExecutableEntity A mode disabling dependent RunnableEntity or a Basic Software Schedulable Entity is triggered by an RTEEvent respectively a BswEvent with a ModeDisablingDependency. RTE and Basic Software Scheduler prevent the start of those RunnableEntity or Basic Software Schedulable Entity by the RTEEvent / BswEvent, when the corresponding mode disabling is active. See also section 2.2.
mode disabling	When a ‘mode disabling’ is active, RTE and Basic Software Scheduler disables the start of mode disabling dependent ExecutableEntitys. The ‘mode disabling’ is active during the mode that is referenced in the mode disabling dependency and during the transitions that enter and leave this mode. See also section 2.2.
OnEntry ExecutableEntity	A RunnableEntity or a Basic Software Schedulable Entity that is triggered by a SwcModeSwitchEvent respectively a BswModeSwitchEvent with ModeActivationKind ‘entry’ is triggered on entering the mode. It is called OnEntry ExecutableEntity. See also section 2.2.
OnExit ExecutableEntity	A RunnableEntity or a Basic Software Schedulable Entity that is triggered by a SwcModeSwitchEvent respectively a BswModeSwitchEvent with ModeActivationKind ‘exit’ is triggered on exiting the mode. It is called OnExit ExecutableEntity. See also section 2.2.
OnTransition ExecutableEntity	A RunnableEntity or a Basic Software Schedulable Entity that is triggered by a SwcModeSwitchEvent respectively a BswModeSwitchEvent with ModeActivationKind ‘transition’ is triggered on a transition between the two specified modes. It is called OnTransition ExecutableEntity. See also section 2.2.
mode switch acknowledge ExecutableEntity	A RunnableEntity or a Basic Software Schedulable Entity that is triggered by a SwcModeSwitchEvent respectively a BswModeSwitchedAckEvent connected to the mode manager’s ModeDeclarationGroupPrototype. It is called mode switch acknowledge ExecutableEntity. See also section 2.2.
server runnable	A server that is triggered by an OperationInvokedEvent. It has a mixed behavior between a runnable and a function call. In certain situations, RTE can implement the client server communication as a simple function call.
runnable activation	The activation of a runnable is linked to the RTEEvent that leads to the execution of the runnable. It is defined as the incident that is referred to by the RTEEvent. E.g., for a timing event, the corresponding runnable is activated, when the timer expires, and for a data received event, the runnable is activated when the data is received by the RTE.
Basic Software Schedulable Entity activation	The activation of a Basic Software Schedulable Entity is defined as the activation of the task that contains the Basic Software Schedulable Entity and eventually includes setting a flag that tells the glue code in the task which Basic Software Schedulable Entity is to be executed.
Runnable start	A runnable is started by the calling the C-function that implements the runnable from within a started task.
Basic Software Schedulable Entity start	A Basic Software Schedulable Entity is started by the calling the C-function that implements the Basic Software Schedulable Entity from within a started task.
Trigger Source	A Trigger Source administrate the particular Trigger and informs the RTE or Basic Software Scheduler if the Trigger is raised. A Trigger Source has dedicated provide trigger ports or / and releasedTrigger Triggers to communicate to the Trigger Sinks.
Trigger Sink	A Trigger Sink relies on the activation of Runnable Entities or Basic Software Schedulable Entities if a particular Trigger is raised. A Trigger Sink has a dedicated require trigger ports or / and requiredTrigger Triggers to communicate to the Trigger Sources.
Trigger port	A PortPrototype which is typed by an TriggerInterface
triggered ExecutableEntity	A Runnable Entity or a Basic Software Schedulable Entity that is triggered at least by one ExternalTriggerOccurredEvent / BswExternalTriggerOccurredEvent or InternalTriggerOccurredEvent / BswInternalTriggerOccurredEvent. In particular cases, the Trigger Event Communication or the Inter Runnable Triggering is implemented by RTE or Basic Software Scheduler as a direct function call of the triggered ExecutableEntity by the triggering ExecutableEntity.
triggered runnable	A Runnable Entity that is triggered at least by one ExternalTriggerOccurredEvent or InternalTriggerOccurredEvent. In particular cases, the Trigger Event Communication or the Inter Runnable Triggering is implemented by RTE as a direct function call of the triggered runnable by the triggering runnable.
triggered Basic Software Schedulable Entity	A Basic Software Schedulable Entity that is triggered at least by one BswExternalTriggerOccurredEvent or BswInternalTriggerOccurredEvent. In particular cases, the Trigger Event Communication or the Inter Basic Software Schedulable Entity Triggering is implemented by Basic Software Scheduler as a direct function call of the triggered ExecutableEntity by the triggering ExecutableEntity.
execution-instance	An execution-instance of a ExecutableEntity is one instance or call context of an ExecutableEntity with respect to concurrent execution.
inter-ECU communication	The communication between ECUs, typically using COM is called inter-ECUcommunication in this document.
inter-partition communication	The communication within one ECU but between different partitions, represented by different OS applications, is called inter-partition communication in this document. It typically involves the use of OS mechanisms like IOC or trusted function calls. The partitions can be located on different cores or use different memory sections of the ECU.
intra-partition communication	The communication within one partition of one ECU is called intra-partition communication. In this case, RTE can make use of internal buffers and queues for communication.
intra-ECU communication	The communication within one ECU is called intra-ECU communication in this document. It is a super set of inter-partition communication and intra-partition communication.

英日

日本語は仮訳

T.B.D.

参考(reference)

[1] Software Component Template
AUTOSAR_TPS_SoftwareComponentTemplate
[2] Meta Model
AUTOSAR_MMOD_MetaModel
[3] Basic Software Module Description Template
AUTOSAR_TPS_BSWModuleDescriptionTemplate
[4] Specification of Basic Software Mode Manager
AUTOSAR_SWS_BSWModeManager
[5] Specification of Diagnostic Communication Manager
AUTOSAR_SWS_DiagnosticCommunicationManager
[6] Glossary, AUTOSAR_TR_Glossary
https://www.autosar.org/fileadmin/standards/R22-11/FO/AUTOSAR_TR_Glossary.pdf

関連文書(Related document)

AUTOSAR Abstract Platformへの道 R22-11

自動車　記事　１００

Basic principles, ボッシュ自動車handbook(英語)11版まとめ<2>

JAXA/IPA クリティカルソフトウェアワークショップ WOCS言語関連発表(改定版)

CAN(controller area network)

「はじめてのCAN/CANFD 」ベクタージャパン＜エンジニア夏休み企画>【読書感想文】

三方良し　Udemy 車載LAN入門講座 CAN通信編

詳解車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(1) 著者　＜エンジニア夏休み企画読書感想文＞

詳解車載ネットワーク CAN, CAN FD, LIN, CXPI, Ethernetの仕組みと設計のために(2)参考文献＜エンジニア夏休み企画>【読書感想文】

詳解車載ネットワーク CAN、CAN FD、LIN、CXPI、Ethernetの仕組みと設計のために

＜この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。＞

文書履歴(document history)

ver. 0.01初稿　　20230701

最後までおよみいただきありがとうございました。

いいね　💚、フォローをお願いします。

Thank you very much for reading to the last sentence.

Please press the like icon 💚　and follow me for your happy life.