(デカ文字)ESP32でカラー液晶、赤外線距離計を作って遊ぶ1(センサー仕様)

(デカ文字)ESP32でカラー液晶、赤外線距離計を作って遊ぶ1(センサー仕様)

x mbedがわかる人むけ

x ST7735

参考

目的
ESP32カラー液晶のサンプルを何個か作て遊ぶ。

30Hは、30cm

プログラム

//ser_slave_ir_length_color010_1

#include "mbed.h"

//10の割り算 0から1028までは、正しい。主に0から999
#define DIV10(n) ((n*205)>>11)


DigitalOut TX(PA_2);

#define UART_DELAY 101 //  1/9600 98-105


//仮想シリアルへの一文字出力 9600bps
int pc_putc(char ch)
{
    TX=1;
    TX=0;//Start
    wait_us(UART_DELAY);

    for(int ii=0; ii<8; ii++) { //Data x 8
        TX=(ch>>ii)&1;
        wait_us(UART_DELAY);
    }; //for

    TX=1;//Stop
    wait_us(UART_DELAY);

    return(0);
} //pc_putc


//80-20
unsigned char qq[] = {
    80, 78, 77, 76, 75, 75, 74, 73, 72, 71,
    70, 69, 68, 68, 67, 66, 65, 65, 64, 63,
    63, 62, 61, 61, 60, 60, 59, 58, 58, 57,
    57, 56, 56, 55, 55, 54, 54, 53, 53, 52,
    52, 51, 51, 50, 50, 50, 49, 49, 48, 48,
    47, 47, 47, 46, 46, 46, 45, 45, 45, 44,
    44, 44, 43, 43, 43, 42, 42, 42, 41, 41,
    41, 41, 40, 40, 40, 40, 39, 39, 39, 38,
    38, 38, 38, 37, 37, 37, 37, 37, 36, 36,
    36, 36, 35, 35, 35, 35, 35, 34, 34, 34,
    34, 34, 33, 33, 33, 33, 33, 32, 32, 32,
    32, 32, 32, 31, 31, 31, 31, 31, 31, 30,
    30, 30, 30, 30, 30, 30, 29, 29, 29, 29,
    29, 29, 28, 28, 28, 28, 28, 28, 28, 28,
    27, 27, 27, 27, 27, 27, 27, 27, 26, 26,
    26, 26, 26, 26, 26, 26, 25, 25, 25, 25,
    25, 25, 25, 25, 25, 25, 24, 24, 24, 24,
    24, 24, 24, 24, 24, 24, 23, 23, 23, 23,
    23, 23, 23, 23, 23, 23, 22, 22, 22, 22,
    22, 22, 22, 22, 22, 22, 22, 22, 21, 21,
    21, 21, 21, 21, 21, 21, 21, 21, 21, 21,
    21, 20, 20, 20, 20, 20, 20, 20, 20, 20,
    20, 20, 20, 20, 20, 20
};

//20-10
unsigned char pp[] = {
    200, 199, 198, 197, 196, 196, 195, 194, 193, 193,
    192, 191, 190, 190, 189, 188, 187, 187, 186, 185,
    185, 184, 183, 183, 182, 181, 181, 180, 179, 179,
    178, 177, 177, 176, 176, 175, 174, 174, 173, 173,
    172, 171, 171, 170, 170, 169, 168, 168, 167, 167,
    166, 166, 165, 165, 164, 163, 163, 162, 162, 161,
    161, 160, 160, 159, 159, 158, 158, 157, 157, 156,
    156, 155, 155, 154, 154, 153, 153, 152, 152, 151,
    151, 151, 150, 150, 149, 149, 148, 148, 147, 147,
    147, 146, 146, 145, 145, 144, 144, 144, 143, 143,
    142, 142, 142, 141, 141, 140, 140, 140, 139, 139,
    138, 138, 138, 137, 137, 136, 136, 136, 135, 135,
    135, 134, 134, 134, 133, 133, 132, 132, 132, 131,
    131, 131, 130, 130, 130, 129, 129, 129, 128, 128,
    128, 127, 127, 127, 126, 126, 126, 125, 125, 125,
    125, 124, 124, 124, 123, 123, 123, 122, 122, 122,
    121, 121, 121, 121, 120, 120, 120, 119, 119, 119,
    119, 118, 118, 118, 117, 117, 117, 117, 116, 116,
    116, 116, 115, 115, 115, 114, 114, 114, 114, 113,
    113, 113, 113, 112, 112, 112, 112, 111, 111, 111,
    111, 110, 110, 110, 110, 109, 109, 109, 109, 108,
    108, 108, 108, 107, 107, 107, 107, 107, 106, 106,
    106, 106, 105, 105, 105, 105, 105, 104, 104, 104,
    104, 103, 103, 103, 103, 103, 102, 102, 102, 102,
    102, 101, 101, 101, 101, 101, 100, 100, 100, 100,
    100
};

//10-6
unsigned char oo[] = {
    100, 99, 98, 98, 97, 97, 96, 96, 95, 95,
    94, 94, 93, 93, 92, 92, 91, 91, 90, 90,
    90, 89, 89, 88, 88, 87, 87, 86, 86, 86,
    85, 85, 84, 84, 84, 83, 83, 82, 82, 82,
    81, 81, 81, 80, 80, 80, 79, 79, 78, 78,
    77, 77, 76, 76, 75, 75, 74, 74, 74, 73,
    73, 72, 72, 71, 71, 71, 70, 70, 69, 69,
    68, 67, 66, 66, 65, 64, 63, 63, 62, 61,
    61, 60, 60
};


//赤外線距離センサー(GP2Y0A21YK)の電圧から距離を求める。
//Voltage //電圧
int ir_len_i(int Voltage)
{

    int ir_length;   //長さ

    if (Voltage >= 0    && Voltage <= 400 ) {
        return (800);
    }
    if (Voltage >= 3120 && Voltage <= 5000) {
        return (60);
    }

    if        (Voltage >= 400 && Voltage <= 1300 ) { //80-20

        ir_length = (int)qq[(Voltage - 400) >> 2];
        ir_length = ir_length * 10;

    } else if (Voltage >= 1300 && Voltage <= 2300 ) { //20-10

        ir_length = (int)pp[(Voltage - 1300) >> 2];

    } else if (Voltage >= 2300 && Voltage <= 3120  ) { //10-6

        //ir_length = (int)oo[(Voltage - 2300) / 10];
        ir_length = (int)oo[  ((Voltage - 2300)*205)>>11 ]; //10の割り算

    }//end if

    //戻り値
    return (ir_length);

} //ir_le_i


//アナログ入力の設定
AnalogIn adc_vbat(PA_5); //PA_5

unsigned char b=200; //マスターに返す値


//メインルーチン
int main()
{

    TX=1; //ポートの初期化

    int sensorValue; //センサーの読み取り値
    int Voltage;     //電圧
    int ir_length;   //長さ

    //無限ループ
    while(1) {

    //アナログ値の読み込み  0から4096
    sensorValue = (adc_vbat.read_u16()>>4);
    //sensorValue = 1024;
    //sensorValue = 2854; // debug 100mm

    //アナログ値を電圧に変換
    Voltage = (sensorValue * 3300) >> 12; //stm32　(s*3300)/4096
    //Voltage = 2300; //debug 100mm

    //赤外線距離センサー(GP2Y0A21YK)の電圧から距離を求める。
    ir_length = ir_len_i(Voltage);

/*
    //送信データの表示 num debug
    int d = ir_length;
    char data_read[4]; //バッファーの定義
    data_read[3] = 0;
    data_read[2] = '0' + (  d - (DIV10(d) * 10)  );  // '0'+(d%10)
    d = DIV10(d);
    data_read[1] = '0' + (  d - (DIV10(d) * 10)  );  // '0'+(d%10)
    data_read[0] = '0' +  DIV10(d);                  // '0'+(d/10)
    pc_putc(data_read[0]);
    pc_putc(data_read[1]);
    pc_putc(data_read[2]);
    pc_putc('\r');
    pc_putc('\n');
*/

  //1の桁と10の桁を分離して二進化十進へ
  int s = DIV10(ir_length);
  int bh,bl,bc;

  bh = DIV10(s); //s / 10;
  bl = s - (bh * 10);

  bc = (bh*16)+bl;


    //ソフトウェアシリアルから距離を出力
    pc_putc(bc);

/*
    //送信データの表示 num debug
    int d = bc;
    char data_read[4]; //バッファーの定義
    data_read[3] = 0;
    data_read[2] = '0';
    data_read[1] = '0' + ( d     & 0x0f);
    data_read[0] = '0' + ((d>>4) & 0x0f);
    pc_putc(data_read[0]);
    pc_putc(data_read[1]);
    pc_putc(data_read[2]);
    pc_putc('\r');
    pc_putc('\n');
*/


        //1秒の待ち
        wait_ms(1000);

    }//while

}//main

//容量削減
void error(const char* format, ...) {}