rspecの設定

deviseによる認証機構について、とりあえず手始めに、model specを書いていこうと思う。
まずRSpecを導入するために以下の通りgemをinstallする。(今回、開発環境にはdockerを使用している）

Gemfile

  gem 'rspec-rails'
  gem "factory_bot_rails"

terminal

$ docker-compose exec app bundle install

terminal

$ docker-compose exec app bundle exec rails g rspec:install

rails_helper.rb の追記

spec/rails_helper.rb

# This file is copied to spec/ when you run 'rails generate rspec:install'
require 'spec_helper'
ENV['RAILS_ENV'] ||= 'test'
require_relative '../config/environment'
require File.expand_path('../config/environment', __dir__)
# Prevent database truncation if the environment is production
abort("The Rails environment is running in production mode!") if Rails.env.production?
require 'rspec/rails'
require 'capybara/rspec'
require'devise'
require File.expand_path("spec/support/controller_macros.rb")
# Add additional requires below this line. Rails is not loaded until this point!

# Requires supporting ruby files with custom matchers and macros, etc, in
# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
# run as spec files by default. This means that files in spec/support that end
# in _spec.rb will both be required and run as specs, causing the specs to be
# run twice. It is recommended that you do not name files matching this glob to
# end with _spec.rb. You can configure this pattern with the --pattern
# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
#
# The following line is provided for convenience purposes. It has the downside
# of increasing the boot-up time by auto-requiring all files in the support
# directory. Alternatively, in the individual `*_spec.rb` files, manually
# require only the support files necessary.
#
Dir[Rails.root.join('spec', 'support', '**', '*.rb')].sort.each { |f| require f }

# Checks for pending migrations and applies them before tests are run.
# If you are not using ActiveRecord, you can remove these lines.
begin
  ActiveRecord::Migration.maintain_test_schema!
rescue ActiveRecord::PendingMigrationError => e
  abort e.to_s.strip
end
RSpec.configure do |config|
  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
  config.fixture_path = "#{::Rails.root}/spec/fixtures"

  # If you're not using ActiveRecord, or you'd prefer not to run each of your
  # examples within a transaction, remove the following line or assign false
  # instead of true.
  config.use_transactional_fixtures = true

  # You can uncomment this line to turn off ActiveRecord support entirely.
  # config.use_active_record = false

  # RSpec Rails can automatically mix in different behaviours to your tests
  # based on their file location, for example enabling you to call `get` and
  # `post` in specs under `spec/controllers`.
  #
  # You can disable this behaviour by removing the line below, and instead
  # explicitly tag your specs with their type, e.g.:
  #
  #     RSpec.describe UsersController, type: :controller do
  #       # ...
  #     end
  #
  # The different available types are documented in the features, such as in
  # https://relishapp.com/rspec/rspec-rails/docs
  config.infer_spec_type_from_file_location!

  # Filter lines from Rails gems in backtraces.
  config.filter_rails_from_backtrace!
  # arbitrary gems may also be filtered via:
  # config.filter_gems_from_backtrace("gem name")
  config.include Devise::Test::ControllerHelpers, type: :controller
  config.include Devise::Test::IntegrationHelpers, type: :request
  config.extend ControllerMacros, :type => :controller
  config.include FactoryBot::Syntax::Methods
end

テストデータ

今回はdeviseによる認証機構を、IDとパスワードによる認証に改造してあるので、以下のよう記述となる。

spec/factories/user.rb

FactoryBot.define do
  factory :user do
    user_id               {"1212121212"}
    password              {"111111"}
    password_confirmation {"111111"}
  end
end

controller_macros.rbの記述

spec/macros/controller_macros.rb

module ControllerMacros
  def login_admin
    before(:each) do
      @request.env["devise.mapping"] = Devise.mappings[:admin]
      sign_in FactoryBot.create(:admin) # Using factory bot as an example
    end
  end

  def login_user
    before(:each) do
      @request.env["devise.mapping"] = Devise.mappings[:user]
      user = FactoryBot.create(:user)
      user.confirm! # or set a confirmed_at inside the factory. Only necessary if you are using the "confirmable" module
      sign_in user
    end
  end
end

テストの記述

spec/models/user_spec.rb

equire 'rails_helper'

RSpec.describe User, type: :model do
  describe 'ユーザー登録' do
    it "user_id、passwordとpassword_confirmationが存在すれば登録できること" do
      user = build(:user)
      expect(user).to be_valid  # user.valid? が true になればパスする
    end
  end
end

DBの設定

テストを実行するに際して、ここではテスト用のDBコンテナを作成しておく。
docker-compose.ymlにテスト用のDBを作成する。あくまで一例であるが以下のように追記を行う。
ポートマッピングにおけるローカルのポート番号については、mysqlのデフォルトのポート番号が3306番ポートであり、これは開発環境のDBがすでに使っているので、テスト環境では別のポート番号をしてする。（今回は3300番ポートを指定している）

docker-compose.yml

・・・・

db-test:
    image: mysql:5.7
    ports:
      - 3300:3306
      #このローカルのポート番号（左側のポート番号）は3306以外（開発環境のDBのポート番号以外）を指定する。
    expose:
      - 3306
    environment:
      MYSQL_ROOT_PASSWORD: password
      MYSQL_USER: user
      MYSQL_PASSWORD: password
      MYSQL_DATABASE: app_name_test
    volumes:
      - db-data:/var/lib/mysql

・・・・

その後コンテナをbuildし直す。

terminal

$ docker-compose down
$ docker-comose build
$ docker-compose up -d

またテスト用のDBについてcreateとmigrateを実行する。

terminal

$ docker-compose exec app rails db:create RAILS_ENV=test
$ docker-compose exec app rails db:migrate RAILS_ENV=test

その後、晴れてRspecによるテストを実行する。

terminal

docker-compose exec app bundle exec rspec