デバッグコンソール

ログインした状態でhome.htm?page=debugを開くとTechnical Supportページが表示される.
内部で事前に定義された以下のコマンドのみ実行可能で,出力例のように複数のprintコマンドがまとめて実行される.

使用できるコマンド

printOsMemory
- 各プロセスのメモリ使用率
printHwCounters
- 内部カウンタ情報? 手持ちの個体では何も表示されず
printL2Status
- L2の各情報(Trunk, FDB)
printL3Status
- L3の各情報(詳細不明)
printControlStatus
- 各種ステータス(QoS, PoE, SFP)
printPoEStatus
- PoE給電情報? 手持ちの個体では確認不可
printL1PortStatus {IF(例: 1/1)}
- インタフェースの情報(リンク速度, Up-Down回数等)
printSensorsInfo
- 各センサーの温度
printSysInfo
- システム情報(筐体情報, UpTime, 温度, ホスト名, MAC, シリアル, FW情報)
printI2CInfo
- ファン回転速度, 各コンポーネント情報(CPU, MAC, PHY, Flash)
printSFPTemp
- SFPモジュールの給電及び温度情報

出力例

アドレス等一部編集済みです

printOsMemory

print 2sw bufs
Non Free Rx buffers = 0.   Free Rx Buffers = 512
print os bufs used
Name              Addr      Bsize    Bufn    Free Type
--------------------------------------------------------------------
SKit           FFFFFFFF        0    2462    2460    ITC
// 省略
print tasks utilize


 TASK NAME   5-seconds minute    5-minutes 
 -----------------------------------------
 GOAH        9         0         0         
// 省略
Showing tasks with at least 5 percentage usage
print os timers
Timers Table. Current Tick: 1817348
Timerp    Pipe     Timeout   
*****************************
FFFFFFFF   DNSCL     1817482  
// 省略
print os pipes
Name    pipeid   signals     buf num    
------------------------------------
SPPE     ffffffff 00000000 
// 省略
print os pipes used
Name    pipeid   signals     buf num    
------------------------------------

printL2Status

print l2 status  :  (0)
===========================================================
print hal trunk 0  
===========================================================
 cpssDxChTrunkDump - Start 
print global device parameters 
L4LongTrunkHash [0] , IPv6TrunkHashMode[0] (global)TrunkHashMode[LBH_PACKETS_INFO] , EnL4Hash[0] EnIPHash[1] , AddMACHash[1] 
designatedMode[USE_INGRESS_HASH] 
Trunk<n> Non-Trunk Members Table (0<=n<128) 
trunk [0]  : [0xffffffff] [0xffffffff] [0xffffffff] [0xffffffff] prvCpssGenericTrunkDbTrunkTypeGet: FAIL [4] on trunk[0]
// 省略
Designated Trunk Port Entry<n> table 
Designated entry [0]  : [0xffffffff] [0xffffffff] [0xffffffff] [0xffffffff] 
// 省略
per port , (ingress) trunk indication 
no port is associated with trunk 
Trunk<n> Members Table (1..127) 
each trunk members is : <port , device> 
all trunks with only NULL port member 
 cpssDxChTrunkDump - End 
 cpssGenericTrunkDumpDb - Start 
 cpssGenericTrunkDumpDb - End 
===========================================================
print hal fdb 0  full
===========================================================
 [D]: Dev ID. [P]: Port. [A]: Aged. [S]: Is Static.
 [da]: DA command. [sa]: SA command. [R]: DA route.
 [M]: Mirror to RX analyzer. [Qd]: DA QoS index. [Qs]: SA Qos Index.
 [CPU]: App Specific CPU Code. [SrcId]: source ID 

----- FDB table ------
|    400 |  ok | mode: MAC,  hw: ff:ff:ff:ff:ff:ff,    1 | mode: IPv6, hw: ff:ff:ff:ff, 0          | D: 0 P: 0 A:1 S:0 da:0 sa:0 R:0 M:0 Qd:0 Qs:0 CPU:0 SrcId:0 |
// 省略
Chain too long enable is [TRUE]
===========================================================
print hal vidx  
===========================================================
---- software used vidx ----
   0, 
---------------------------
----- vidx table device 0------
|index | cpu | ports list
|    0 |  + | 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,63,

printL3Status

print prestera ip hw 0 4 tcam
print prestera ip hw 0 4 lpm
000.000.000.000. - 191.000.000.000. / 08  -> NH 0
 4007 
// 省略
LPM lines used by the virtual router buckets:
    Block[0]: 6
// 省略
Buckets per type:
   Regular node = 0
   Compressed 1 node = 5
   Compressed 2 node = 1
Average bucket size per type:
   Regular node = 0.00
   Compressed 1 node = 4.40
   Compressed 2 node = 8.00

Number of non default next hop pointers: 0

<octet>  <lpm lines>  <# buckets>  <# comp1>  <# comp2>  <# regular>
----------------------------------------------------------------------------------------------------------------
    1	 6	 1	 1	 0	 0
    2	 4	 1	 1	 0	 0
    3	 8	 1	 0	 1	 0
    4	 12	 3	 3	 0	 0
    5	 0	 0	 0	 0	 0
    6	 0	 0	 0	 0	 0
    7	 0	 0	 0	 0	 0
    8	 0	 0	 0	 0	 0
print prestera ip hw 0 6 tcam
print prestera ip hw 0 6 lpm
0000:0000:0000:0000:0000:0000:0000:0000: - FD00:0000:0000:0000:0000:0000:0000:0000: / 08  -> NH 0
 4000 
// 省略
LPM lines used by the virtual router buckets:
    Block[0]: 4
// 省略
Buckets per type:
   Regular node = 0
   Compressed 1 node = 2
   Compressed 2 node = 0
Average bucket size per type:
   Regular node = 0.00
   Compressed 1 node = 4.00
   Compressed 2 node = 0.00

Number of non default next hop pointers: 0

<octet>  <lpm lines>  <# buckets>  <# comp1>  <# comp2>  <# regular>
----------------------------------------------------------------------------------------------------------------
    1	 4	 1	 1	 0	 0
// 省略

printControlStatus

print hal tx full
***** HAL TX *****
Queue 0: Tx:        0, End:        0, Err:        0, End Err:        0
Queue 1: Tx:        0, End:        0, Err:        0, End Err:        0
Queue 2: Tx:        0, End:        0, Err:        0, End Err:        0
Queue 3: Tx:        0, End:        0, Err:        0, End Err:        0
Queue 4: Tx:        0, End:        0, Err:        0, End Err:        0
Queue 5: Tx:        0, End:        0, Err:        0, End Err:        0
Queue 6: Tx:    34257, End:        0, Err:        0, End Err:        0
Queue 7: Tx:        0, End:        0, Err:        0, End Err:        0
Total:   Tx:    34257, End:        0, Err:        0, End Err:        0
Stack: Last Tx:        0, Last End:        0, Missing:        0, Seq Drop:        0
***** HAL PARAM *****
Param: Des Dev 0, Tx Dec Num 512,
Queue 0: Sem Name HLT0 Tx Dec Num 64
Queue 1: Sem Name HLT1 Tx Dec Num 64
Queue 2: Sem Name HLT2 Tx Dec Num 64
Queue 3: Sem Name HLT3 Tx Dec Num 64
Queue 4: Sem Name HLT4 Tx Dec Num 64
Queue 5: Sem Name HLT5 Tx Dec Num 64
Queue 6: Sem Name HLT6 Tx Dec Num 64
Queue 7: Sem Name HLT7 Tx Dec Num 64
Tx Queues: Stack 7, Control 6, Data 6
***** HAL HW *****
Buf Int Cause0: Reg 0xFFFFFFFF val 0xF mask 0x0 masked val 0xF
Buf Int Cause1: Reg 0xFFFFFFFF val 0xFFFFFF mask 0xbadad masked val 0xFFFFF
print hal rx full
Rx Total: 100955, Errors: 0
Queue: 0, Rx: 780 
Queue: 1, Rx: 0 
Queue: 2, Rx: 56881 
Queue: 3, Rx: 2925 
Queue: 4, Rx: 0 
Queue: 5, Rx: 27576 
Queue: 6, Rx: 12793 
Queue: 7, Rx: 0 
CPU Code:  32, Rx: 56829 
CPU Code: 300, Rx: 123 
CPU Code: 304, Rx: 2788 
CPU Code: 323, Rx: 45 
CPU Code: 326, Rx: 27453 
CPU Code: 410, Rx: 731 
CPU Code: 417, Rx: 137 
CPU Code: 441, Rx: 52 
CPU Code: 510, Rx: 12793 
CPU Code: 526, Rx: 4 
cpssEventRecv    869656, 770767 No events
HALC_hw_api_packet_rx: 199844, 0 Error packets
num of select       :    98866
Queue 7 weight 16 - strict priority
Queue 6 weight 1
Queue 5 weight 2
Queue 4 weight 1
Queue 3 weight 2
Queue 2 weight 1
Queue 1 weight 1
Queue 0 weight 1
Queue[0] has been locked[0] times
Queue[1] has been locked[0] times
Queue[2] has been locked[0] times
Queue[3] has been locked[0] times
Queue[4] has been locked[0] times
Queue[5] has been locked[0] times
Queue[6] has been locked[0] times
Queue[7] has been locked[0] times
print hal sdma rx 0
Rx Queue 0:
	 ->enable 1 pkts 40310 octets 420 errors 0
	 ->Num of descriptors: free 122 max 122 forbidQEn 0
	 ->Next2receive buffptr 0xFFFFFFFF(0xBADAD)
	 ->Next2return buffptr 0xFFFFFFFF(0xBADAD)
Rx Queue 1:
	 ->enable 1 pkts 0 octets 0 errors 0
	 ->Num of descriptors: free 122 max 122 forbidQEn 0
	 ->Next2receive buffptr 0xFFFFFFFF(0xBADAD)
	 ->Next2return buffptr 0xFFFFFFFF(0xBADAD)
Rx Queue 2:
	 ->enable 1 pkts 2132084 octets 26648 errors 0
	 ->Num of descriptors: free 122 max 122 forbidQEn 0
	 ->Next2receive buffptr 0xFFFFFFFF(0xBADAD)
	 ->Next2return buffptr 0xFFFFFFFF(0xBADAD)
Rx Queue 3:
	 ->enable 1 pkts 187862 octets 1377 errors 0
	 ->Num of descriptors: free 245 max 245 forbidQEn 0
	 ->Next2receive buffptr 0xFFFFFFFF(0xBADAD)
	 ->Next2return buffptr 0xFFFFFFFF(0xBADAD)
Rx Queue 4:
	 ->enable 1 pkts 0 octets 0 errors 0
	 ->Num of descriptors: free 122 max 122 forbidQEn 0
	 ->Next2receive buffptr 0xFFFFFFFF(0xBADAD)
	 ->Next2return buffptr 0xFFFFFFFF(0xBADAD)
Rx Queue 5:
	 ->enable 1 pkts 1485912 octets 18111 errors 0
	 ->Num of descriptors: free 506 max 506 forbidQEn 0
	 ->Next2receive buffptr 0xFFFFFFFF(0xBADAD)
	 ->Next2return buffptr 0xFFFFFFFF(0xBADAD)
Rx Queue 6:
	 ->enable 1 pkts 657621 octets 4064 errors 0
	 ->Num of descriptors: free 122 max 122 forbidQEn 0
	 ->Next2receive buffptr 0xFFFFFFFF(0xBADAD)
	 ->Next2return buffptr 0xFFFFFFFF(0xBADAD)
Rx Queue 7:
	 ->enable 1 pkts 0 octets 0 errors 0
	 ->Num of descriptors: free 122 max 122 forbidQEn 0
	 ->Next2receive buffptr 0xFFFFFFFF(0xBADAD)
	 ->Next2return buffptr 0xFFFFFFFF(0xBADAD)
print hal sdma tx 0
print hal bm global status 0
FC HOL Global Status in device 0:
**********************************

function HALP_hw_pipe_debug_print_fc_hol_status returned with status 0x1e. line 196
Number of Buffers Allocated [0xFFFFFFFF] = 16777215 / 12288
function HALP_hw_pipe_debug_print_fc_hol_status returned with status 0x1e. line 200
TXQ Number of Buffers Queued = 65535 / 765357 
function HALP_hw_pipe_debug_print_fc_hol_status returned with status 0x1e. line 204
TXQ Number of Descriptors Allocated = 65535 / 44461
function HALP_hw_pipe_debug_print_fc_hol_status returned with status 0x1e. line 207
function HALP_hw_pipe_debug_print_fc_hol_status returned with status 0x1e. line 208
TXQ Number of Multicast Descriptors Allocated = 65535 / 0
print hal trunk 0
 cpssDxChTrunkDump - Start 
print global device parameters 
L4LongTrunkHash [0] , IPv6TrunkHashMode[0] (global)TrunkHashMode[LBH_PACKETS_INFO] , EnL4Hash[0] EnIPHash[1] , AddMACHash[1] 
designatedMode[USE_INGRESS_HASH] 
Trunk<n> Non-Trunk Members Table (0<=n<128) 
trunk [0]  : [0xffffffff] [0xffffffff] [0xffffffff] [0xffffffff] prvCpssGenericTrunkDbTrunkTypeGet: FAIL [4] on trunk[0]
// 省略
Designated Trunk Port Entry<n> table 
Designated entry [0]  : [0xffffffff] [0xffffffff] [0xffffffff] [0xffffffff] 
// 省略
per port , (ingress) trunk indication 
no port is associated with trunk 
Trunk<n> Members Table (1..127) 
each trunk members is : <port , device> 
all trunks with only NULL port member 
 cpssDxChTrunkDump - End 
 cpssGenericTrunkDumpDb - Start 
 cpssGenericTrunkDumpDb - End 
print hal sfp status
Description: print hal sfp status
fail counters:
HALP_ev_sfp_present_fail_count 0 
HALP_ev_sfp_loss_fail_count 0 
HALP_ev_sfp_tx_fail_count 0 
HALP_ev_sfp_polling_interval_ms 500 
HALP_ev_sfp_cascade_wa_interval_ms 10000 
HALP_ev_sfp_polling_counter_factor 2 
HALP_ev_sfp_extended_polling_counter_factor 5 
sfp_speed_detection_support 1 
sfp_present_msg_support 1 
sfp_loss_indication_support 1 
sfp_tx_operation_support 1 
print hal ev poe params
HALP_ev_poe_debug_trm_print_params 

General: 
HALP_ev_poe_mtsc_support: True 
HALP_ev_poe_mtsc_poe_power_management_support: True 
HALP_ev_poe_powered_pd_ports_mtsc_support: False 
HALP_ev_poe_ports_statistics_mtsc_support: True 
HALP_ev_poe_enable_periodic_master: True 
HALP_ev_poe_waiting_for_send[0]: 0 
HALP_ev_poe_waiting_for_send[1]: 0 
HALP_ev_poe_waiting_for_send[2]: 0 
HALP_ev_poe_waiting_for_send[3]: 0 
HALP_ev_poe_waiting_for_send[4]: 0 
HALP_ev_poe_polling_periodic_sleep_variant_ms_debug: 0 
HALP_ev_poe_ports_statistics_periodic_interval_mtsc_ms: 60000 
HALP_ev_poe_polling_periodic_get_powered_pd_ports_changes_interval_ms: 0 
HALP_ev_poe_polling_periodic_get_changes_interval_mtsc_ms: 1500 
HALP_ev_poe_polling_periodic_interval_mtsc_ms: 1000 
HALP_ev_poe_polling_periodic_get_power_available_change_interval_ms: 3000 
HALP_ev_poe_polling_periodic_vop_interval_mtsc_ms: 600000 
Device VoP status:[poe device:status]
[0:device ok] [1:device ok] [2:device ok] [3:device ok] [4:device ok] [5:device ok] [6:device ok] [7:device ok] [8:device ok] [9:device ok] [10:device ok] [11:device ok] [12:device ok] [13:device ok] [14:device ok] [15:device ok] 
--------------------------------

Debug Counters: 
----------------
HALP_ev_poe_sleep_time_counter: 0 
HALP_ev_poe_alloc_buf_to_master_fail_counter: 0 
HALP_ev_poe_alloc_buf_to_master_success_counter: 0 
--------------------------------

HALP_ev_poe_port_status_rel_ports_power_up :
--------------------------------------------
--------------------------------

powered_pd_ports_rel_ports :
----------------------------
--------------------------------

printL1PortStatus 1/1

print port reg 1
Port Status Register 0xFFFFFFFF value [0xFFFF]
Port Auto-Negotiation Configuration 0xFFFFFFFF value [0xFFFF]
Tri-Speed Port MAC Control Register0 0xFFFFFFFF value [0xFFFF]
Tri-Speed Port MAC Control Register1 0xFFFFFFFF value [0xFFFF]
Tri-Speed Port MAC Control Register2 0xFFFFFFFF value [0xFFFF]
Tri-Speed Port MAC Control Register3 0xFFFFFFFF value [0xFFF]
Tri-Speed Port MAC Control Register4 0xFFFFFFFF value [0xFFF]
XLG Port MAC Control Register0 0xFFFFFFFF value [0xFFF]
XLG Port MAC Control Register1 0xFFFFFFFF value [0xFFFF]
XLG Port MAC Control Register2 0xFFFFFFFF value [0xFFF]
XLG Port MAC Control Register3 0xFFFFFFFF value [0xFFFF]
XLG Port MAC Control Register4 0xFFFFFFFF value [0xFFFF]
print hal port config 1
rel_ifIndex |admin |speed      |inf-mode   |auto-neg |an-cap |an-prefer | sfp-type   |duplex  |FEC   |MODE    |fc-an 
1           |On    |1000       |SGMII      |On       |0x800d |Slave     | 18         |FULL    |fc-off|Regular |Off   
print hal sfp db 1
Description: print hal sfp db
SFP ports DB


|rel_IfIndx|if_index  |sfpPrtTyp |tx_status |prsnt_stat|loss_stat |tx&loss   |sfpStatTyp|sfp_op_mod|
|----------|----------|----------|----------|----------|----------|----------|----------|----------|


Dynamic stack link
print hal port attributes 1
rel_ifIndex|Interface Mode |PHY Speed |PHY Link|MAC Speed |MAC Link|Duplex|Enabled|LC Mask|SD Mask|TX Swap|RX Swap
===========|===============|==========|========|==========|========|======|=======|=======|=======|=======|=======
          1|SGMII          |1000M     |UP      |1000      |UP      |FULL  |TRUE   |FALSE  |FALSE  |FALSE  |FALSE  
print hal serdes 1
rel_ifIndex | dev | port |  pre  |    post    | atten | sqlch | dcGain | bandWidth |
=========== | === | ==== | ===== | ========== | ===== | ===== | ====== | ========= |
          1 |   0 |    0 |     0 |          0 |    19 |   148 |    100 |        13 |




rel_ifIndex | dev | port | DC  | LF  | HF  | BW  | EO  |DFE[0]|DFE[1]|DFE[2]|DFE[3]|DFE[4]|DFE[5]|DFE[6]|DFE[7]|DFE[8]|DFE[9]|DFE[10]|DFE[11]|DFE[12]
=========== | === | ==== | === | === | === | === | === |======|======|======|======|======|======|======|======|======|======|=======|=======|======
          1 |   0 |    0 |  100|   15|   15|   13|    0|     0|     0|     0|     0|     0|     0|     0|     0|     0|     0|     0|     0|     0|
// 省略
print hal link
Link changes Total: 55, Errors: 0, Restarts: 0
Select events Errors: 0
Link flapping errdisable is Enabled
Link flapping timers: burst_window_duration [1000msec], max_lc_in_burst [3], max_burst_count [10]
In Burst Violation: count [10], back-off time [500msec]

printSensorsInfo

Unit Thermal Status 
---- -------------- 
 1         OK       
Unit/Sensor  Sensor Status   Temperature (C)   Warning  Alarm Temp(C)    Critical Alarm Temp(C)   Location 
----------- ---------------- ---------------- ------------------------- ------------------------- -------- 
    1/1            OK               23                   53                        58               PCB    
    1/2            OK               42                   69                        71               PCB    
    1/3            OK               35                   59                        63               PCB    
    1/4            OK               62                   103                       108               PP    
    1/5            OK               42                   103                       108              CPU    
    1/6            OK               34                   103                       108              PHY    
    1/7            OK               29                   103                       108              PHY    
    1/8            OK               43                   103                       108              PHY

printSysInfo

System Description:                       HPE Networking Instant On Switch 12p 10GBT 4p SFP+ 1960 JL805A
System Up Time (days,hour:min:sec):       00,00:00:00
System Contact:                           
System Name:                              hostname
System Location:                          
System MAC Address:                       ff:ff:ff:ff:ff:ff
System Object ID:                         1.3.6.1.4.1.11.2.3.7.11.201
Unit          Type          
---- ---------------------- 
 1   Instant On 1960 12XT   
     4XF Switch JL805A      
Unit                Fans Status             
----   -------------------------------------
 1                FANs OK                
Unit Temperature (Celsius)   Status   
---- --------------------- ---------- 
 1            63               OK     
       Unit            Serial number    
------------------- ------------------- 
         1              FFFFFFFFFF      
    component       source               version              
------------------ --------- -------------------------------- 
      Image                              3.1.0.9              
      Kernel         Linux               4.4.120              
unit     component       source               version              
---- ------------------ --------- -------------------------------- 
 1         UBOOT         Marvell  2013.01 2016_T1.0.v10 V1.0.0.30

printI2CInfo

Unit ID: 1

Unit/Fan ID     Fan Actual Speed (RPM)         Fan Status     

------------    ----------------------         ----------                           

    1/1                  1575                      OK         

    1/2                  1725                      OK         

unit     component      index  vendor         MPN         revision   
---- ------------------ ----- --------- ---------------- ----------- 
 1          CPU           1    Marvell        6810          0x04     
 1          CPU           2    Marvell        6810          0x0a     
 1          MAC           1    Marvell      98DX8316        0x00     
 1          PHY           1    Marvell      88X3540         0x00     
 1          PHY           2    Marvell      88X3540         0x00     
 1          PHY           3    Marvell      88X3540         0x00     
 1         Flash          1   Macronix  MX30LF4G18AC                 
                                        512MB

printSFPTemp

   Port      Temp  Voltage Current Output  Input   LOS 
             [C]   [Volt]  [mA]    Power   Power       
                                   [mWatt] [mWatt]     
----------- ------ ------- ------- ------- ------- --- 
   1/13      N/A     N/A     N/A     N/A     N/A   N/A 
   1/14      N/A     N/A     N/A     N/A     N/A   N/A 
   1/15      N/A     N/A     N/A     N/A     N/A   N/A 
   1/16      N/A     N/A     N/A     N/A     N/A   N/A 
 Temp                      - Internally measured transceiver temperature
 Voltage                   - Internally measured supply voltage
 Current                   - Measured TX bias current
 Output Power              - Measured TX output power in milliWatts
 Input Power               - Measured RX received power in milliWatts
 LOS                       - Loss of signal
 N/A - Not Available, N/S - Not Supported, W - Warning, E - Error