ZABBIXも6.0となり、従来のインストール方法では入らなくなったので作成。
ZABBIXの設定を開始できるようにするところまでの手順となります。

先に仕様を眺めておく。MariaDBはVerUPしないとZABBIXが起動しない。以下の仕様を参照。

https://www.zabbix.com/documentation/current/en/manual/installation/requirements#database-management-system

MySQL関係のものを削除する。

# dnf remove mysql*

MySQL関係プログラムの削除が完了したところで、ディレクトリ類も削除しておく。

# rm -rf /etc/my.cnf
# rm -rf /etc/my.cnf.d
# rm -rf /var/lib/mysql
# rm -rf /usr/share/mysql

Webサーバーのインストール

# dnf -y install httpd

設定修正

# vi /etc/httpd/conf/httpd.conf

#89行目あたり。管理者アドレスを設定
ServerAdmin root@test.com

#98行目アンコメントおよびサーバー名設定
ServerName www.test.com:80

##147行目の変更 (Indexes は削除)
Options FollowSymLinks

#154行目の変更
AllowOverride All

#167行目あたり
DirectoryIndex index.html index.php index.cgi

# これは最終行に追記する（サーバーの応答ヘッダ）
ServerTokens Prod

設定反映のためサーバー再起動実行

# systemctl enable --now httpd

PHPインストール
まず以下のコマンドを実行

# dnf module list php

実行結果は以下の通り。

[root@localhost ~]# dnf module list php 
Last metadata expiration check: 0:07:21 ago on Tue 24 May 2022 09:43:13 PM JST.
CentOS Stream 8 - AppStream
Name                          Stream                           Profiles                                               Summary                                       
php                           7.2 [d]                          common [d], devel, minimal                             PHP scripting language                        
php                           7.3                              common [d], devel, minimal                             PHP scripting language                        
php                           7.4 [e]                          common [d] [i], devel, minimal                         PHP scripting language                        
php                           8.0                              common [d], devel, minimal                             PHP scripting language                        

Hint: [d]efault, [e]nabled, [x]disabled, [i]nstalled

PHPの導入前設定

# dnf module reset php
# dnf module enable php:7.4

PHP7.4を指定して導入開始

# dnf module -y install php:7.4/common

導入後のバージョン確認

# php -v 
PHP 7.4.19 (cli) (built: May  4 2021 11:06:37) ( NTS )
Copyright (c) The PHP Group
Zend Engine v3.4.0, Copyright (c) Zend Technologies

MariaDB10.6のインストール
ただ単純にdnfでインストールしても入らないのでレポジトリを入手。

# curl -O https://downloads.mariadb.com/MariaDB/mariadb_repo_setup

ダウンロードしたセットアッププログラムを実行する。

# bash mariadb_repo_setup --mariadb-server-version mariadb-10.6

実行結果は以下の通り（成功パターン）

# bash mariadb_repo_setup --mariadb-server-version mariadb-10.6
# [info] Checking for script prerequisites.
# [info] MariaDB Server version 10.6 is valid
# [info] Repository file successfully written to /etc/yum.repos.d/mariadb.repo
# [info] Adding trusted package signing keys...
/etc/pki/rpm-gpg ~
~
# [info] Successfully added trusted package signing keys
# [info] Cleaning package cache...
37 files removed

次にMariaDBプログラムをインストールする。

実行結果は以下の通り（成功パターン）

# dnf install MariaDB-server MariaDB-client -y
CentOS Stream 8 - AppStream                                                                                                         446 kB/s |  22 MB     00:50    
CentOS Stream 8 - BaseOS                                                                                                            590 kB/s |  22 MB     00:38    
CentOS Stream 8 - Extras                                                                                                             48 kB/s |  18 kB     00:00    
CentOS Stream 8 - Extras common packages                                                                                             12 kB/s | 4.3 kB     00:00    
MariaDB Server                                                                                                                      470 kB/s | 586 kB     00:01    
MariaDB MaxScale                                                                                                                    8.1 kB/s | 8.2 kB     00:01    
MariaDB Tools                                                                                                                       2.7 kB/s | 4.0 kB     00:01    
Zabbix Official Repository - x86_64                                                                                                  33 kB/s |  69 kB     00:02    
Zabbix Official Repository non-supported - x86_64                                                                                   1.1 kB/s | 1.2 kB     00:01    
Dependencies resolved.
====================================================================================================================================================================
 Package                                   Architecture                      Version                                  Repository                               Size
====================================================================================================================================================================
Installing:
 MariaDB-client                            x86_64                            10.6.8-1.el8                             mariadb-main                             14 M
 MariaDB-server                            x86_64                            10.6.8-1.el8                             mariadb-main                             25 M
Installing dependencies:
 MariaDB-common                            x86_64                            10.6.8-1.el8                             mariadb-main                             88 k
 MariaDB-shared                            x86_64                            10.6.8-1.el8                             mariadb-main                            116 k
     replacing  mariadb-connector-c.x86_64 3.1.11-2.el8_3
     replacing  mariadb-connector-c-config.noarch 3.1.11-2.el8_3
 galera-4                                  x86_64                            26.4.11-1.el8                            mariadb-main                             13 M
 socat                                     x86_64                            1.7.4.1-1.el8                            appstream                               323 k

Transaction Summary
====================================================================================================================================================================
Install  6 Packages

Total download size: 54 M
Downloading Packages:
(1/6): MariaDB-common-10.6.8-1.el8.x86_64.rpm                                                                                       121 kB/s |  88 kB     00:00    
(2/6): MariaDB-client-10.6.8-1.el8.x86_64.rpm                                                                                       4.9 MB/s |  14 MB     00:02    
(3/6): MariaDB-server-10.6.8-1.el8.x86_64.rpm                                                                                       9.7 MB/s |  25 MB     00:02    
(4/6): MariaDB-shared-10.6.8-1.el8.x86_64.rpm                                                                                       163 kB/s | 116 kB     00:00    
(5/6): galera-4-26.4.11-1.el8.x86_64.rpm                                                                                            9.3 MB/s |  13 MB     00:01    
(6/6): socat-1.7.4.1-1.el8.x86_64.rpm                                                                                                61 kB/s | 323 kB     00:05    
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total                                                                                                                               9.6 MB/s |  54 MB     00:05     
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
  Preparing        :                                                                                                                                            1/1 
  Running scriptlet: MariaDB-shared-10.6.8-1.el8.x86_64                                                                                                         1/8 
  Installing       : MariaDB-shared-10.6.8-1.el8.x86_64                                                                                                         1/8 
  Running scriptlet: MariaDB-shared-10.6.8-1.el8.x86_64                                                                                                         1/8 
  Running scriptlet: MariaDB-common-10.6.8-1.el8.x86_64                                                                                                         2/8 
  Installing       : MariaDB-common-10.6.8-1.el8.x86_64                                                                                                         2/8 
  Running scriptlet: MariaDB-common-10.6.8-1.el8.x86_64                                                                                                         2/8 
  Running scriptlet: MariaDB-client-10.6.8-1.el8.x86_64                                                                                                         3/8 
  Installing       : MariaDB-client-10.6.8-1.el8.x86_64                                                                                                         3/8 
  Running scriptlet: MariaDB-client-10.6.8-1.el8.x86_64                                                                                                         3/8 
  Installing       : socat-1.7.4.1-1.el8.x86_64                                                                                                                 4/8 
  Running scriptlet: galera-4-26.4.11-1.el8.x86_64                                                                                                              5/8 
  Installing       : galera-4-26.4.11-1.el8.x86_64                                                                                                              5/8 
  Running scriptlet: galera-4-26.4.11-1.el8.x86_64                                                                                                              5/8 
  Running scriptlet: MariaDB-server-10.6.8-1.el8.x86_64                                                                                                         6/8 
  Installing       : MariaDB-server-10.6.8-1.el8.x86_64                                                                                                         6/8 
  Running scriptlet: MariaDB-server-10.6.8-1.el8.x86_64                                                                                                         6/8 
  Obsoleting       : mariadb-connector-c-3.1.11-2.el8_3.x86_64                                                                                                  7/8 
  Obsoleting       : mariadb-connector-c-config-3.1.11-2.el8_3.noarch                                                                                           8/8 
  Running scriptlet: MariaDB-server-10.6.8-1.el8.x86_64                                                                                                         8/8 
  Running scriptlet: mariadb-connector-c-config-3.1.11-2.el8_3.noarch                                                                                           8/8 
  Verifying        : socat-1.7.4.1-1.el8.x86_64                                                                                                                 1/8 
  Verifying        : MariaDB-client-10.6.8-1.el8.x86_64                                                                                                         2/8 
  Verifying        : MariaDB-common-10.6.8-1.el8.x86_64                                                                                                         3/8 
  Verifying        : MariaDB-server-10.6.8-1.el8.x86_64                                                                                                         4/8 
  Verifying        : MariaDB-shared-10.6.8-1.el8.x86_64                                                                                                         5/8 
  Verifying        : mariadb-connector-c-3.1.11-2.el8_3.x86_64                                                                                                  6/8 
  Verifying        : mariadb-connector-c-config-3.1.11-2.el8_3.noarch                                                                                           7/8 
  Verifying        : galera-4-26.4.11-1.el8.x86_64                                                                                                              8/8 

Installed:
  MariaDB-client-10.6.8-1.el8.x86_64      MariaDB-common-10.6.8-1.el8.x86_64      MariaDB-server-10.6.8-1.el8.x86_64      MariaDB-shared-10.6.8-1.el8.x86_64     
  galera-4-26.4.11-1.el8.x86_64           socat-1.7.4.1-1.el8.x86_64             

Complete!

実行

# systemctl enable mariadb --now

MySQLの初期設定

# mysql_secure_installation

対話型で以下のように設定。

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we'll need the current
password for the root user.  If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none): 
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.

Set root password? [Y/n] y
New password: 
Re-enter new password: 
Password updated successfully!
Reloading privilege tables..
 ... Success!


By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] n
 ... skipping.

By default, MariaDB comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!

ZABBIX Serevrのインストールの実施

# dnf -y install php-mysqlnd php-gd php-xml php-bcmath php-ldap
# dnf -y install https://repo.zabbix.com/zabbix/6.0/rhel/8/x86_64/zabbix-release-6.0-1.el8.noarch.rpm
# dnf -y install zabbix-server-mysql zabbix-web-mysql zabbix-apache-conf zabbix-sql-scripts zabbix-selinux-policy zabbix-agent

ZABBIXむけDBの作成と関連設定。
IDとしてのzabbixのログインパスワードはとりあえずpasswordにした。Internetからのアクセスがある場合は複雑なものにすべき。

# mysql -u root -p

Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 16
Server version: 10.3.28-MariaDB MariaDB Server

Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MariaDB [(none)]> show grants for root@localhost; 
+----------------------------------------------------------------------------------------------------------------------------------------+
| Grants for root@localhost                                                                                                              |
+----------------------------------------------------------------------------------------------------------------------------------------+
| GRANT ALL PRIVILEGES ON *.* TO `root`@`localhost` IDENTIFIED BY PASSWORD '*81195E2F4FD71FDAC8697F9D3007A54327A9147A' WITH GRANT OPTION |
| GRANT PROXY ON ''@'%' TO 'root'@'localhost' WITH GRANT OPTION                                                                          |
+----------------------------------------------------------------------------------------------------------------------------------------+
2 rows in set (0.000 sec)

MariaDB [(none)]> create database zabbix; 
Query OK, 1 row affected (0.000 sec)

MariaDB [(none)]> grant all privileges on zabbix.* to zabbix@'localhost' identified by 'password'; 
Query OK, 0 rows affected (0.000 sec)

MariaDB [(none)]> flush privileges; 
Query OK, 0 rows affected (0.000 sec)

MariaDB [(none)]> exit

次にZABBIXのDBのスキームを設定する。

# zcat /usr/share/doc/zabbix-sql-scripts/mysql/server.sql.gz | mysql -u zabbix -p zabbix 
Enter password:

Zabbix Confの設定。

# vi /etc/zabbix/zabbix_server.conf

以下の部分を修正（今回はパスワードを「password」とした場合の設定）

DBPassword=password

完了後、zabbix-serverの起動

# systemctl restart zabbix-server zabbix-agent httpd php-fpm
# systemctl enable zabbix-server zabbix-agent httpd php-fpm

SELinuxの設定

# setsebool -P zabbix_can_network on 
# setsebool -P httpd_can_connect_zabbix on 
# setsebool -P domain_can_mmap_files on 
# setsebool -P daemons_enable_cluster_mode on

# vi zabbix_server.te

zabbix_server.teの内容は以下の通り。
※こちらを参考にしています(https://www.server-world.info/query?os=CentOS_Stream_8&p=zabbix60&f=1)

module zabbix_server 1.0;

require {
        type initctl_t;
        type devlog_t;
        type proc_kcore_t;
        type zabbix_t;
        type zabbix_agent_t;
        type rpm_exec_t;
        type rpm_var_lib_t;
        class fifo_file getattr;
        class sock_file getattr;
        class file { execute execute_no_trans map open getattr };
        class capability dac_override;
}

#============= zabbix_t ==============
allow zabbix_t self:capability dac_override;

#============= zabbix_agent_t ==============
allow zabbix_agent_t devlog_t:sock_file getattr;
allow zabbix_agent_t initctl_t:fifo_file getattr;
allow zabbix_agent_t proc_kcore_t:file getattr;
allow zabbix_agent_t rpm_var_lib_t:file open;
allow zabbix_agent_t rpm_exec_t:file { execute execute_no_trans map };

以下を実行。

# checkmodule -m -M -o zabbix_server.mod zabbix_server.te
# semodule_package --outfile zabbix_server.pp --module zabbix_server.mod
# semodule -i zabbix_server.pp

Firewall設定

# firewall-cmd --add-service=http --permanent 
# firewall-cmd --add-service=https --permanent 
# firewall-cmd --add-service=mysql --permanent 
# firewall-cmd --add-port={10051/tcp,10050/tcp} --permanent 
# firewall-cmd --reload

ZabbixAgent設定

Agentの設定をする場合。今回はZABBIXサーバーに入れたAgentの設定を行う場合となります。

vi /etc/zabbix/zabbix_agentd.conf

以下のように修正

Server=127.0.0.1
ServerActive=127.0.0.1
Hostname=zb02.test.com  <-任意で変更してください

これにて完了。以下のようにアクセスするとZABBIXの設定を開始することができます

http://<IPアドレス>/zabbix/