LoginSignup
0
0

Delete article

Deleted articles cannot be recovered.

Draft of this article would be also deleted.

Are you sure you want to delete this article?

More than 1 year has passed since last update.

@caa45040(caa45040)

ESP32、ILI9163Vを使い表示する。(Adafruit_改造)(仮想VRAM)(SRAM40K以上)ATM0177B3A

Last updated at Posted at 2023-12-02

ESP32、ILI9163Vを使い表示する。(Adafruit_改造)(仮想VRAM)(SRAM40K以上)ATM0177B3A

x 過去ログを見よ
x Adafruit_GFXインストール

目的
カラー液晶のテスト
なんにも、しなくても十分、速かった。

o_cop830.jpg

配線　各自、データシートを確認の事

SPI DATA 23
SPI CLK 18



  //GPIOの設定2　開始
  #define TFT_CS    14
  #define TFT_RST   15
  #define TFT_RS    32
  #define GPIO_D14(s)  digitalWrite(TFT_CS,s)
  #define GPIO_D15(s)  digitalWrite(TFT_RST,s)
  #define GPIO_D32(s)  digitalWrite(TFT_RS,s)
  #define GPIO_CS(y)     GPIO_D14(y)
  #define GPIO_RESET(y)  GPIO_D15(y)
  #define GPIO_RS(y)     GPIO_D32(y)

LEDのあそーど、かそーどは、抵抗を入れて適切に接続

ILI9163V_VRAM1_767_1

ILI9163V_VRAM1_767_1



//ILI9163V_VRAM1_767_1


//ヘッダーファイル
#include <Adafruit_GFX.h>
#include "hh.h"

 
//定義
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 160 // OLED display height, in pixels
NA_ST7735_P display(SCREEN_WIDTH, SCREEN_HEIGHT);


// ビットマップデータ
uint8_t databytes[8] =
{
  0b01100110,
  0b10101111,
  0b10111111,
  0b11011111,

  0b01111110,
  0b01111110,
  0b00111100,
  0b00011000
};


//初期化
void setup() {

  //ディスプレイの初期化
  display.begin();


  //表示方向
  display.setRotation(0);


  // 画面表示をクリア
  display.clearDisplay();


  //ビットマップの表示
  //display.drawBitmap(0, 0, databytes, 8, 8,  WHITE);
  display.drawBitmap(3, 3, databytes, 8, 8,  RED);


  // テキストサイズを設定
  display.setTextSize(3);
  // テキスト色を設定
  //display.setTextColor(WHITE);
  display.setTextColor(RED);
  // テキストの開始位置を設定
  display.setCursor(20, 20);

  // 1行目に46を表示
  display.println("H-SPI");


  // 画面の左側に長方形(塗りつぶしなし)を描画
  // display.drawRect(左上x, 左上y, 幅, 高さ, 線の色)
  display.drawRect(0, 0, 127, 159, WHITE);

  // 描画バッファの内容を画面に表示
  display.display();

}//setup


//メインループ
void loop() {
}//loop

hh.cpp

hh.cpp




//インクルド
#include "hh.h"
#include <Adafruit_GFX.h>
#include <SPI.h>


//定義
///< No-temp-var swap operation
#define NA_ST7735_P_swap(a, b)        \
  (((a) ^= (b)), ((b) ^= (a)), ((a) ^= (b)))

/*
//GPIOの設定1　開始
#define TFT_CS    10
#define TFT_RST   9
#define TFT_RS    8
#define GPIO_D10(s) digitalWrite(TFT_CS,s)
#define GPIO_D9(s)  digitalWrite(TFT_RST,s)
#define GPIO_D8(s)  digitalWrite(TFT_RS,s)
#define GPIO_CS(y)     GPIO_D10(y)
#define GPIO_RESET(y)  GPIO_D9(y)
#define GPIO_RS(y)     GPIO_D8(y)
*/

  //GPIOの設定2　開始
  #define TFT_CS    14
  #define TFT_RST   15
  #define TFT_RS    32
  #define GPIO_D14(s)  digitalWrite(TFT_CS,s)
  #define GPIO_D15(s)  digitalWrite(TFT_RST,s)
  #define GPIO_D32(s)  digitalWrite(TFT_RS,s)
  #define GPIO_CS(y)     GPIO_D14(y)
  #define GPIO_RESET(y)  GPIO_D15(y)
  #define GPIO_RS(y)     GPIO_D32(y)


void NA_ST7735_P::GPIO_8BIT(uint8_t s)
{

  SPI.transfer(s);

} //GPIO_8BIT


//コマンドの書き込み
void NA_ST7735_P::LCD_Write_CMD(uint8_t a)
{

  GPIO_CS(0);//CS=0; 12
  GPIO_RS(0); //A0=0; 9
  GPIO_8BIT(a);//P1=a; data SPI SPI
  GPIO_CS(1);//CS=1; 12

} //LCD_Write_CMD


//データ書き込み
void NA_ST7735_P::LCD_Write_Data(uint8_t a)
{

  GPIO_CS(0);//CS=0; 12
  GPIO_RS(1); //A0=1; 9
  GPIO_8BIT(a);//P1=a; data SPI SPI
  GPIO_CS(1);//CS=1; 12

} //LCD_Write_Data


//液晶の初期化処理
void NA_ST7735_P::TXDT144TF_ST7735S_Init(void)
{

  //----------  ST7735S Reset Sequence  --------//

  GPIO_RESET(1);//LCD_RESET=1;
  delay(1); //Delay 1ms

  GPIO_RESET(0);//LCD_RESET=0;
  delay(1); //Delay 1ms

  GPIO_RESET(1);//LCD_RESET=1;
  delay(120); //Delay 120ms

  LCD_Write_CMD(0x01);//SOFTWARE RESET
  delay(50);

  LCD_Write_CMD(0x01);//SOFTWARE RESET
  delay(50);

  LCD_Write_CMD(0x11);//SLEEP OUT
  delay(200);

  LCD_Write_CMD(0x29);//display on
  delay(100);

  LCD_Write_CMD(0x36);//RGB-RGR format
  LCD_Write_Data(0x00);//RGB mode
  delay(100);

  LCD_Write_CMD(0x3a);//Interface pixel format
  LCD_Write_Data(0x55);//16bit mode
  delay(100);

} //TXDT144TF_ST7735S_Init


NA_ST7735_P::NA_ST7735_P(uint8_t w, uint8_t h)
  : Adafruit_GFX(w, h), buffer(NULL)

{
}


//バッファのクリア
NA_ST7735_P::~NA_ST7735_P(void) {
  if (buffer) {
    free(buffer);
    buffer = NULL;
  }
}//~NA_ST7735_P


//初期処理
bool NA_ST7735_P::begin(void) {

  if ((!buffer) && !(buffer = (uint16_t *)malloc(WIDTH * HEIGHT * 2)))
    return false;

  //バッファーのクリア
  clearDisplay();

  //ポートのモード設定
  //アウトプットモード
  pinMode(TFT_CS, OUTPUT);
  pinMode(TFT_RST, OUTPUT);
  pinMode(TFT_RS, OUTPUT);

  //ポートの初期化
  GPIO_CS(1);//CS=1
  GPIO_RESET(1);//RESET=1
  GPIO_RS(0);//RS=0

  // SPIの初期化
  SPI.beginTransaction( SPISettings(16000000, MSBFIRST, SPI_MODE0) );
  //SPI.beginTransaction( SPISettings( 8000000, MSBFIRST, SPI_MODE0) );
  //SPI.beginTransaction( SPISettings( 4000000, MSBFIRST, SPI_MODE0) );
  //SPI.beginTransaction( SPISettings( 2000000, MSBFIRST, SPI_MODE0) );
  //SPI.beginTransaction( SPISettings( 1000000, MSBFIRST, SPI_MODE0) );
  SPI.begin(); // 11 12 13

  delay(500); //0.5秒待つ

  //液晶の初期化処理
  TXDT144TF_ST7735S_Init();

  return true; // Success
}//begin


//点の表示
void NA_ST7735_P::drawPixel(int16_t x, int16_t y, uint16_t color) {
  if ((x >= 0) && (x < width()) && (y >= 0) && (y < height())) {
    // Pixel is in-bounds. Rotate coordinates if needed.
    switch (getRotation()) {
      case 1:
        NA_ST7735_P_swap(x, y);
        x = WIDTH - x - 1;
        break;
      case 2:
        x = WIDTH - x - 1;
        y = HEIGHT - y - 1;
        break;
      case 3:
        NA_ST7735_P_swap(x, y);
        y = HEIGHT - y - 1;
        break;
    }//end switch

    //ドットのカラーの設定
    buffer[ (y << 7) | x ] = color;

  }//if
}//drawPixel


//バッファのクリア
void NA_ST7735_P::clearDisplay(void) {
  memset(buffer, 0, WIDTH * HEIGHT * 2 );
}


bool NA_ST7735_P::getPixel(int16_t x, int16_t y) {
  if ((x >= 0) && (x < width()) && (y >= 0) && (y < height())) {
    // Pixel is in-bounds. Rotate coordinates if needed.
    switch (getRotation()) {
      case 1:
        NA_ST7735_P_swap(x, y);
        x = WIDTH - x - 1;
        break;
      case 2:
        x = WIDTH - x - 1;
        y = HEIGHT - y - 1;
        break;
      case 3:
        NA_ST7735_P_swap(x, y);
        y = HEIGHT - y - 1;
        break;
    }
    return (buffer[ (y << 7) | x ] );
  }
  return false; // Pixel out of bounds
}


uint16_t *NA_ST7735_P::getBuffer(void) {
  return buffer;
}


//画面のリフレッシュ
void NA_ST7735_P::display(void) {

  //画面の書き込み開始
  LCD_Write_CMD(0x2C); //memory write
  delay(2);

  int vg;
  for (int i = 0; i < (HEIGHT * WIDTH); i++) {
    vg = buffer[i];
    //---------------- 1バイト目
    LCD_Write_Data((vg >> 7) & 0xff);
    //---------------- 2バイト目
    LCD_Write_Data(       vg & 0xff);
  }//i

}//display

hh.h

hh.h



#ifndef _NA_ST7735_P_H_
#define _NA_ST7735_P_H_

#include <Adafruit_GFX.h>

#ifndef NO_ADAFRUIT_NA_ST7735_P_COLOR_COMPATIBILITY
#define BLACK NA_ST7735_P_BLACK     ///< Draw 'off' pixels
#define WHITE NA_ST7735_P_WHITE     ///< Draw 'on' pixels
#define RED NA_ST7735_P_RED     ///< Draw 'on' pixels
//#define INVERSE NA_ST7735_P_INVERSE ///< Invert pixels
#endif
/// fit into the SSD1306_ naming scheme
#define NA_ST7735_P_BLACK 0x0000   ///< Draw 'off' pixels
#define NA_ST7735_P_WHITE 0xffff   ///< Draw 'on' pixels
#define NA_ST7735_P_RED 0b1111100000000000 //red

///< Draw 'on' pixels
//#define NA_ST7735_P_INVERSE 2 ///< Invert pixels


class NA_ST7735_P : public Adafruit_GFX {
  public:

    NA_ST7735_P(uint8_t w, uint8_t h);

    ~NA_ST7735_P(void);

    bool begin(void);
    void display(void);
    void clearDisplay(void);
    void drawPixel(int16_t x, int16_t y, uint16_t color);
    bool getPixel(int16_t x, int16_t y);
    uint16_t *getBuffer(void);

    void GPIO_8BIT(uint8_t s);
    void LCD_Write_CMD(uint8_t ww);
    void LCD_Write_Data(uint8_t ii);
    void TXDT144TF_ST7735S_Init(void);


  protected:

    uint16_t *buffer; ///< Buffer data used for display buffer. Allocated when
                      ///< begin method is called.
 
};

#endif // _NA_ST7735_P_H_
0
0
0

Register as a new user and use Qiita more conveniently

  1. You get articles that match your needs
  2. You can efficiently read back useful information
  3. You can use dark theme
What you can do with signing up
Sign upLogin
0
0

Delete article

Deleted articles cannot be recovered.

Draft of this article would be also deleted.

Are you sure you want to delete this article?