STM32L010とGPIOで800khz(1.25us)を作る

x Mbedのリビジョン143

目的
GPIOのテスト
WS2812Bの前段階

#include "mbed.h"

//myled         1.827Mhz 010
//GPIOA->ODR    7,995Mhz 010

#define on1   0b0000000000010000
#define off1  0b0000000000000000

DigitalOut myled(PA_4);

int main() {

    __disable_irq(); // disable interrupt
    //__enable_irq(); // enable interrupt

    //GPIO bkup
    int ii  = GPIOA->ODR;

//    //                        1234567890123456
//    int on1  = GPIOA->ODR | 0b0000000000010000;
//    int off1 = GPIOA->ODR & 0b1111111111101111;


   //1:1
    while(1) {

        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;

        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;

    }//while


// 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 

/*
   //0.3us 800khz
    while(1) {

        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;

        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;


    }//while
*/


// 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

/*
   //1us 800khz
    while(1) {

        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;
        GPIOA->ODR = on1;

        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;
        GPIOA->ODR = off1;

    }//while
*/


}//main