0
0

Delete article

Deleted articles cannot be recovered.

Draft of this article would be also deleted.

Are you sure you want to delete this article?

More than 1 year has passed since last update.

AUTOSAR CountdownAdvent Calendar 2022

Day 11

Specification of CAN Interface, AUTOSAR 22-11, CP, No.12

Last updated at Posted at 2022-12-10

AUTOSAR Countdown Calendar 2022

2022/12/09日の投稿です。

AUTOSARが、今年の版、R22-11公開しました。公開行事の模様は

AUTOSAR R22-11 Release Event 20221208

下記は想定URLです。順次確認中です。

間違っていたら、いいね を押していただいて、コメント欄にご報告くださると幸いです。
編集リクエストが、構造的な変更をしている最中に、構造的な編集リクエストをしていただくと、
何をどう直したらいいかわからなくなってしまいます。自動修復ツールがつくれていません。ごめんなさい。

文書は検索してダウンロードすることができます。
クラウドサービスにありがちな、あるのにないかのような検索結果が出ることがあります。

AUTOSAR R22-11 Qiita 記事一覧はこちらに編集中です。

<この項は書きかけです。順次追記します。>

用語(terms)

Term Description
CAN L-PDU CAN Protocol Data Unit. Consists of an identifier, Data Length and data (SDU) Visible to the CAN driver.
CAN L-SDU CAN Service Data Unit. Data that are transported inside the CAN L-PDU. Visible to the upper layers of the CAN interface (e.g. PDU Router).
CanDrv CAN Driver module
CAN FD CAN with Flexible Data-Rate
CanId CAN Identifier
CanIf CAN Interface module
CanNm CAN Network Management module
CanSm CAN State Manager module
CanTp CAN Transport Layer module
CanTrcv CAN Transceiver Driver module
CanTSyn Global Time Synchronization over CAN
ComM Communication Manager module
DCM Diagnostic Communication Manager module
EcuM ECU State Manager module
HOH CAN hardware object handle
HRH CAN hardware receive handle
HTH CAN hardware transmit handle
J1939Nm J1939 Network Management module
J1939Tp J1939 Transport Layer module
PduR PDU Router module
PN Partial Networking
SchM Scheduler Module
Buffer Fixed sized memory area for a single data unit (e.g. CAN ID, Data Length, SDU, etc.) is stored at a dedicated memory address in RAM.
CAN communication matrix Describes the complete CAN network: • Participating nodes • Definition of all CAN PDUs (Identifier, Data Length) • Source and Sinks for PDUs
CAN Controller A CAN Controller is a CPU on-chip or external standalone hardware device. One CAN Controller is connected to one physical channel.
CAN Device Driver Generic term of CAN Driver and CAN Transceiver Driver.
CAN Hardware Unit A CAN Hardware Unit may consist of one or multiple CAN Controllers of the same type and one, two or multiple CAN RAM areas. The CAN Hardware Unit is located on-chip or as external device. The CAN hardware unit is represented by one CAN Driver.
CanIf Controller mode state machine This is not really a state machine, which may be influenced by transmission requests. This is an image of the current abstracted state of an appropriate CAN Controller. The state transitions can only be realized by upper layer modules like the CanSm or by external events like e.g. if a BusOff occurred.
CanIf Receive L-PDU / CanIf Rx L-PDU L-PDU of which the direction is set to "lower to upper layer".
CanIf Receive L-PDU buffer / CanIfRxBuffer Single element RAM buffer located in the CAN Interface module to store whole receive L-PDUs.
CanIf Transmit L-PDU / CanIf Tx L-PDU L-PDU of which the direction is set to "upper to lower layer".
CanIf Transmit L-PDU buffer / CanIfTxBuffer Single CanIfTxBuffer element located in the CanIf to store one or multiple CanIf Tx L-PDUs. If the buffersize of a single CanIfTxBuffer element is set to 0, a CanIfTxBuffer element is only used to refer a HTH.
Hardware object / HW object A CAN hardware object is defined as a PDU buffer inside the CAN RAM of the CAN Hardware Unit / CAN Controller.
Hardware Receive Handle(HRH) The Hardware Receive Handle (HRH) is defined and provided by the CAN Driver. Each HRH typically represents just one hardware object. The HRH is used as a parameter by the CAN Interface Layer for i.e. software filtering.
Hardware Transmit Handle(HTH) The Hardware Transmit Handle (HTH) is defined and provided by the CAN Driver. Each HTH typically represents just one or multiple CAN hardware objects that are configured as CAN hardware transmit buffer pool.
Inner priority inversion Transmission of a high-priority L-PDU is prevented by the presence of a pending low-priority L-PDU in the same transmit hardware object.
Integration Code Code that the Integrator needs to add to an AUTOSAR System, to adapt non-standardized functionalities. Examples are Callouts of the ECU State Manager and Callbacks of various other BSW modules. The I/O Hardware Abstraction is called Integration Code, too.
Lowest In - First Out / LOFO This is a data storage procedure, whereas always the elements with the lowest values will be extracted.
L-PDU channel group Group of CAN L-PDUs, which belong to just one underlying network. Usually they are handled by one upper layer module.
Outer priority inversion A time gap occurs between two consecutive transmit L-PDUs. In this case a lower priority L-PDU from another node can prevent sending the own higher priority L-PDU. Here the higher priority LPDU cannot participate in arbitration during network access because the lower priority L-PDU already won the arbitration.
Physical channel A physical channel represents an interface from a CAN Controller to the CAN Network. Different physical channels of the CAN Hardware Unit may access different networks.
Tx request Transmit request to the CAN Interface module from a upper layer module of the CanIf

英日単語帳

日本語は仮訳

T.B.D.

参考(reference)

[1] Specification of CAN Driver
AUTOSAR_SWS_CANDriver
[2] Specification of CAN Transceiver Driver
AUTOSAR_SWS_CANTransceiverDriver
[3] Specification of CAN State Manager
AUTOSAR_SWS_CANStateManager
[4] Specification of CAN Network Management
AUTOSAR_SWS_CANNetworkManagement
[5] Specification of CAN Transport Layer
AUTOSAR_SWS_CANTransportLayer
[6] Specification of PDU Router
AUTOSAR_SWS_PDURouter
[7] Layered Software Architecture
AUTOSAR_EXP_LayeredSoftwareArchitecture
[8] Glossary,
https://www.autosar.org/fileadmin/standards/classic/22-11/AUTOSAR_TR_glossary.pdf
[9] General Specification of Basic Software Modules
AUTOSAR_SWS_BSWGeneral
[10] General Requirements on Basic Software Modules
AUTOSAR_SRS_BSWGeneral
[11] Requirements on CAN
AUTOSAR_SRS_CAN
[12] ISO 11898-1:2015 – Road vehicles – Controller area network (CAN)
[13] Specification of ECU State Manager
AUTOSAR_SWS_ECUStateManager
[14] Specification of ECU Configuration
AUTOSAR_TPS_ECUConfiguration

Countdown Calendar 2022

今年企画した6つのCountdown Calendarと、それぞれの記事一つをご紹介します。

AUTOSAR Countdown Calendar 2022

AUTOSAR References to ISO, IEC, ITU, IEEE, RFC and SEA etc.

Automotive Handbook Countdown Calendar 2022

Basic principles, ボッシュ自動車handbook(英語)11版まとめ<2>

2022 いいねをいただいた記事ランキング(O.K.版) Countdown Calendar 2022

2022年1月下旬 いいねをいただいた記事 16

CDCale(O.K.) Countdown Calendar 2022

「会議は15分未満」に。小耳にはさんだ話。

ABC language (O.K.版) Advent Calendar 2022

LLVMソースコードのコンパイルをしようと思ってハマった罠とそこから脱出するための努力

ABC maker(O.K版) Advent Calendar 2022

JAXA/IPA クリティカルソフトウェアワークショップ WOCS言語関連発表(改定版)

年末100記事を30点に仕上げる。

2023 書き初め

CountdownCalendar2022 報告

<この記事は個人の過去の経験に基づく個人の感想です。現在所属する組織、業務とは関係がありません。>

文書履歴(document history)

ver. 0.01 初稿 20221209
ver. 0.02 URL修正 20221222

0
0
0

Register as a new user and use Qiita more conveniently

  1. You get articles that match your needs
  2. You can efficiently read back useful information
  3. You can use dark theme
What you can do with signing up
0
0

Delete article

Deleted articles cannot be recovered.

Draft of this article would be also deleted.

Are you sure you want to delete this article?