Help us understand the problem. What is going on with this article?

【作成中】PIC16F1827 I2Cスレーブとして設定

環境

・PIC16F1827
・MPLAB X IDE v5.25
・Arduino nano互換機(テスト用I2C Master)

参考にさせて頂いたサイト

http://kimamanilab.cocolog-nifty.com/blog/2016/05/pici2c-5dbb.html

Configuration Bit の設定

私がよく使う設定を流用。

main.c
// CONFIG1
#pragma config FOSC = INTOSC    // Oscillator Selection (INTOSC oscillator: I/O function on CLKIN pin)
#pragma config WDTE = ON        // Watchdog Timer Enable (WDT enabled)
#pragma config PWRTE = ON       // Power-up Timer Enable (PWRT enabled)
#pragma config MCLRE = ON       // MCLR Pin Function Select (MCLR/VPP pin function is MCLR)
#pragma config CP = OFF         // Flash Program Memory Code Protection (Program memory code protection is disabled)
#pragma config CPD = OFF        // Data Memory Code Protection (Data memory code protection is disabled)
#pragma config BOREN = ON       // Brown-out Reset Enable (Brown-out Reset enabled)
#pragma config CLKOUTEN = OFF   // Clock Out Enable (CLKOUT function is disabled. I/O or oscillator function on the CLKOUT pin)
#pragma config IESO = OFF       // Internal/External Switchover (Internal/External Switchover mode is disabled)
#pragma config FCMEN = OFF      // Fail-Safe Clock Monitor Enable (Fail-Safe Clock Monitor is disabled)

// CONFIG2
#pragma config WRT = OFF        // Flash Memory Self-Write Protection (Write protection off)
#pragma config PLLEN = ON       // PLL Enable (4x PLL enabled)
#pragma config STVREN = ON      // Stack Overflow/Underflow Reset Enable (Stack Overflow or Underflow will cause a Reset)
#pragma config BORV = HI        // Brown-out Reset Voltage Selection (Brown-out Reset Voltage (Vbor), high trip point selected.)
#pragma config LVP = ON         // Low-Voltage Programming Enable (Low-voltage programming enabled)

PICの初期化

内部クロックGPIOの初期化。

main.c
/void main(void)
    OSCCON = 0xF2;  /* 内部クロック:8MHz */
    ANSELA = 0x00;
    ANSELB = 0x00;
    TRISA = 0x00;
    TRISB = 0x00;
    PORTA = 0x00;
    PORTB = 0x00;

    ...

I2C初期設定

今回はスレーブモード、7bitアドレスモードで初期化。

main.c
    SSP1CON2 = 0x01;            /* クロックストレッチ有効 */
    SSP1CON3 = 0x00;            /* データホールド有効 */
    SSP1ADD = I2C_ADDR<<1;      /* スレーブアドレスの設定 */
    SSP1STAT = 0x00;            /* ハイスピードモード/ SM Bus無効 */
    SSP1CON1 = 0b00110110;      /* I2Cスレーブモード/7bitアドレスモード */

image.png
image.png
image.png
image.png

Why not register and get more from Qiita?
  1. We will deliver articles that match you
    By following users and tags, you can catch up information on technical fields that you are interested in as a whole
  2. you can read useful information later efficiently
    By "stocking" the articles you like, you can search right away
Comments
No comments
Sign up for free and join this conversation.
If you already have a Qiita account
Why do not you register as a user and use Qiita more conveniently?
You need to log in to use this function. Qiita can be used more conveniently after logging in.
You seem to be reading articles frequently this month. Qiita can be used more conveniently after logging in.
  1. We will deliver articles that match you
    By following users and tags, you can catch up information on technical fields that you are interested in as a whole
  2. you can read useful information later efficiently
    By "stocking" the articles you like, you can search right away
ユーザーは見つかりませんでした