M5NanoC6、リレー Grove- Relay であそぶ

参考

結果

プログラム

//Grove_Relay_1S_M5NanoC6_1

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin as an output.
  pinMode(1, OUTPUT); //1 = G1
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(1, HIGH);   // turn the on (HIGH is the voltage level)
  delay(1000);             // wait for a second
  digitalWrite(1, LOW);    // turn the off by making the voltage LOW
  delay(1000);             // wait for a second
}