Adafruit_SSD1306のミニ化のテスト1(SPIなし)

xインクルドファイルのわかる人むけ

目的
俺の考えた最強のhhを作る

OLED_SSD1306_BITMAP_TEST_DV33_UNO




//OLED_SSD1331_BITMAP_TEST1_UNO


//ヘッダーファイル
#include <Wire.h>
#include <Adafruit_GFX.h>
//#include <Adafruit_SSD1306.h>
#include "hh.h"

//定義
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET     -1 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
hh_Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET, 400000UL, 100000UL);


// ビットマップデータ
uint8_t databytes[8] = 

{

0b01100110,
0b10101111,
0b10111111,
0b11011111,

0b01111110,
0b01111110,
0b00111100,
0b00011000

};


//初期化
void setup() {

  // I2Cアドレスは使用するディスプレイに合わせて変更する
  display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);

}//setup


//メインループ
void loop() {

  // 画面表示をクリア
  display.clearDisplay();

  //ビットマップの表示
  display.drawBitmap(0, 0, databytes, 8, 8,  WHITE);

  // 描画バッファの内容を画面に表示
  display.display();

  delay(1000); //1秒待つ

}//loop

hh.cpp





#ifdef __AVR__
#include <avr/pgmspace.h>
#elif defined(ESP8266) || defined(ESP32) || defined(ARDUINO_ARCH_RP2040)
#include <pgmspace.h>
#else
#define pgm_read_byte(addr)                                                    \
  (*(const unsigned char *)(addr)) ///< PROGMEM workaround for non-AVR
#endif

#if !defined(__ARM_ARCH) && !defined(ENERGIA) && !defined(ESP8266) &&          \
    !defined(ESP32) && !defined(__arc__)
#include <util/delay.h>
#endif

//#include "Adafruit_SSD1306.h"
#include "hh.h"
#include <Adafruit_GFX.h>

// SOME DEFINES AND STATIC VARIABLES USED INTERNALLY -----------------------

#if defined(I2C_BUFFER_LENGTH)
#define WIRE_MAX min(256, I2C_BUFFER_LENGTH) ///< Particle or similar Wire lib
#elif defined(BUFFER_LENGTH)
#define WIRE_MAX min(256, BUFFER_LENGTH) ///< AVR or similar Wire lib
#elif defined(SERIAL_BUFFER_SIZE)
#define WIRE_MAX                                                               \
  min(255, SERIAL_BUFFER_SIZE - 1) ///< Newer Wire uses RingBuffer
#else
#define WIRE_MAX 32 ///< Use common Arduino core default
#endif

#define ssd1306_swap(a, b)                                                     \
  (((a) ^= (b)), ((b) ^= (a)), ((a) ^= (b))) ///< No-temp-var swap operation

#if ARDUINO >= 100
#define WIRE_WRITE wire->write ///< Wire write function in recent Arduino lib
#else
#define WIRE_WRITE wire->send ///< Wire write function in older Arduino lib
#endif

#ifdef HAVE_PORTREG
#define SSD1306_SELECT *csPort &= ~csPinMask;       ///< Device select
#define SSD1306_DESELECT *csPort |= csPinMask;      ///< Device deselect
#define SSD1306_MODE_COMMAND *dcPort &= ~dcPinMask; ///< Command mode
#define SSD1306_MODE_DATA *dcPort |= dcPinMask;     ///< Data mode
#else
#define SSD1306_SELECT digitalWrite(csPin, LOW);       ///< Device select
#define SSD1306_DESELECT digitalWrite(csPin, HIGH);    ///< Device deselect
#define SSD1306_MODE_COMMAND digitalWrite(dcPin, LOW); ///< Command mode
#define SSD1306_MODE_DATA digitalWrite(dcPin, HIGH);   ///< Data mode
#endif

#if (ARDUINO >= 157) && !defined(ARDUINO_STM32_FEATHER)
#define SETWIRECLOCK wire->setClock(wireClk)    ///< Set before I2C transfer
#define RESWIRECLOCK wire->setClock(restoreClk) ///< Restore after I2C xfer
#else // setClock() is not present in older Arduino Wire lib (or WICED)
#define SETWIRECLOCK ///< Dummy stand-in define
#define RESWIRECLOCK ///< keeps compiler happy
#endif

#if defined(SPI_HAS_TRANSACTION)
#define SPI_TRANSACTION_START spi->beginTransaction(spiSettings) ///< Pre-SPI
#define SPI_TRANSACTION_END spi->endTransaction()                ///< Post-SPI
#else // SPI transactions likewise not present in older Arduino SPI lib
#define SPI_TRANSACTION_START ///< Dummy stand-in define
#define SPI_TRANSACTION_END   ///< keeps compiler happy
#endif



// Check first if Wire, then hardware SPI, then soft SPI:
#define TRANSACTION_START   if(wire){SETWIRECLOCK;}
#define TRANSACTION_END     if(wire){RESWIRECLOCK;}


hh_Adafruit_SSD1306::hh_Adafruit_SSD1306(uint8_t w, uint8_t h, TwoWire *twi,
                                   int8_t rst_pin, uint32_t clkDuring,
                                   uint32_t clkAfter)
    : Adafruit_GFX(w, h), spi(NULL), wire(twi ? twi : &Wire), buffer(NULL),
      mosiPin(-1), clkPin(-1), dcPin(-1), csPin(-1), rstPin(rst_pin)
#if ARDUINO >= 157
      ,
      wireClk(clkDuring), restoreClk(clkAfter)
#endif
{
}





hh_Adafruit_SSD1306::~hh_Adafruit_SSD1306(void) {
  if (buffer) {
    free(buffer);
    buffer = NULL;
  }
}




void hh_Adafruit_SSD1306::ssd1306_command1(uint8_t c) {

    wire->beginTransmission(i2caddr);
    WIRE_WRITE((uint8_t)0x00); // Co = 0, D/C = 0
    WIRE_WRITE(c);
    wire->endTransmission();

}//ssd1306_command1


void hh_Adafruit_SSD1306::ssd1306_commandList(const uint8_t *c, uint8_t n) {

    wire->beginTransmission(i2caddr);
    WIRE_WRITE((uint8_t)0x00); // Co = 0, D/C = 0
    uint16_t bytesOut = 1;
    while (n--) {
      if (bytesOut >= WIRE_MAX) {
        wire->endTransmission();
        wire->beginTransmission(i2caddr);
        WIRE_WRITE((uint8_t)0x00); // Co = 0, D/C = 0
        bytesOut = 1;
      }
      WIRE_WRITE(pgm_read_byte(c++));
      bytesOut++;
    }
    wire->endTransmission();

}//ssd1306_commandList


void hh_Adafruit_SSD1306::ssd1306_command(uint8_t c) {
  TRANSACTION_START
  ssd1306_command1(c);
  TRANSACTION_END
}


bool hh_Adafruit_SSD1306::begin(uint8_t vcs, uint8_t addr, bool reset,
                             bool periphBegin) {

  if ((!buffer) && !(buffer = (uint8_t *)malloc(WIDTH * ((HEIGHT + 7) / 8))))
    return false;

  clearDisplay();



  vccstate = vcs;

  // Setup pin directions

    // If I2C address is unspecified, use default
    // (0x3C for 32-pixel-tall displays, 0x3D for all others).
    i2caddr = addr ? addr : ((HEIGHT == 32) ? 0x3C : 0x3D);
    // TwoWire begin() function might be already performed by the calling
    // function if it has unusual circumstances (e.g. TWI variants that
    // can accept different SDA/SCL pins, or if two SSD1306 instances
    // with different addresses -- only a single begin() is needed).
    if (periphBegin)
      wire->begin();

  



  // Reset SSD1306 if requested and reset pin specified in constructor
  if (reset && (rstPin >= 0)) {
    pinMode(rstPin, OUTPUT);
    digitalWrite(rstPin, HIGH);
    delay(1);                   // VDD goes high at start, pause for 1 ms
    digitalWrite(rstPin, LOW);  // Bring reset low
    delay(10);                  // Wait 10 ms
    digitalWrite(rstPin, HIGH); // Bring out of reset
  }

  TRANSACTION_START

  // Init sequence
  static const uint8_t PROGMEM init1[] = {SSD1306_DISPLAYOFF,         // 0xAE
                                          SSD1306_SETDISPLAYCLOCKDIV, // 0xD5
                                          0x80, // the suggested ratio 0x80
                                          SSD1306_SETMULTIPLEX}; // 0xA8
  ssd1306_commandList(init1, sizeof(init1));
  ssd1306_command1(HEIGHT - 1);

  static const uint8_t PROGMEM init2[] = {SSD1306_SETDISPLAYOFFSET, // 0xD3
                                          0x0,                      // no offset
                                          SSD1306_SETSTARTLINE | 0x0, // line #0
                                          SSD1306_CHARGEPUMP};        // 0x8D
  ssd1306_commandList(init2, sizeof(init2));

  ssd1306_command1((vccstate == SSD1306_EXTERNALVCC) ? 0x10 : 0x14);

  static const uint8_t PROGMEM init3[] = {SSD1306_MEMORYMODE, // 0x20
                                          0x00, // 0x0 act like ks0108
                                          SSD1306_SEGREMAP | 0x1,
                                          SSD1306_COMSCANDEC};
  ssd1306_commandList(init3, sizeof(init3));

  uint8_t comPins = 0x02;
  contrast = 0x8F;

  if ((WIDTH == 128) && (HEIGHT == 32)) {
    comPins = 0x02;
    contrast = 0x8F;
  } else if ((WIDTH == 128) && (HEIGHT == 64)) {
    comPins = 0x12;
    contrast = (vccstate == SSD1306_EXTERNALVCC) ? 0x9F : 0xCF;
  } else if ((WIDTH == 96) && (HEIGHT == 16)) {
    comPins = 0x2; // ada x12
    contrast = (vccstate == SSD1306_EXTERNALVCC) ? 0x10 : 0xAF;
  } else {
    // Other screen varieties -- TBD
  }

  ssd1306_command1(SSD1306_SETCOMPINS);
  ssd1306_command1(comPins);
  ssd1306_command1(SSD1306_SETCONTRAST);
  ssd1306_command1(contrast);

  ssd1306_command1(SSD1306_SETPRECHARGE); // 0xd9
  ssd1306_command1((vccstate == SSD1306_EXTERNALVCC) ? 0x22 : 0xF1);
  static const uint8_t PROGMEM init5[] = {
      SSD1306_SETVCOMDETECT, // 0xDB
      0x40,
      SSD1306_DISPLAYALLON_RESUME, // 0xA4
      SSD1306_NORMALDISPLAY,       // 0xA6
      SSD1306_DEACTIVATE_SCROLL,
      SSD1306_DISPLAYON}; // Main screen turn on
  ssd1306_commandList(init5, sizeof(init5));

  TRANSACTION_END

  return true; // Success
}



void hh_Adafruit_SSD1306::drawPixel(int16_t x, int16_t y, uint16_t color) {
  if ((x >= 0) && (x < width()) && (y >= 0) && (y < height())) {
    // Pixel is in-bounds. Rotate coordinates if needed.
    switch (getRotation()) {
    case 1:
      ssd1306_swap(x, y);
      x = WIDTH - x - 1;
      break;
    case 2:
      x = WIDTH - x - 1;
      y = HEIGHT - y - 1;
      break;
    case 3:
      ssd1306_swap(x, y);
      y = HEIGHT - y - 1;
      break;
    }
    switch (color) {
    case SSD1306_WHITE:
      buffer[x + (y / 8) * WIDTH] |= (1 << (y & 7));
      break;
    case SSD1306_BLACK:
      buffer[x + (y / 8) * WIDTH] &= ~(1 << (y & 7));
      break;
    case SSD1306_INVERSE:
      buffer[x + (y / 8) * WIDTH] ^= (1 << (y & 7));
      break;
    }
  }
}


void hh_Adafruit_SSD1306::clearDisplay(void) {
  memset(buffer, 0, WIDTH * ((HEIGHT + 7) / 8));
}



bool hh_Adafruit_SSD1306::getPixel(int16_t x, int16_t y) {
  if ((x >= 0) && (x < width()) && (y >= 0) && (y < height())) {
    // Pixel is in-bounds. Rotate coordinates if needed.
    switch (getRotation()) {
    case 1:
      ssd1306_swap(x, y);
      x = WIDTH - x - 1;
      break;
    case 2:
      x = WIDTH - x - 1;
      y = HEIGHT - y - 1;
      break;
    case 3:
      ssd1306_swap(x, y);
      y = HEIGHT - y - 1;
      break;
    }
    return (buffer[x + (y / 8) * WIDTH] & (1 << (y & 7)));
  }
  return false; // Pixel out of bounds
}


uint8_t *hh_Adafruit_SSD1306::getBuffer(void) { return buffer; }


void hh_Adafruit_SSD1306::display(void) {
  TRANSACTION_START
  static const uint8_t PROGMEM dlist1[] = {
      SSD1306_PAGEADDR,
      0,                      // Page start address
      0xFF,                   // Page end (not really, but works here)
      SSD1306_COLUMNADDR, 0}; // Column start address
  ssd1306_commandList(dlist1, sizeof(dlist1));
  ssd1306_command1(WIDTH - 1); // Column end address

#if defined(ESP8266)
  // ESP8266 needs a periodic yield() call to avoid watchdog reset.
  // With the limited size of SSD1306 displays, and the fast bitrate
  // being used (1 MHz or more), I think one yield() immediately before
  // a screen write and one immediately after should cover it.  But if
  // not, if this becomes a problem, yields() might be added in the
  // 32-byte transfer condition below.
  yield();
#endif
  uint16_t count = WIDTH * ((HEIGHT + 7) / 8);
  uint8_t *ptr = buffer;


    wire->beginTransmission(i2caddr);
    WIRE_WRITE((uint8_t)0x40);
    uint16_t bytesOut = 1;
    while (count--) {
      if (bytesOut >= WIRE_MAX) {
        wire->endTransmission();
        wire->beginTransmission(i2caddr);
        WIRE_WRITE((uint8_t)0x40);
        bytesOut = 1;
      }
      WIRE_WRITE(*ptr++);
      bytesOut++;
    }
    wire->endTransmission();


  TRANSACTION_END
#if defined(ESP8266)
  yield();
#endif
}//display

hh.h



#ifndef _Adafruit_SSD1306_H_
#define _Adafruit_SSD1306_H_

#define SSD1306_128_32 ///< DEPRECATED: old way to specify 128x32 screen

#if defined(ARDUINO_STM32_FEATHER)
typedef class HardwareSPI SPIClass;
#endif

#include <Adafruit_GFX.h>
#include <SPI.h>
#include <Wire.h>

#if defined(__AVR__)
typedef volatile uint8_t PortReg;
typedef uint8_t PortMask;
#define HAVE_PORTREG
#elif defined(__SAM3X8E__)
typedef volatile RwReg PortReg;
typedef uint32_t PortMask;
#define HAVE_PORTREG
#elif (defined(__arm__) || defined(ARDUINO_FEATHER52)) &&                      \
    !defined(ARDUINO_ARCH_MBED) && !defined(ARDUINO_ARCH_RP2040)
typedef volatile uint32_t PortReg;
typedef uint32_t PortMask;
#define HAVE_PORTREG
#endif

/// The following "raw" color names are kept for backwards client compatability
/// They can be disabled by predefining this macro before including the Adafruit
/// header client code will then need to be modified to use the scoped enum
/// values directly
#ifndef NO_ADAFRUIT_SSD1306_COLOR_COMPATIBILITY
#define BLACK SSD1306_BLACK     ///< Draw 'off' pixels
#define WHITE SSD1306_WHITE     ///< Draw 'on' pixels
#define INVERSE SSD1306_INVERSE ///< Invert pixels
#endif
/// fit into the SSD1306_ naming scheme
#define SSD1306_BLACK 0   ///< Draw 'off' pixels
#define SSD1306_WHITE 1   ///< Draw 'on' pixels
#define SSD1306_INVERSE 2 ///< Invert pixels

#define SSD1306_MEMORYMODE 0x20          ///< See datasheet
#define SSD1306_COLUMNADDR 0x21          ///< See datasheet
#define SSD1306_PAGEADDR 0x22            ///< See datasheet
#define SSD1306_SETCONTRAST 0x81         ///< See datasheet
#define SSD1306_CHARGEPUMP 0x8D          ///< See datasheet
#define SSD1306_SEGREMAP 0xA0            ///< See datasheet
#define SSD1306_DISPLAYALLON_RESUME 0xA4 ///< See datasheet
#define SSD1306_DISPLAYALLON 0xA5        ///< Not currently used
#define SSD1306_NORMALDISPLAY 0xA6       ///< See datasheet
#define SSD1306_INVERTDISPLAY 0xA7       ///< See datasheet
#define SSD1306_SETMULTIPLEX 0xA8        ///< See datasheet
#define SSD1306_DISPLAYOFF 0xAE          ///< See datasheet
#define SSD1306_DISPLAYON 0xAF           ///< See datasheet
#define SSD1306_COMSCANINC 0xC0          ///< Not currently used
#define SSD1306_COMSCANDEC 0xC8          ///< See datasheet
#define SSD1306_SETDISPLAYOFFSET 0xD3    ///< See datasheet
#define SSD1306_SETDISPLAYCLOCKDIV 0xD5  ///< See datasheet
#define SSD1306_SETPRECHARGE 0xD9        ///< See datasheet
#define SSD1306_SETCOMPINS 0xDA          ///< See datasheet
#define SSD1306_SETVCOMDETECT 0xDB       ///< See datasheet

#define SSD1306_SETLOWCOLUMN 0x00  ///< Not currently used
#define SSD1306_SETHIGHCOLUMN 0x10 ///< Not currently used
#define SSD1306_SETSTARTLINE 0x40  ///< See datasheet

#define SSD1306_EXTERNALVCC 0x01  ///< External display voltage source
#define SSD1306_SWITCHCAPVCC 0x02 ///< Gen. display voltage from 3.3V

#define SSD1306_RIGHT_HORIZONTAL_SCROLL 0x26              ///< Init rt scroll
#define SSD1306_LEFT_HORIZONTAL_SCROLL 0x27               ///< Init left scroll
#define SSD1306_VERTICAL_AND_RIGHT_HORIZONTAL_SCROLL 0x29 ///< Init diag scroll
#define SSD1306_VERTICAL_AND_LEFT_HORIZONTAL_SCROLL 0x2A  ///< Init diag scroll
#define SSD1306_DEACTIVATE_SCROLL 0x2E                    ///< Stop scroll
#define SSD1306_ACTIVATE_SCROLL 0x2F                      ///< Start scroll
#define SSD1306_SET_VERTICAL_SCROLL_AREA 0xA3             ///< Set scroll range

// Deprecated size stuff for backwards compatibility with old sketches
#if defined SSD1306_128_64
#define SSD1306_LCDWIDTH 128 ///< DEPRECATED: width w/SSD1306_128_64 defined
#define SSD1306_LCDHEIGHT 64 ///< DEPRECATED: height w/SSD1306_128_64 defined
#endif
#if defined SSD1306_128_32
#define SSD1306_LCDWIDTH 128 ///< DEPRECATED: width w/SSD1306_128_32 defined
#define SSD1306_LCDHEIGHT 32 ///< DEPRECATED: height w/SSD1306_128_32 defined
#endif
#if defined SSD1306_96_16
#define SSD1306_LCDWIDTH 96  ///< DEPRECATED: width w/SSD1306_96_16 defined
#define SSD1306_LCDHEIGHT 16 ///< DEPRECATED: height w/SSD1306_96_16 defined
#endif

/*!
    @brief  Class that stores state and functions for interacting with
            SSD1306 OLED displays.
*/
class hh_Adafruit_SSD1306 : public Adafruit_GFX {
public:
  // NEW CONSTRUCTORS -- recommended for new projects
  hh_Adafruit_SSD1306(uint8_t w, uint8_t h, TwoWire *twi = &Wire,
                   int8_t rst_pin = -1, uint32_t clkDuring = 400000UL,
                   uint32_t clkAfter = 100000UL);

  ~hh_Adafruit_SSD1306(void);

  bool begin(uint8_t switchvcc = SSD1306_SWITCHCAPVCC, uint8_t i2caddr = 0,
             bool reset = true, bool periphBegin = true);
  void display(void);
  void clearDisplay(void);
  void drawPixel(int16_t x, int16_t y, uint16_t color);
  void ssd1306_command(uint8_t c);
  bool getPixel(int16_t x, int16_t y);
  uint8_t *getBuffer(void);

protected:
  void ssd1306_command1(uint8_t c);
  void ssd1306_commandList(const uint8_t *c, uint8_t n);

  SPIClass *spi;   ///< Initialized during construction when using SPI. See
                   ///< SPI.cpp, SPI.h
  TwoWire *wire;   ///< Initialized during construction when using I2C. See
                   ///< Wire.cpp, Wire.h
  uint8_t *buffer; ///< Buffer data used for display buffer. Allocated when
                   ///< begin method is called.
  int8_t i2caddr;  ///< I2C address initialized when begin method is called.
  int8_t vccstate; ///< VCC selection, set by begin method.
  int8_t page_end; ///< not used
  int8_t mosiPin;  ///< (Master Out Slave In) set when using SPI set during
                   ///< construction.
  int8_t clkPin;   ///< (Clock Pin) set when using SPI set during construction.
  int8_t dcPin;    ///< (Data Pin) set when using SPI set during construction.
  int8_t
      csPin; ///< (Chip Select Pin) set when using SPI set during construction.
  int8_t rstPin; ///< Display reset pin assignment. Set during construction.

#ifdef HAVE_PORTREG
  PortReg *mosiPort, *clkPort, *dcPort, *csPort;
  PortMask mosiPinMask, clkPinMask, dcPinMask, csPinMask;
#endif
#if ARDUINO >= 157
  uint32_t wireClk;    ///< Wire speed for SSD1306 transfers
  uint32_t restoreClk; ///< Wire speed following SSD1306 transfers
#endif
  uint8_t contrast; ///< normal contrast setting for this device
#if defined(SPI_HAS_TRANSACTION)
protected:
  // Allow sub-class to change
  SPISettings spiSettings;
#endif
};

#endif // _Adafruit_SSD1306_H_