[root@xxxx linuxstudy]# fsck /dev/sdb1
fsck from util-linux 2.23.2
e2fsck 1.42.9 (28-Dec-2013)
/dev/sdb1: clean, 11/37392 files, 10388/148976 blocks

FSCK(8)                                                                                     System Administration                                                                                     FSCK(8)



NAME
       fsck - check and repair a Linux filesystem

SYNOPSIS
       fsck [-lrsAVRTMNP] [-C [fd]] [-t fstype] [filesystem...]  [--] [fs-specific-options]

DESCRIPTION
       fsck  is used to check and optionally repair one or more Linux filesystems.  filesys can be a device name (e.g.  /dev/hdc1, /dev/sdb2), a mount point (e.g.  /, /usr, /home), or an ext2 label or UUID
       specifier (e.g.  UUID=8868abf6-88c5-4a83-98b8-bfc24057f7bd or LABEL=root).  Normally, the fsck program will try to handle filesystems on different physical disk drives  in  parallel  to  reduce  the
       total amount of time needed to check all of them.

       If no filesystems are specified on the command line, and the -A option is not specified, fsck will default to checking filesystems in /etc/fstab serially.  This is equivalent to the -As options.

       The exit code returned by fsck is the sum of the following conditions:

              0      No errors
              1      Filesystem errors corrected
              2      System should be rebooted
              4      Filesystem errors left uncorrected
              8      Operational error
              16     Usage or syntax error
              32     Checking canceled by user request
              128    Shared-library error

       The exit code returned when multiple filesystems are checked is the bit-wise OR of the exit codes for each filesystem that is checked.

       In actuality, fsck is simply a front-end for the various filesystem checkers (fsck.fstype) available under Linux.  The filesystem-specific checker is searched for in /sbin first, then in /etc/fs and
       /etc, and finally in the directories listed in the PATH environment variable.  Please see the filesystem-specific checker manual pages for further details.

OPTIONS
       -l     Lock the whole-disk device by an exclusive flock(2).  This option can be used with one device only (this means that -A and -l are mutually exclusive).  This option is  recommended  when  more
              fsck(8) instances are executed in the same time.  The option is ignored when used for multiple devices or for non-rotating disks.  fsck does not lock underlying devices when executed to check
              stacked devices (e.g. MD or DM) -- this feature is not implemented yet.

       -r     Report certain statistics for each fsck when it completes. These statistics include the exit status, the maximum run set size (in kilobytes), the elapsed all-clock time and the user and  sys‐
              tem CPU time used by the fsck run. For example:

              /dev/sda1: status 0, rss 92828, real 4.002804, user 2.677592, sys 0.86186

       -s     Serialize fsck operations.  This is a good idea if you are checking multiple filesystems and the checkers are in an interactive mode.  (Note: e2fsck(8) runs in an interactive mode by default.
              To make e2fsck(8) run in a non-interactive mode, you must either specify the -p or -a option, if you wish for errors to be corrected automatically, or the -n option if you do not.)

       -t fslist
              Specifies the type(s) of filesystem to be checked.  When the -A flag is specified, only filesystems that match fslist are checked.  The fslist parameter is a comma-separated list of  filesys‐
              tems  and options specifiers.  All of the filesystems in this comma-separated list may be prefixed by a negation operator 'no' or '!', which requests that only those filesystems not listed in
              fslist will be checked.  If none of the filesystems in fslist is prefixed by a negation operator, then only those listed filesystems will be checked.

              Options specifiers may be included in the comma-separated fslist.  They must have the format opts=fs-option.  If an options specifier is present, then only filesystems which contain fs-option
              in their mount options field of /etc/fstab will be checked.  If the options specifier is prefixed by a negation operator, then only those filesystems that do not have fs-option in their mount
              options field of /etc/fstab will be checked.

              For example, if opts=ro appears in fslist, then only filesystems listed in /etc/fstab with the ro option will be checked.

              For compatibility with Mandrake distributions whose boot scripts depend upon an unauthorized UI change to the fsck program, if a filesystem type of loop is found in fslist, it is  treated  as
              if opts=loop were specified as an argument to the -t option.

              Normally,  the  filesystem  type  is  deduced  by  searching  for filesys in the /etc/fstab file and using the corresponding entry.  If the type can not be deduced, and there is only a single
              filesystem given as an argument to the -t option, fsck will use the specified filesystem type.  If this type is not available, then the default filesystem type (currently ext2) is used.

       -A     Walk through the /etc/fstab file and try to check all filesystems in one run.  This option is typically used from the /etc/rc system initialization file,  instead  of  multiple  commands  for
              checking a single filesystem.

              The  root filesystem will be checked first unless the -P option is specified (see below).  After that, filesystems will be checked in the order specified by the fs_passno (the sixth) field in
              the /etc/fstab file.  Filesystems with a fs_passno value of 0 are skipped and are not checked at all.  Filesystems with a fs_passno value of greater than zero will be checked in  order,  with
              filesystems  with  the lowest fs_passno number being checked first.  If there are multiple filesystems with the same pass number, fsck will attempt to check them in parallel, although it will
              avoid running multiple filesystem checks on the same physical disk.

              fsck does not check stacked devices (RAIDs, dm-crypt, ...) in parallel with any other device.  See below for FSCK_FORCE_ALL_PARALLEL setting.  The /sys filesystem is used to  detemine  depen‐
              dencies between devices.

              Hence, a very common configuration in /etc/fstab files is to set the root filesystem to have a fs_passno value of 1 and to set all other filesystems to have a fs_passno value of 2.  This will
              allow fsck to automatically run filesystem checkers in parallel if it is advantageous to do so.  System administrators might choose not to use this configuration if they need to avoid  multi‐
              ple filesystem checks running in parallel for some reason --- for example, if the machine in question is short on memory so that excessive paging is a concern.

              fsck  normally  does not check whether the device actually exists before calling a filesystem specific checker.  Therefore non-existing devices may cause the system to enter filesystem repair
              mode during boot if the filesystem specific checker returns a fatal error.  The /etc/fstab mount option nofail may be used to have fsck skip non-existing devices.  fsck also skips  non-exist‐
              ing devices that have the special filesystem type auto.

       -C [fd]
              Display  completion/progress  bars for those filesystem checkers (currently only for ext2 and ext3) which support them.  fsck will manage the filesystem checkers so that only one of them will
              display a progress bar at a time.  GUI front-ends may specify a file descriptor fd, in which case the progress bar information will be sent to that file descriptor.

       -M     Do not check mounted filesystems and return an exit code of 0 for mounted filesystems.

       -N     Don't execute, just show what would be done.

       -P     When the -A flag is set, check the root filesystem in parallel with the other filesystems.  This is not the safest thing in the world to do, since if the root filesystem is  in  doubt  things
              like  the  e2fsck(8)  executable  might  be  corrupted!  This option is mainly provided for those sysadmins who don't want to repartition the root filesystem to be small and compact (which is
              really the right solution).

       -R     When checking all filesystems with the -A flag, skip the root filesystem.  (This is useful in case the root filesystem has already been mounted read-write.)

       -T     Don't show the title on startup.

       -V     Produce verbose output, including all filesystem-specific commands that are executed.

       fs-specific-options
              Options which are not understood by fsck are passed to the filesystem-specific checker.  These options must not take arguments, as there is no way for fsck to be able to properly guess  which
              options take arguments and which don't.

              Options and arguments which follow the -- are treated as filesystem-specific options to be passed to the filesystem-specific checker.

              Please  note that fsck is not designed to pass arbitrarily complicated options to filesystem-specific checkers.  If you're doing something complicated, please just execute the filesystem-spe‐
              cific checker directly.  If you pass fsck some horribly complicated options and arguments, and it doesn't do what you expect, don't bother reporting it as  a  bug.   You're  almost  certainly
              doing something that you shouldn't be doing with fsck.

       Options  to  different filesystem-specific fsck's are not standardized.  If in doubt, please consult the man pages of the filesystem-specific checker.  Although not guaranteed, the following options
       are supported by most filesystem checkers:

       -a     Automatically repair the filesystem without any questions (use this option with caution).  Note that e2fsck(8) supports -a for backward compatibility only.  This option is mapped to  e2fsck's
              -p option which is safe to use, unlike the -a option that some filesystem checkers support.

       -n     For  some  filesystem-specific  checkers, the -n option will cause the fs-specific fsck to avoid attempting to repair any problems, but simply report such problems to stdout.  This is however
              not true for all filesystem-specific checkers.  In particular, fsck.reiserfs(8) will not report any corruption if given this option.  fsck.minix(8) does not support the -n option at all.

       -r     Interactively repair the filesystem (ask for confirmations).  Note: It is generally a bad idea to use this option if multiple fsck's are being  run  in  parallel.   Also  note  that  this  is
              e2fsck's default behavior; it supports this option for backward compatibility reasons only.

       -y     For  some  filesystem-specific  checkers,  the -y option will cause the fs-specific fsck to always attempt to fix any detected filesystem corruption automatically.  Sometimes an expert may be
              able to do better driving the fsck manually.  Note that not all filesystem-specific checkers implement this option.  In particular fsck.minix(8) and  fsck.cramfs(8)  do  not  support  the  -y
              option as of this writing.

FILES
       /etc/fstab.

ENVIRONMENT VARIABLES
       The fsck program's behavior is affected by the following environment variables:

       FSCK_FORCE_ALL_PARALLEL
              If  this environment variable is set, fsck will attempt to check all of the specified filesystems in parallel, regardless of whether the filesystems appear to be on the same device.  (This is
              useful for RAID systems or high-end storage systems such as those sold by companies such as IBM or EMC.)  Note that the fs_passno value is still used.

       FSCK_MAX_INST
              This environment variable will limit the maximum number of filesystem checkers that can be running at one time.  This allows configurations which have a large number of disks  to  avoid  fsck
              starting  too  many  filesystem  checkers  at once, which might overload CPU and memory resources available on the system.  If this value is zero, then an unlimited number of processes can be
              spawned.  This is currently the default, but future versions of fsck may attempt to automatically determine how many filesystem checks can be run based on gathering accounting data  from  the
              operating system.

       PATH   The  PATH  environment variable is used to find filesystem checkers.  A set of system directories are searched first: /sbin, /sbin/fs.d, /sbin/fs, /etc/fs, and /etc.  Then the set of directo‐
              ries found in the PATH environment are searched.

       FSTAB_FILE
              This environment variable allows the system administrator to override the standard location of the /etc/fstab file.  It is also useful for developers who are testing fsck.

       LIBBLKID_DEBUG=0xffff
              enables debug output.

       LIBMOUNT_DEBUG=0xffff
              enables debug output.

SEE ALSO
       fstab(5), mkfs(8), fsck.ext2(8) or fsck.ext3(8) or e2fsck(8), cramfsck(8), fsck.minix(8), fsck.msdos(8), fsck.jfs(8), fsck.nfs(8), fsck.vfat(8), fsck.xfs(8), fsck.xiafs(8), reiserfsck(8).

AUTHOR
       Theodore Ts'o ⟨tytso@mit.edu⟩

AVAILABILITY
       The fsck command is part of the util-linux package and is available from Linux Kernel Archive ⟨ftp://ftp.kernel.org/pub/linux/utils/util-linux/⟩.



util-linux                                                                                      February 2009                                                                                         FSCK(8)```