LoginSignup
0

More than 3 years have passed since last update.

【作成中】PIC16F1827 I2Cスレーブとして設定

Last updated at Posted at 2019-10-20

環境

・PIC16F1827
・MPLAB X IDE v5.25
・Arduino nano互換機(テスト用I2C Master)

参考にさせて頂いたサイト

Configuration Bit の設定

私がよく使う設定を流用。

main.c
// CONFIG1
#pragma config FOSC = INTOSC    // Oscillator Selection (INTOSC oscillator: I/O function on CLKIN pin)
#pragma config WDTE = ON        // Watchdog Timer Enable (WDT enabled)
#pragma config PWRTE = ON       // Power-up Timer Enable (PWRT enabled)
#pragma config MCLRE = ON       // MCLR Pin Function Select (MCLR/VPP pin function is MCLR)
#pragma config CP = OFF         // Flash Program Memory Code Protection (Program memory code protection is disabled)
#pragma config CPD = OFF        // Data Memory Code Protection (Data memory code protection is disabled)
#pragma config BOREN = ON       // Brown-out Reset Enable (Brown-out Reset enabled)
#pragma config CLKOUTEN = OFF   // Clock Out Enable (CLKOUT function is disabled. I/O or oscillator function on the CLKOUT pin)
#pragma config IESO = OFF       // Internal/External Switchover (Internal/External Switchover mode is disabled)
#pragma config FCMEN = OFF      // Fail-Safe Clock Monitor Enable (Fail-Safe Clock Monitor is disabled)

// CONFIG2
#pragma config WRT = OFF        // Flash Memory Self-Write Protection (Write protection off)
#pragma config PLLEN = ON       // PLL Enable (4x PLL enabled)
#pragma config STVREN = ON      // Stack Overflow/Underflow Reset Enable (Stack Overflow or Underflow will cause a Reset)
#pragma config BORV = HI        // Brown-out Reset Voltage Selection (Brown-out Reset Voltage (Vbor), high trip point selected.)
#pragma config LVP = ON         // Low-Voltage Programming Enable (Low-voltage programming enabled)

PICの初期化

内部クロックGPIOの初期化。

main.c
/void main(void)
    OSCCON = 0xF2;  /* 内部クロック:8MHz */
    ANSELA = 0x00;
    ANSELB = 0x00;
    TRISA = 0x00;
    TRISB = 0x00;
    PORTA = 0x00;
    PORTB = 0x00;

    ...

I2C初期設定

今回はスレーブモード、7bitアドレスモードで初期化。

main.c
    SSP1CON2 = 0x01;            /* クロックストレッチ有効 */
    SSP1CON3 = 0x00;            /* データホールド有効 */
    SSP1ADD = I2C_ADDR<<1;      /* スレーブアドレスの設定 */
    SSP1STAT = 0x00;            /* ハイスピードモード/ SM Bus無効 */
    SSP1CON1 = 0b00110110;      /* I2Cスレーブモード/7bitアドレスモード */

image.png
image.png
image.png
image.png

Register as a new user and use Qiita more conveniently

  1. You get articles that match your needs
  2. You can efficiently read back useful information
  3. You can use dark theme
What you can do with signing up
0