用語(terms)

Term	Description
AC	J1939 AddressClaimed PG (PGN = 0x0EE00)
ACK	J1939 Acknowledgement PG (ACKM) with control byte set to 0
ACKM	J1939 Acknowledgement PG (PGN = 0x0E800)
BSW	Basic Software (module)
CA	Controller Application, role of an ECU tied to one address
CDD	Complex Driver, any software that interfaces directly with AUTOSAR BSW, but is not defined by AUTOSAR
DA	Destination address, the address of the receiver of a PG.
DET	Default Error Tracer, supports development and runtime error reporting
DP	Data Page, the most significant bit (MSB) of the 18 bit PGN
EDP	Extended Data Page, the second bit (after MSB) of the 18 bit PGN
Extended Identifier Bytes	These bytes represent multiplexor values in a multiplexed message which is requested via RQST2
J1939Rm	SAE J1939 Request Manager
MetaData	Meta data transferred alongside a PDU
NACK	J1939 Acknowledgement PG (ACKM) with control byte set to 1
PDU	Protocol Data Unit, a message transferred between the layers of the AUTOSAR stack, also known as I-PDU
PDU1	J1939 PDU Type 1, this kind of PDUs can be sent to a specific destination address
PDU2	J1939 PDU Type 2, this kind of PDUs is always sent to the whole network
PDUF	PDU Format, the middle byte of the 18 bit PGN
PDUS	PDU Specific, the lower byte of the 18 bit PGN
PG	Parameter Group
PGN	Parameter Group Number (18 bits, contains EDP, DP, PDUF, PDUS)
RQST	J1939 Request PG (PGN = 0x0EA00)
RQST2	J1939 Request2 PG (PGN = 0x0C900)
RTE	AUTOSAR Runtime Environment
SA
SW-	C AUTOSAR Software Component (of the Application)
XFER	J1939 Transfer PG (PGN = 0x0CA00)

英日単語帳

日本語は仮訳

T.B.D.

参考(reference)

[1] Specification of a Transport Layer for SAE J1939
AUTOSAR_SWS_SAEJ1939TransportLayer
[2] SAE J1939-21 Data Link Layer
[3] Glossary, AUTOSAR_TR_Glossary
https://www.autosar.org/fileadmin/standards/foundation/21-11/AUTOSAR_TR_Glossary.pdf
[4] General Specification of Basic Software Modules
AUTOSAR_SWS_BSWGeneral
[5] Layered Software Architecture
AUTOSAR_EXP_LayeredSoftwareArchitecture
[6] Specification of Communication
AUTOSAR_SWS_COM
[7] Specification of PDU Router
AUTOSAR_SWS_PDURouter
[8] Specification of Network Management for SAE J1939
AUTOSAR_SWS_SAEJ1939NetworkManagement
[9] Specification of a Diagnostic Communication Manager for SAE J1939
AUTOSAR_SWS_SAEJ1939DiagnosticCommunicationManager
[10] Specification of Default Error Tracer
AUTOSAR_SWS_DefaultErrorTracer
[11] Specification of RTE Software
AUTOSAR_SWS_RTE
[12] Complex Driver design and integration guideline
AUTOSAR_EXP_CDDDesignAndIntegrationGuideline
[13] Specification of ECU Configuration
AUTOSAR_TPS_ECUConfiguration
[14] Specification of CAN Interface
AUTOSAR_SWS_CANInterface
[15] Specification of Communication Manager
AUTOSAR_SWS_COMManager
[16] Requirements on BSW Modules for SAE J1939
AUTOSAR_SRS_SAEJ1939
[17] General Requirements on Basic Software Modules
AUTOSAR_SRS_BSWGeneral
[18] Specification of Communication Stack Types
AUTOSAR_SWS_CommunicationStackTypes
[19] Specification of Standard Types
AUTOSAR_SWS_StandardTypes
[20] List of Basic Software Modules
AUTOSAR_TR_BSWModuleList
[21] System Template
AUTOSAR_TPS_SystemTemplate