https://qiita.com/XKYUXSOX/items/a270c28c04fafabfdac0
パターン１との違いは
classpathの部分とnativepathの部分を選択できるようにしている点。
※たいていはデフォルトで作成するだけなので、パターン１で十分だと思う。

jvminfo.txt

yyd1Node01,server1
yyd1Node01,server2
yyd2Node01,server1

yyd1Node01_server1.jdbc

"DB2","DB2 Using IBM JCC Driver","XA data source","DB2 Using IBM JCC DriverXA","${DB2_JCC_DRIVER_PATH}/db2jcc4.jar ${UNIVERSAL_JDBC_DRIVER_PATH}/db2jcc_license_cu.jar ${DB2_JCC_DRIVER_PATH}/db2jcc_license_cisuz.jar ${PUREQUERY_PATH}/pdq.jar ${PUREQUERY_PATH}/pdqmgmt.jar",${DB2_JCC_DRIVER_NATIVEPATH}
"DB2","DB2 Using IBM JCC Driver","Connection pool data source","DB2 Using IBM JCC DriverONE","${DB2_JCC_DRIVER_PATH}/db2jcc4.jar ${UNIVERSAL_JDBC_DRIVER_PATH}/db2jcc_license_cu.jar ${DB2_JCC_DRIVER_PATH}/db2jcc_license_cisuz.jar ${PUREQUERY_PATH}/pdq.jar ${PUREQUERY_PATH}/pdqmgmt.jar",${DB2_JCC_DRIVER_NATIVEPATH}

JDBC_set.py

import csv

with open('jvminfo.txt') as f:
    csvreader = csv.reader(f)
    for row in csvreader:
      nodename=row[0]
      servername=row[1]
      id=AdminConfig.getid('/Node:'+nodename+'/Server:'+servername+'/')

      with open(nodename+'_'+servername+'.jdbc') as f2:
          csvreader2 = csv.reader(f2)
          for row2 in csvreader2:
           J_dtype=row2[0]
           J_ptype=row2[1]
           J_itype=row2[2]
           J_name=row2[3]
           J_clspath=row2[4]
           J_ntvpath=row2[5]

           AdminTask.createJDBCProvider('[-scope Node='+nodename+',Server='+servername+' -databaseType "'+J_dtype+'" -providerType "'+J_ptype+'" -implementationType "'+J_itype+'" -name "'+J_name+'" -classpath "'+J_clspath+'" -nativePath '+J_ntvpath+' ]')

AdminConfig.save()

毎度の設定確認

JDBC_get.py

import csv

with open('jvminfo.txt') as f:
    csvreader = csv.reader(f)
    for row in csvreader:
      nodename=row[0]
      servername=row[1]
      id=AdminConfig.getid('/Node:'+nodename+'/Server:'+servername+'/')

      with open(nodename+'_'+servername+'.jdbc') as f2:
          csvreader2 = csv.reader(f2)
          for row2 in csvreader2:
           J_name=row2[3]
           ProcessID = AdminConfig.list('JDBCProvider',id)
           JDBCList=AdminUtilities.convertToList(ProcessID)
           for jpv in JDBCList:
             if AdminConfig.showAttribute(jpv,'name') == J_name:
               print nodename + servername
               print AdminConfig.showAttribute(jpv,'name')
               print AdminConfig.showAttribute(jpv,'xa')